CASO DESIGN 1834 Electric Coffee Grinder Instruction Manual
- June 1, 2024
- caso DESIGN
Table of Contents
- CASO DESIGN 1834 Electric Coffee Grinder
- 1. General
- 2. Safety
- 3. Commissioning
- PLEASE NOTE
- PLEASE NOTE
- 3.5 Electrical connection
- 4 Design and Function
- 5. Operation and Handing
- PLEASE NOTE
- 6. Cleaning and Maintenance
- 7. Troubleshooting
- 8. Disposal of the Old Device
- 9. Guarantee
- Frequently Asked Questions (FAQ):
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CASO DESIGN 1834 Electric Coffee Grinder
INSTRUCTION MANUAL
1. General
Please read the information contained herein so that you can become familiar with your device quickly and take advantage of the full scope of its functions. Your device will serve you for many years if you handle it and care for it properly. We wish you a lot of pleasure in using it!
1.1 Information on this manual
These operating instructions are a component of the electric coff ee grinder “BaristaChef Inox” (referred to hereafter as the Device) and provide you with important information for the initial commissioning, safety, intended use and care of the device.
The Operating Instructions must be available at all times at the device. This Operating Manual must be read and applied by every person who is instructed to work with the device:
- Commissioning,
- Troubleshooting and/or
- Operation,
- Cleaning
Keep the Operating Manual in a safe place and pass it on to the subsequent owner along with the device.
1.2 Warning notices
The following warning notices are used in the Operating Manual concerned here.
DANGER
A warning notice of this level of danger indicates a potentially dangerous
situation.
If the dangerous situation is not avoided, this can lead to death or serious
injuries.
Observe the instructions in this warning notice in order to avoid the danger of death or serious personal injuries.
WARNING
A warning notice of this level of danger indicates a possible dangerous situation. If the dangerous situation is not avoided, this can lead to serious injuries.
Observe the instructions in this warning notice in order to avoid the personal injuries.
ATTENTION
A warning notice of this level of danger indicates a possible dangerous
situation.
If the dangerous situation is not avoided, this can lead to slight or moderate
injuries.
Observe the instructions in this warning notice in order to avoid the personal injuries.
PLEASE NOTE
A notice of this kind indicates additional information, which will simplify the handling of the machine.
1.3 Limitation of liability
All the technical information, data and notices with regard to the installation, operation and care are completely up-to-date at the time of printing and are compiled to the best of our knowledge and belief, taking our past experience and fi ndings into consideration.
No claims can be derived from the information provided, the illustrations or descriptions in this manual.
The manufacturer does not assume any liability for damages arising as a result of the following:
- Non-observance of the manual
- Uses for non-intended purposes
- Improper repairs
- Technical alterations, modifi cations of the device
- Use of unauthorized spare parts
Modifi cations of the device are not recommended and are not covered by the guarantee. All translations are carried out to the best of our knowledge. We do not assume any liability for translation errors, not even if the translation was carried out by us or on our instructions. The original German text remains solely binding.
1.4 Copyright protection
This document is copyright protected. CASO GmbH reserves all the rights,
including those for photomechanical reproduction, duplication and distribution
using special processes
(e.g. data processing, data carriers, data networks), even partially. Subject
to content and tech-nical changes.
2. Safety
This chapter provides you with important safety notices when handling the device. The device corresponds with the required safety regulations. Improper use can result in personal or pro-perty damages.
2.1 Intended use
This device is only intended for use in households in enclosed spaces for
- Coffee bean grinder
This device is intended for use in the household and for similar applications such as:
- in kitchens for employees in shops, offi ces, and other commercial areas;
- in B&Bs,
- in agricultural estates;
- by customers in hotels, motels and other residential establishments.
Uses for a diff erent purpose or for a purpose which exceeds this description are considered incompatible with the intended or designated use.
WARNING
Danger due to unintended use!
Dangers can emanate from the device if it is used for an unintended use and/or
a diff erent kind of use.
- Use the device exclusively for its intended use.
- Observe the procedural methods described in this Operating Manual.
Claims of all kinds due to damages resulting from unintended uses are excluded. The User bears the sole risk.
2.2 General Safety information
PLEASE NOTE
Please observe the following general safety notices with regard to the safe handling of the device.
-
Children must not use this appliance. Keep the appliance and its power sup-ply unit away from children.
-
The device may be used by individuals with reduced physical,
sensory or mental capabilities or a lack of experience and / or knowledge of their use if they are supervised or have been instructed at to the safe use of the device and have understood the resulting hazards. -
Children shall not play with the appliance.
-
Use the appliance only as described in the user’s guide to avoid possible injury from misuse.
-
Operate the appliance only in dry indoor areas.
-
Do not operate the appliance unattended.
