caso DESIGN 11301 One Touch Cordless Vacuum Sealer User Manual

caso DESIGN 11301 One Touch Cordless Vacuum Sealer

Operating Manual

General
Please read the information contained herein so that you can become familiar with your device quickly and take advantage of the full scope of its functions.
Your One Touch Cordless Vacuum Sealer will serve you for many years if you handle it and care for it properly. We wish you a lot of pleasure in using it!

Information in this manual
These Operating Instructions are a component of One Touch Cordless Vacuum Sealer (referred to hereafter as the device) and provide you with important information for the initial commissioning, safety, intended use and care of the device. The Operating Instructions must be available at all times at the device. This Operating Manual must be read and applied by every person who is instructed to work with the device:

• Commissioning
• Troubleshooting and/or
• Operation
• Cleaning

Keep the Operating Manual in a safe place and pass it on to the subsequent owner along with the device.

Limitation of liability
All the technical information, data and notices with regard to the installation, operation and care are completely up-to-date at the time of printing and are compiled to the best of our knowledge and belief, taking our past experience and findings into consideration. No claims can be derived from the information provided, the illustrations or descriptions in this manual. The manufacturer does not assume any liability for damages arising as a result of the following:

• Non-observance of the manual
• Improper repairs
• Use of unauthorized spare parts
• Uses for non-intended purposes
• Technical alterations, modifications of the device

Modifications of the device are not recommended and are not covered by the guarantee.

All translations are carried out to the best of our knowledge. We do not assume any liability for translation errors, not even if the translation was carried out by us or on our instructions. The original German text remains solely binding.

Warning notices
The following warning notices are used in the Operating Manual concerned here.

Danger
A warning notice of this level of danger indicates a potentially dangerous situation. If the dangerous situation is not avoided, this can lead to death or serious injuries.

• Observe the instructions in this warning notice in order to avoid the danger of death or serious personal injuries.

Warning

A warning notice of this level of danger indicates a possibly dangerous situation.
If the dangerous situation is not avoided, this can lead to serious injuries.

• Observe the instructions in this warning notice in order to avoid personal injuries.

Attention

A warning notice of this level of danger indicates a possibly dangerous situation.
If the dangerous situation is not avoided, this can lead to slight or moderate injuries.

• Observe the instructions in this warning notice in order to avoid personal injuries.

Please note
A notice of this kind indicates additional information, which will simplify the handling of the device.

Copyright protection
This document is copyright protected. CASO Design USA LLC reserves all the rights, including those for photomechanical reproduction, duplication, and distribution using special processes (e.g. data processing, data carriers, data networks), even partially. Subject to content and technical changes.

Safety

This chapter provides you with important safety notices. Improper use can result in personal or property damages.

Intended use
The hand vacuum sealer is intended for vacuuming zip bags, vacuum canisters or WineLocks (with a connection suitable for the hand vacuum sealer). The ZIP bags and vacuum canisters are designed for vacuuming and storing, heating and freezing food.

Warning
Danger due to unintended use! Dangers can emanate from the device if it is used for unintended use and/or a different kind of use.

• Use the device exclusively for its intended use.
• Observe the procedural methods described in this Operating Manual.

Claims of all kinds due to damages resulting from unintended uses are excluded. The User bears the sole risk.

Warning
Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Please note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions must be observed for the electrical connection:

• Before connecting the device, compare the connection data (voltage and frequency) on the rating plate with those of your electrical network. This data must agree in order that no damages occur in the device. If in doubt, ask your qualified electrician.

Sources of danger

Danger of burns

Danger
The sealing bar gets very hot. Please observe the following safety notice in order not to burn yourself or others.

• To avoid getting burned, never touch the sealing bar directly after the sealing process.

Danger of fire

Danger
There is a danger of fire due to the event the device is not used properly. Observe the following safety notices to avoid the dangers of fire:

• Do not set up the device near flammable material.
• Keep this appliance away from sources of heat (gas, electric, burner, heated oven).

Dangers due to electrical power

Danger Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or subassemblies! Observe the following safety notices to avoid dangers due to electrical power:

• Do not operate this device if it has a damaged cable or plug, if it is not working properly or if it has been damaged or dropped. If the power cable or plug are damaged, then they must be replaced by the manufacturer or its service agent in order to avoid a hazard.
• Do not open the housing on the device under any circumstances. There is a danger of an electrical shock if live connections are touched and the electrical or mechanical structure is altered. In addition, functional faults on the device can also occur.
• Before plugging the appliance in or when you operate it, make sure your hands are dry.
• Do not insert objects into the openings of the device.

