VOLLRATH R39733 Cafeteria Breath Guard Installation Guide
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH R39733 Cafeteria Breath Guard
Specifications
- Model: One Piece Cafeteria Breath Guard / Three Piece Cafeteria Breath Guard
- Item No.: 2350030-01 Rev 04/12
- Manufacturer: Vollrath Company, L.L.C.
- Website: www.vollrathco.com
- Address: 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.628.0830
- Service Tel: 800.628.0832
- FAX: 800.752.5620
- Vollrath of Canada, Co. Tel: 800.695.8560
- FAX: 800.752.5620
Product Usage Instructions
- One Piece Breath Guard Installation
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1.
- Repeat the installation for all four uprights.
- Three-Piece Breath Guard Installation
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2.
- Repeat the installation for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown.
- Repeat on the other side.
- Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown.
- Repeat for all four mounting locations.
- Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown.
- Repeat on the other side.
- Install the support bar and stud assembly (H) to the side breath guards (E).
- Repeat for all mounting locations.
- Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C).
- Repeat for all mounting locations.
FAQs
- Q: What should I do if I accidentally crack the plastic during installation?
- A: If you accidentally crack the plastic during installation, please contact Vollrath Customer Service for assistance on replacement parts or repair options.
- Q: Can I use tools other than those provided for installation?
- A: It is recommended to use the tools provided with the product to prevent damage or overtightening that may lead to cracking of the plastic components.
Installation Instructions
One Piece Cafeteria Breath Guard Three Piece Cafeteria Breath Guard
- These instructions cover the installation of the one-piece Cafeteria Breath Guard and the three-piece Cafeteria Breath Guard.
METHOD 1
One Piece Breath Guard Installation: Some units are shipped with a breath
guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause
the plastic to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
- Figure 1. One Piece Breath Guard Installation
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
- Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.
METHOD 2
Three Piece Breath Guard Installation: Some units are shipped with a
breath guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause
the plastic to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
- Figure 2. Three-Piece Breath Guard Installation
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
- Install the side shield (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.
- Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
- Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.
CONTACT
- The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.628.0830
- Service Tel: 800.628.0832
- FAX: 800.752.5620
- Vollrath of Canada, Co.
- Tel: 800.695.8560
- FAX: 800.752.5620
- © 2010 The Vollrath Company, L.L.C.
- www.vollrathco.com.
References
Read User Manual Online (PDF format)
Loading......