-
Do not use the appliance:
• if the appliance itself or parts are damaged,
• if the power cord or plug is damaged,
• if the appliance has been dropped. -
Make sure that the power socket is easily accessible so that you can quickly unplug the device if required.
-
Do not make any modifi cations to the appliance or the power cord. Only have repairs carried out by a specialist workshop, as appliances that have not been repaired properly endanger the user. Please also observe the enclosed warranty conditions.
-
Only use the device with original accessories.
-
Place the appliance on a stable, level surface. Ensure suffi cient distance between the appliance and strong heat sources such as hotplates, heating pipes, etc.
-
Do not clean the appliance with hard, scratchy or abrasive cleaning agents such as steel wool or similar.
-
Cleaning and user maintenance shall not be made by children.
-
Defective components must always be replaced with original replacement parts. Only such parts will guarantee that the safety requirements are fulfi lled.
-
Carefully clean all components that will come in contact with food befor fi rst use.
-
Use the device continuously for a maximum of 3 minutes. Then let the device coold down for 10 minutes.
-
Do not immerse the appliance in water or other liquids. Do not put it in the dishwasher.
PLEASE NOTE
- Do not overload the device and do not let it operate un-loaded.
- Be sure the parts are properly assembled to original base and in place.
2.3 Sources of danger
2.3.1 Danger of injury
Careless use of the appliance may result in injury. Note the following warnings to avoid injury.
Never use your fi nger os tools to push ingredients deeper while the device
is running.
Disconnect the device from mains power if it is unsupervised; before assemb-
ling it; when changing over accessories and when disassembling or cleaning it.
Turn the device off and disconnect it from mains power before changing over
accessories or installing spare parts which move during operation.
Stop processing of food immediately if rotating accessories no longer turn
or only turn with diffi culty and unplug the device.
2.3.2 Dangers due to electrical power
DANGER
Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or subassemblies! Observe the following safety notices to avoid dangers due to electrical power:
- If the power cord of this appliance is damaged, it must be replaced by the manufacturer or its customer service or a similarly qualifi ed person in order to avoid hazards.
- Do not open the housing on the device under any circumstances. There is a danger of an electrical shock if live connections are touched and the electrical or mechanical structure is altered. In addition, functional faults on the device can also occur.
- Do not immerse the appliance in water for cleaning.
3. Commissioning
This chapter provides you with important safety notices during the initial commissioning of the device. Observe the following notices to avoid dangers and damages:
3.1 Packaging safety information
WARNING
Packaging materials may not be used for playing. There is a danger of suff ocation.
**3.2 Delivery scope and transport inspection The device includes the
following components:**
- BaristaChef Inox
- portafi lter holder
- cleaning brush PLEASE NOTE
- lid
- collection container
- operating manual
PLEASE NOTE
- Examine the shipment to ensure the unit and manual are included and inspect the unit for any visible damage.
- Immediately notify the carrier and/or the supplier about an incomplete shipment or any damage as a result of inadequate packaging or mishandling.
3.3 Unpacking
Carefully remove the packaging material and unit from the carton.
PLEASE NOTE
If possible, keep the original packaging for the duration of the guarantee period in the event a return is necessary.
3.4 Setup location requirements
In order to ensure the safe and trouble-free operation of the device, the setup location must fulfi l the following prerequisites:
- Place the device on a fi rm and even work surface.
- Choose the setup location in such a way that children cannot reach any hot surfaces on the device.
- The device is not intended to be installed in a wall or a built-in cupboard.
- Do not use the device outdoors.
- Do not set up the device in a hot, wet or extremely damp environment or near fl ammable material.
- The installation and assembly of this device in non-stationary setup locations (e.g. on ships) must be carried out by specialist companies / electricians, provided they guarantee the prerequisites for the safe use of this device.
3.5 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions must be observed for the electrical connection:
- Before connecting the device, compare the connection data (voltage and frequency) on the rating plate with those of your electrical network. This data must agree in order that no damages occur in the device. If in doubt, ask your qualifi ed electrician.
- The connection between the device and the electrical network may employ a 3 meter long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs or gangs is prohibited because of the danger of fi re that is involved with this.
- Make sure that the power cable is undamaged and has not been installed under the ice maker or over hot or sharp surfaces.
- The electrical outlet must be protected by a 16A safety cut-out switch.
- The electrical safety of the device is only guaranteed if the device is connected to a properly installed protective conductor system. If in doubt, have the house installation checked over by a qualifi ed electrician. The manufacturer cannot be made responsible for damages that are caused by a missing or damaged protective conductor.
4 Design and Function
This chapter provides you with important safety notices on the design and function of the device.
