PROGRESS LIGHTING P710138-31M Tosca 1 Light 6 Inch Matte Black Wall Bracket Wall Light Instruction Manual
- August 12, 2024
- PROGRESS LIGHTING
Table of Contents
PROGRESS LIGHTING P710138-31M Tosca 1 Light 6 Inch Matte Black Wall
Bracket Wall Light
PACKAGE CONTENTS
HARDWARE CONTENTS
HARDWARE CONTENTS (not actual size)
Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
- CAUTION: Read instructions carefully and turn the electricity off at the main circuit breaker panel before beginning installation.
- CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure the correct branch circuit conductor.
- WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
- CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
Shut off the main power supply before cleaning the product or changing light bulbs. To clean, wipe with a damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
Assembly Instructions
- Attach the back plate (CC) to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.
- Strip 3/8″ of insulation from the electrical wire ends. Using a wire connector (BB), connect the WHITE fixture wire to the WHITE supply wire from the outlet box; connect the BLACK fixture wire to the BLACK supply wire from the outlet box.
- Connect the fixture ground wire and supply ground wire using a wire connector or by fastening it to the ground screw on the round mounting plate. Push all of the wire connections carefully into the outlet box.
- Attach the mounting holes in the fixture (A) to the back plate (CC) and using the Screw (AA), tighten the fixture against the mounting surface.
- Attach the glass shade (B)/socket cover (C) and socket ring (D) to the fixture socket (A) using the Socket collar tool (E) to secure it tightly. Thread the lamp (not included) into the fixture socket. Use a 60-watt MAX incandescent candelabra base lamp, SBCFL, or SBLED.
WARRANTY AND EXCLUSIVE REMEDY
Progress products, when properly installed and under normal conditions of use,
are warranted to our customers only to be free from defects in material and
workmanship at the time of shipment. All warranty claims must be asserted
within one year from the date of purchase of the subject items; thereafter,
warranty claims will not be honored. The customer’s sole
remedy for a warranty claim or otherwise shall be limited to repair or
replacement of the subject product if it is shown to have been defective in
material or workmanship at the time of shipment. Progress’s
sole and maximum liability for a defective product shall never exceed the cost
of the subject product.
EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO THE CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS.
Therefore, the customer’s sole and exclusive remedy against us for breach of the warranty, breach of contract negligence strict liability, or otherwise shall be limited to repair or replacement of the subject product at our option (excluding installation and removal charges which shall not be our liability) or, if we choose, refund of the purchase price. In no case does our warranty and exclusive remedy extend to anybody other than our customers? Our customers are not authorized to extend warranties or remedies on our behalf to anyone. Such unauthorized extensions of warranties or remedies by the customer shall remain the customer’s responsibility. The customer is responsible for determining the suitability of our products for the customer’s use or resale, or for incorporating them into objects or for applications that the customer designs, assembles, constructs, or manufactures.
THANK YOU for selecting Progress Lighting
We can assist you with questions regarding product information, assembly,
or missing parts.
-
800-447-0573
8 am-8 pm (Eastern), Monday-Friday
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>