Commissioning

This chapter provides you with important safety notices during the initial commissioning of the device. Observe the following notices to avoid dangers and damages:

Safety information

Warning
Personal and property damages can occur during the commissioning of the device! Observe the following safety notice to avoid such dangers:

• Packaging materials may not be used for playing. There is a danger of suffocation.

Delivery scope and transport inspection
As a rule, this article is delivered with the following components:

• One Touch Cordless Vacuum Sealer
• Operation manual
• 2 1 quart vacuum ZIP-Bags (reusable)
• 1 glass canister 17 oz
• 1 ZIP-Locker
• USB-cable type C

Please note

• Examine the shipment for its completeness and for any visible damages.
• Immediately notify the carrier, the insurance and the supplier about any incomplete shipment or damages as a result of inadequate packaging or due to transportation.

Disposal of the packaging
Caso believes in the importance of recycling and has selected packaging materials that not only protect your unit from damage during transit, but can be recycled to minimize any ecological impact. Recycling the packaging materials preserves raw materials and reduces waste. Take any packaging materials that are no longer required to a recycling collection point for proper disposal.

Please note

• If possible, keep the original packaging for the device for the duration of the guarantee period of the device, in order that the device can be re-packaged properly in the event of a guarantee claim.

Operation and Handing

ZIP-bags, vacuum canister or WineLocks can be vacuumed with the hand-held vacuum sealer.

Warning
Personal and property damages can occur during commissioning of the device! Observe the following safety notice to avoid such dangers:

• The device must not absorb liquids or powders directly (e.g. water, oil, flour).
• If you notice that the device is sucking in liquids or powder, stop the vacuum operation immediately by pressing the ON / OFF button.
• Then let the device run freely without contact with bags or canisters so that the remaining liquid or powder can be pumped out of the pump.
• Then clean the device.
• We recommend freezing liquid or soft food before vacuum operation.

Overview

1. ON/OFF button with LED
2. Silicon gasket
3. Air outlet (must not be covered)
4. USB-port type C

LED and battery symbol

1. The LED lights up constantly white during the vacuum operation
2. The device stops the vacuum operation automatically and the white LED switches off.
3. The LED flashes red when the battery is weak and during charging.
4. The LED lights up constantly white as soon as the battery is charged.

Charging the battery
Charge the device at least every 3 to 6 months to ensure optimal battery function. Charge the device fully before using it for the first time. To charge the device connect the USB cable with USB charger and the USB port of the device. The charging process can take about 4 hours.

Please note
If the device is started unintentionally, when you are not performing a vacuum operation, then the device switches itself off after approx. 2 minutes to protect its battery.

Vacuuming a ZIP-bag

Put the food in the zip bag. Close the zip bag tightly with the help of a ZIP Locker and check that the zip lock is closed properly. Place the device on the valve of the bag and gently press it down. Press the ON / OFF button of the device. Then air is withdrawn from the bag.

The vacuum operation is automatically stopped when the vacuum is reached. The vacuum operation can be stopped at any time by pressing the ON / OFF button. Carefully lift the device sideways from the valve of the bag.

Please note

• Be careful that the valve and the zip lock are tightly closed.
• The opening of he ZIP-bag must be completely clean and dry.
• Be careful that the valve on the inside of the ZIP-bag does not come into contact with the content.
• Be careful that the food in the bag is approx. 0.8 inch away from the valve.

Opening a ZIP-bag
To make it easier to open the bag, pull the vacuum valve on the valve cover to the side so that air can again enter the bag. Carefully open the zip lock and remove the food.

Suitability of the ZIP-bags
The bags are suitable for the freezer, for the dishwasher and they are reusable.

You can heat the bags with their contents in the microwave for a maximum of 12 minutes at 650 W. To do this, open the closure of the ZIP-bag. The bags are boil-proof for up to 8 hours at 212 °F (suitable for sous vide). Be careful that the valve and the zipper do not come into contact with the water, as otherwise liquid could enter the bag.

Warning
Handle the bags and the food carefully, there is a risk of burns. Use pot holders or something similar if necessary.

Vacuum a canister
You can also vacuum suitable canisters with the device, e.g. CASO Vacuum Canister Set 3000 (11177).

• Fill the canister and leave 1.2 inch free to the upper edge. Place the lid on the canister.
• Lightly press down the lid of the canister at the beginning of the vacuum operation.
• Place the device at the middle of the valve on the canister lid and press it down slightly.
• Press the ON/OFF button of the device and air will be withdrawn form the canister.

Heating and freezing canisters
Without lid these canisters can be used to heat food in the microwave. Without lid, you can also use them to heat food in your oven (up to 662 °F).

Warning
Please be careful when handling heated canisters and food, as there is a risk of scalding. Use potholders or similar items as necessary.