4.1 Overview
1.Bean container lid
2. Bean container
3. Control ring for coarseness
4. Grinding mechanism
5. Coarseness ring
6. Operating panel
7. Coff ee ground outlet
8. Portafi lter holder
9. Cleaning brush
10. Silicone cover
11. Collection container lid
12. Collection container
4.2 Controlelements
13. Display: Shows the number of cups or grinding time
14. “Cup” button has been selected
15. “Time” button has been selected
16. “Cup” button: To select the number of cups (2-12 cups)
17. “Start/Stop” button: To start and stopthe device
18. “Time” button: To set the grindingtime (1-40 seconds)
4.3 Assembling
1. Place the device on a fl at surface.
2. Check that the grinding mechanism (4) is sitting correctly in the base of
the device (see
the illustration in the “Cleaning and care” section).
3. Place the bean container (2) on the appliance. The arrow next to the
control ring for coarseness (3) on the front should point to the symbol on the
base of the device.
4. Turn the bean container to tighten it. The arrow should point to the
symbol and the bean container should click into place.
4.3.1 Assembly for use with the collection container
1. Assemble the device as described above.
2. Remove the silicone cover (10) from the collection container lid (11) and
place the collection container (12) under the coff ee ground outlet (7).
4.3.2 ssembly for use with the portafi lter holder
1. Assemble the device as described above.
2. Attach the portafi lter holder (8) to the three screws on the base of the
device by placing the holes in the holder over the screws on the base and then
pushing the holder down onto the device.
3. You can use portafi lters with a diameter from 52 to 58 mm. Portafi lters
with a diameter of 58 mm can be placed directly on the stainless steel holder.
If the portafi lter has a small diameter (52 mm), then you must
use the plastic attachment. Place the attachment directly onto the stainless
steel holder.
4.4 Rating plate
The rating plate with the connection and performance data can be founded beneath the device.
5. Operation and Handing
This chapter provides you with important notices with regard to operating the device. Observe the following notices to avoid dangers and damages:
WARNING
Do not leave the device unsupervised when it is in operation, so that you can intervene quickly in the event of dangers.
PLEASE NOTE
Do not leave the device unsupervised when it is in operation, so that you can intervene quickly in the event of dangers.
PLEASE NOTE
- When using for the fi rst time little smell occurs. This is harmless and disappears after a while.
- Device will not operate if parts are not assembled properly.
5.1 Before fi rst use
Clean the device, see “cleaning“.
5.2 Notes and grinding tips
- The taste and strength of coff ee are personal preferences. To get the taste you prefer, try changing the type of coff ee bean; amount of coff ee and the coarseness.
- Always grind the coff ee grounds freshly for the number of cups you want to make.
- Coff ee beans should be stored in a cool, dry, dark place but not in the refrigerator.
- Clean the grinding mechanism regularly. Coff ee ground residues can impair fl avour.
- Only use the device to grind coff ee beans. It is not suitable for grinding of very wet, oily or extremely hard ingredients. Do not use the device to grind strong spices as this can impair the fl avour of the coff ee grounds.
- The fl avour of coff ee-based drinks depends on the quality of the coff ee beans used.
5.3 Grinding coff ee
1. Pour the coff ee beans into the bean container and place its lid on top of
it.
2. Either place the collection container under the coff ee ground outlet or
attach the portafi l-ter holder to the base of the device.
3. To set the desired coarseness, turn the coarseness ring (5) to the right
(= fi ne coff ee grounds) or the left (= coarser coff ee grounds).
Recommendation for coarseness
4. Plug the power socket into mains power.
5. Press any one of the three buttons to turn on the device.
6. Press the -button to set the desired number of cups. You can select 2-12
cups in 2-cup increments.
7. Alternatively, set the grinding time by pressing the -button until you
reach the desired time. You can select a grinding time of 1-40 seconds. To set
the seconds more quickly, keep the button pressed down.
8. To start the grinding process, press the -button.
9. The device will beep twice when the grinding process has fi nished.
10. If you want to stop the grinding process earlier, press the -button
again.
11. You can now remove the collection container or the portafi lter.
12. Press the -button to turn off the device when you have fi nished using
it.
Using the portafi lter holder:
- Move the portafi lter backwards and forwards to make sure that it is fi lled evenly.
- If necessary, stop the grinding process manually by pressing the -button.
- For exact portions, use a highly accurate weighing scale (1 g increments).
PLEASE NOTE
- The device will automatically switch to standby mode if it is not used for more than 1 minute.
- If you select coarse grinding and a long grinding time or a large number of cups, then the collection container will be too small. Place another container which is large enough under the coff ee ground outlet.
Collection container capacity:
Use the settings described above as a starting point or recommendation. After just a short time using the device you will have no problems choosing your preferred setting.
6. Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining the device. Please observe the notices to prevent damages due to cleaning the device incorrectly and to ensure trouble-free operation.
6.1 Safety information
ATTENTION
Please observe the safety instructions, before cleaning your device:
- Unplug the device when not in use and before any cleaning.
