googboy 64753 USB-C PD 3x Multiport Quick Charger Installation Guide

googboy 64753 USB-C PD 3x Multiport Quick Charger

Product Usage Instructions

Step 1: Safety Precautions

• The user manual is an important part of the product and contains essential information for correct use.
• Make sure to read and understand the user manual before using the product.

Step 2: Connections

• Plug the Euro plug (Type C, CEE 7/16) into a power outlet.
• The charger has a USB-A QC socket and two USB-CTM PD sockets for connecting your devices.

Step 3: Input

• The charger supports an input voltage of 100-240 V and a frequency of 50/60 Hz. Make sure the input does not exceed 2.0 A.

Step 4: Output

The charger has multiple output options depending on the connected devices:

• USB-CTM PD 1 / PD 2: The output voltage can be adjusted to 5.0 V, 9.0 V, 12.0 V, 15.0 V, or 20.0 V with a maximum current of 3.0 A to 3.25 A.
• USB-A QC: The output voltage can be adjusted to 4.5 V, 5.0 V, 9.0 V, 12.0 V, or 20.0 V with a maximum current of 5.0 A to 1.5 A.
• PD 1 + PD 2: The combined output power is 65.0 W max.
• PD 1 + QC: The combined output power is 63.0 W max.
• PD 2 + QC: The combined output power is 15.0 W max.
• (PD 2 + QC) + PD1: The combined output power is 60.0 W max.
• Total Output: The total output power is 65.0 W max.

Step 5: Maintenance, Care, Storage, and Transportation

• The product is maintenance-free. However, it is recommended to keep it clean and dry.
• Store the charger in a cool and dry place when not in use. When transporting the product, make sure to protect it from any physical damage.

Specifications

USB-C™ PD (Power Delivery) socket
Input| 100-240 V , 50/60 Hz, 2.0 A max.
Output

USB-C™ PD 1 / PD 2

| 5.0 V , 3.0 A, 15.0 W; 9.0 V , 3.0 A, 27.0 W; 12.0 V , 3.0 A, 36.0 W;

15.0 V , 3.0 A, 45.0 W; 20.0 V , 3.25 A, 65.0 max.

PPS: 3.3-20.0 V , 3.0 A, 60.0 W max.

Output USB-A QC| 4.5 V , 5.0 A, 22.5 W; 5.0 V , 4.5 A, 22.5 W; 9.0 V , 3.0 A, 27.0 W;

12.0 V , 2.5 A, 30.0 W; 20.0 V , 1.5 A, 30.0 W max.

Output PD 1 + PD 2| 45.0 W + 20.0 W (65.0 W max.)
Output PD 1 + QC| 45.0 W + 18.0 W (63.0 W max.)
Output PD 2 + QC| 5.0 V , 1.5 A, 7.5 W + 5.0 V , 1.5 A, 7.5 W (15.0 W max.)
Output (PD 2 + QC) + PD1| 15.0 W + 45.0 W (60.0 W max.)
Total output| 65.0 W max.
Average active efficiency| 87.5 %
Efficiency at

low load (10 %)

| 78.8 %
No-load power consumption| 0.13 W
Max. operating temperature| 25 °C
Protection level / Protection class| IP20 / II
Dimensions| 84.5 x 40.5 x 38.0 mm
Weight| approx. 126 g
Colour| black| white

Symbols used

For indoor use only| IEC 60417- 5957|
---|---|---
Alternating current| IEC 60417- 5032|
Direct current| IEC 60417- 5031|
Class II equipment| IEC 60417- 5172| ****

Safety instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully before use.
• The user manual must be available for uncertainties and passing the product.
• Keep this user manual.

Notes for network separation

The product has no power switch and may be used only in easily accessible outlets to quickly remove it in an emergency and after use.

Voltage-free only with pulled plug

• In case of emergency, during thunderstorms and after use, pull the product on its plug housing!
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.

A defective device may not be put into operation, but must be disconnected from mains and protected against further use.

• Use product, product parts and accessories only in perfect condition.
• Do not repair defective products yourself.
• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.
• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.

Hot surfaces

• The product can become very hot during use.
• Do not touch the surface for more than 10 seconds during and immediately after use.
• Do not cover the product.
• Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against accidental use.

Description and function

Product

• This product is a USB charger for charging and operating up to three devices simultaneously via two USB-C™ PD ports and one USB-A QC port.
• The product supports the USB PD (Power Delivery) standard and the USB QC (Quick Charge) standard.

Scope of delivery

• USB-C™ PD 3x Multiport Quick Charger (65 W), User Manual

Operating Elements

See Fig. 1.

1. Euro plug
2. USB-C™ PD1 socket
3. USB-C™ PD2 socket
4. USB-A QC socket

Intended use

This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use. We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

IP20: This product is protected against medium sized foreign objects, but not against water ingress.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.

Connection and operation

CAUTION:  Hot surfaces!

• The product can become very hot during use.
• Do not touch the surface for more than 10 seconds during and immediately after use.

See Fig. 2.

1. Connect up to three devices to the sockets of the charger using suitable USB charging cables.
2. Plug the charger into a power socket.
3. Disconnect all plug connections after use. USB charging cables are not included in the scope of delivery.

The output voltage is automatically regulated and adjusted to the respective connected devices.
The charger does not contain any controls to be operated during use.

Maintenance And Disposal

Maintenance, Care, Storage and Transportation

• The product is maintenance-free.

NOTICE:  Material damage

• Always unplug the product from the wall socket before cleaning.
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

Disposal Instructions

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed of apart from each other. Otherwisecontaminative and hazardous substances can damage the health and pollute the environment. As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection.

WEEE No: 82898622

Subject to change without notice.

Goobay® by Wentronic GmbH

• Pillmannstraße 12 | 38112 Braunschweig | Germany

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>