You can also use these canisters to freeze food (down to -0.4 °F). When filling, please remember that frozen food can expand.

Warning

• Do not use frozen canister in the oven.
• Also do not clean hot canister with cold/wet damp cloth. Let them cool down.
• Do not heat the canister directly on fire.

Opening canisters
Push vacuum valve to one side to let air in.

Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining the device. Please observe the notices to prevent damages due to cleaning the device incorrectly and to ensure trouble-free operation.

Safety information

Attention
Please observe the following safety notices, before you commence with cleaning the device:

• Do not clean the device or its components, the canisters or the ZIP-bags with aggressive or abrasive cleaning agents. Do not use solvents.
• The device and its components as well as the ZIP-bags must be cleaned after each use. Failure to keep these items in a clean condition can result in a dangerous condition, as well as in the growth of fungus and bacteria.
• Do not scratch off stubborn dirt with hard items.

Cleaning

One Touch Cordless Vacuum Sealer:
Before cleaning disconnect the device from the charger. Only clean it with a dry soft cloth. The device and its components are not suitable for the dishwasher. To clean the silicon gasket, remove it form the housing by gently pulling it down. Clean it with warm water and then dry it as well. Then reassemble the device correctly.

ZIP bag:
You can clean the ZIP bags in warm soapy water or in the dishwasher and then reuse them again.

To clean the valve of the zip bag separetely, remove the outer valve cover and the inner silicon part and clean them with warm water. Then carefully dry and assemble them again.

Attention
ZIP bags that were used to store raw meat, fish or fatty foods, or for warming or SousVide cooking, should not be reused.

Glass canister:
Clean your glass canister before first use and after each use. You can clean the canister and its lids in warm soapy water or in the dishwasher. Dry the parts after cleaning.

Troubleshooting

This chapter provides you with important notices with regard to operating the device. Observe the following notices to avoid dangers and damages:

Safety notices

Attention

• Only qualified electricians, who have been trained by the manufacturer may carry out any repairs on electrical equipment.
• Improperly performed repairs may result in personal injury or damage to the device.

Troubleshooting table

The device stops during the vacuum operation and does not switch on again.

| ****

The device sucked in liquid or powder..

| Do not turn the device over. Shake the device gently to remove powder or liquids. Make sure the device is completely dry.

Press the ON / OFF button. Additional liquids may drip out. Repeat this process when the device stops again.

The device does not create vacuum when placed on a canister or the vacuum does not last.

| The lid of the canister, the silicon gasket or the valve are positioned incorrectly.| ****

Check that the positioning is correct and that the lid is properly closed.

The silicon gasket or the valve or the canister are dirty or wet| Clean and dry the silicon gasket and the valve of the canister.

The device is placed too loosely on the valve.

| During vacuum operation press the device slightly on the valve so that no air can escape.
The device does not respond to the ON/OFF button.| The battery of the device is low or not charged.| Charge the battery

Please note
If you are unable to solve the problem with the steps shown above, please contact Customer Service.

Disposal of the Old Device

Old electric and electronic devices frequently still contain valuable materials. However, they also contain damaging substances, which were necessary for their functionality and safety. If these were put in the non- recyclable waste or were handled incorrectly, they could be detrimental to human health and the environment. Therefore, do not put your old device into the non-recyclable waste under any circumstances.

Please note

• Utilize the collection point, established in your town, to return and recycle old electric and electronic devices. If necessary, contact your town hall, local refuse collection service or your dealer for information.
• Ensure that your old device is stored safely away from children until it is taken away.

Guarantee

Caso USA WARRANTY
We provide a 12 month guarantee for this product, commencing from the date of sale, for faults which are attributable to production or material faults.

Your legal guarantee entitlements in accordance with § 439 ff. BGB-E remain unaffected by this. The guarantee does not include damages, which were incurred as a result of improper handling or use, as well as malfunctions which only have a minor effect on the function or the value of the device. Consumables, transit damages, inasmuch as we are not responsible for these, as well as damages, which were incurred as a result of any repairs that were not performed by us, are also excluded from the guarantee entitlements.

This device is designed for use in domestic situations and has the appropriate performance levels. Any use in commercial situations is only covered under the guarantee to the extent that it would be comparable with the stresses of being used in a domestic situation. It is not intended for any additional, commercial use. In the event of justified complaints, we will repair the faulty device at our discretion or replace it with a comparable trouble-free device. Any pending faults must be reported within 14 days of delivery. All further claims are excluded.

To enforce a guarantee claim, please contact us prior to returning the device (always provide us with proof of purchase) and after this contact, ship the unit back to Caso USA for repair or replacement at our option.

Info@CasoDesignUSA.com.

Technical Data

Info@CasoDesignUSA.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>