- Never immerse the motor unit, cord or plug in water or other liquids and do not place in the dishwasher.
- Do not use iron brush, abradant kitchen cleaner, or sharp cleaning tool for cleaning.
- Do not use any aggressive or abrasive cleaning agents or solvents.
6.2 Cleaning
PLEASE NOTE
- You can use the provided cleaning brush.
- Motor unit and cable should not come into contact with water. Wipe the motor unit and the cable only with a damp soft cloth.
1. Remove the coff ee beans from the bean container (2) and remove the
container from the base of the device.
2. If applicable, also remove the portafi lter holder (8).
3. Use warm soapy water to clean the bean container (2), the bean container
lid (1), the portafi lter holder (8), the collection container (12) and the
collection container lid (11) and dry them thoroughly.
4. If necessary, wipe the external surfaces of the base of the device with a
clean, damp cloth before drying it thoroughly.
6.3 Cleaning the grinding mechanism
PLEASE NOTE
- Handle the grinding mechanism and the grinding auger with care. They may be sharp.
Risk of injury!
1. Lift the grinding mechanism’s handle, then turn it anti-clockwise to
remove it from the grinder.
2. Use the cleaning brush supplied with the grinder to clean the grinding
mechanism and the grinding auger underneath it.
3. Put the grinding mechanism back on the grinder and turn it clockwise until
it clicks into place.
7. Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
7.1 Safety notices
ATTENTION
- Repairs of electrical appliances must be carried out by qualifi ed person who are trained by the manufacturer.
- Repairs performed by untrained persons may result in considerable hazards for the user and damage the machine.
7.2 Troubleshooting table
Problem | Solution |
---|---|
Thedevicedoes notstart. | Pleasecheck whetherthe plug isproperly plugged in. |
Thedisplayshows”E1″andthe but tonsdon’t vvork. | Thedeviceisoverheated. |
Removethe plugfrom the socket.Letthedevicecool dc,,,vn 10minutes before
youtryusing itagain.
Thedisplayshows”E3″and allthe buttonsflash.| The bean containerisnot correctly
installed.Assemble thedevicecorrectly.
The motorstarts but nocoffee groundscomeout ofthecoffee ground outlet
orthedevicestops suddenlyduring thegrinding process.| Thedeviceisblocked.Tum
theappliance offand remo vethe beancontainer.Clean thegrinding mechanism
andthegrinding auger.
PLEASE NOTE
- If you cannot solve the problem by carrying out the steps described above, our Customer Service will help you free of charge.
- Clean the device before you send it to customer service.
8. Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable
materials.
However, they also contain damaging substances, which were necessary for their
functionality and safety. If these were put in the non-recyclable waste or
were handled incorrectly, they could be detrimental to human health and the
environment.
Therefore, do not put your old device into the non-recyclable waste under any
circumstances.
PLEASE NOTE
- Utilise the collection point, established in your town, to return and recycle old electric and electronic devices. If necessary, contact your town hall, local refuse collection service or your dealer for information.
- Ensure that your old device is stored safely away from children until it is taken away.
8.1 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging materials are selected in accordance with environmentally compatible and recycling-related points of view and can therefore be recycled. Returning the packaging back to the material loop saves raw materials and reduces the quantities of accumulated waste. Take any packaging materials that are no longer required to “Green Dot” recycling collection points for disposal.
9. Guarantee
We provide a 24-month guarantee for defects caused by production or material faults, begin-ning on the date of purchase. Our guarantee is valid for Germany, Austria and the Netherlands. For all other countries, please contact us.
Your legal guarantee claims as per Art. 437 ff . German Civil Code (BGB) will remain unaff ected by this. You may exercise your statutory guarantee rights free of charge. The guarantee does not cover damage caused by improper handling or use of the product or defects which have only a minor impact on the product’s functionality or value. In addition to this, the guarantee also excludes parts which are subject to wear and tear; transport damages insofar as we are not responsible for them and damages caused by repairs which were not carried out by us.
This product has been constructed for non-commercial use (domestic use) and its perfor-mance is designed to meet the corresponding needs. The guarantee only covers commercial use insofar as it is comparable to domestic use. The product is not intended for any other type of commercial use.
In the case of legitimate complaints we may either repair the defective product or replace it with a defect-free product at our discretion. Obvious defects must be notifi ed to us within 14 days of the product’s delivery. Any further claims are excluded.
When making a guarantee claim please contact us before you return the product (always with the purchase receipt!). Our contact details (“Guarantor”) are provided at the beginning of this instruction manual.
Frequently Asked Questions (FAQ):
Q: How often should I clean the product?
A: It is recommended to clean the product after every use to maintain optimal performance.
Q: Can I use the product without reading the manual?
A: It is strongly advised to read the manual thoroughly before operating the product to ensure safety and proper usage.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>