EarPhone Connection Air Pro Wireless APX PTT Combo Kit for Earbuds Instruction Manual

June 6, 2024
EarPhone Connection

AIR PRO WIRELESS
FOR MOTOROLA APX PTT COMBO KIT
FOR WIRELESS EARBUDS

EarPhone Connection Air Pro Wireless AP PTT Combo Kit for Earbuds-
MAIN
Visit our YouTube Channel: EPC Headsets for videos about Pairing the Air Pro Wireless PTT Combo Kit.

AIR PRO WIRELESS PTT COMBO KIT INCLUDES:

EarPhone Connection Air Pro Wireless AP PTT Combo Kit for Earbuds-
FIG1

USE WITH ALL YOUR FAVORITE WIRELESS EARBUD BRANDS.

Wireless Earbuds Not Included.

EarPhone Connection Air Pro Wireless AP PTT Combo Kit for Earbuds-
FIG2

PAIRING EARBUDS TO THE BTD BLUETOOTH RADIO ADAPTER:

  1. Attach the Bluetooth adapter to the radio. Power up radio. Bluetooth adapter LED will flash blue/red. Now it’s in a pairing state. Power up your Bluetooth earbuds and put them into a pairing state. When the radio adapter LED is solid blue, paring is complete. Power down radio and earbuds.
    Note: To set up a pairing state with earbuds with a charging case, press and hold the button on the case until LED is flashing then release.

  2. Pairing BTR Bluetooth Remote Switch to Bluetooth Radio Adapter. With the radio off, hold down the PTT button on the radio adapter making sure not to completely cover the LED. While holding down, turn on the radio at the same time until LED is flashing blue/red then release. Short press again then release. The LED will flash slow blue/red. Now the radio adapter is in a paring state. Now, press and hold the PTT button on the remote switch until LED is flashing blue/red then release. When the LED on the radio adapter turns blue paring is complete. Now power up earbuds. Wait about 15 seconds for everything to link up. Now you are ready to transmit.

NOTES:

  • To power down the remote switch press and hold the PTT button until LED turns RED or if all devices are powered off the remote switch will power down in 5 minutes.
  • If no LED appears when trying to pair, connect the USB cable to charge for about 10 minutes. Full charge is about 3.5 hours.
  • Earbuds can be activated from the pairing button on the BTD radio adapter as well.
  • If the BTR buttons do not power up during pairing, let charge for about ten minutes then try again.
  • For all-day use, BTR remote button should charge for about 3.5 hours.
  • When the Bluetooth slide switch is in the off position no Bluetooth device can be used. This is effective if you want to use the radio with no microphone attached (see backside for instructions). In this state, you can transmit and receive through the radio.
  • Leave the Bluetooth switch “On” to use the Wireless PH unit.

TO CONNECT WIRED HEADSETS:

  1. Make sure the Bluetooth microphones are off.
  2. Hold the microphone cable above the arrow alignment mark.
  3. Align with an arrow on the adapter then click into place.
  4. To remove, pull up on the spring-loaded cylindrical metal below the arrow on the cable.

EarPhone Connection Air Pro Wireless AP PTT Combo Kit for Earbuds-
FIG3 Note: Not compatible with Motorola Radios using Built-In Bluetooth.
Note: When the Bluetooth slide switch is in the off position no Bluetooth device can be used. This is effective if you want to use the radio with no microphone attached. In this state, you can transmit and receive through the radio.
Leave the Bluetooth switch on to use the Wireless PTT unit.

MANUFACTURER’S LIMITED WARRANTY

Your Sales Receipt is required to validate & obtain warranty services. Your Nighthawk is warranted against internal defects in material or workmanship. All of our earphones are warranted for 12 months. Hygiene restrictions prevent us from extending our limited warranty to wearable parts such as Fin Ultra ear tips, earmolds, clear tubes & ear inserts. The warranty is extended to the original purchaser only and does not cover the following:

  • Physical abuse
  • Improper maintenance of unit
  • Damage from tugging or pulling
  • Frayed, torn, or exposed wires
  • Crushing or smashing in any way, shape, or form

General misuse of the item such as Excessive voltage, tampering with the unit, or repairs attempted by someone other than the manufacturer will void the MANUFACTURER’S LIMITED WARRANTY. The manufacturer reserves the right to evaluate & refuse a warranty based on their evaluation. In order to obtain warranty services, proof of purchase must be returned along with the product. For Returns Dept. & Return Authorization # Call Toll Free: 888-372-1888. After calling, send your return along with your name address & Return Authorization number to The Earphone Connection, Inc. 25139 Avenue Stanford Valencia, CA 91355

FOLLOW US
EarPhone -ICON

Visit our YouTube Channel: EPC Headsets for videos
about Pairing the Air Pro Wireless PH Combo Kit.
888.372.1888 www.earphoneconnect.com
25139 Avenue Stanford
Valencia, CA 91355

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

EarPhone Connection User Manuals

Related Manuals