TZONE TZ-BT04 Logging Recording Measuring Temperature Sensor User Manual

June 6, 2024
Tzone

TZ-BT04 User Manual
V1.9
TZONE TZ BT04 Logging Recording Measuring Temperature
Sensor

Product overview

TZ-BT04 is Bluetooth Low Energy temperature and humidity data logger with the latest Bluetooth 4.1 technology and Nordic NRF51822 chip. It can collect the temperature and humidity of the surrounding environment. Such data can be recorded as history data. BT04 can store up to 12000 pieces of the temperature and humidity data. Mobile phones with Bluetooth 4.0 or above can download and install App. It can store and monitor the temperature and humidity of the environment comprehensively. Its characteristics are small-sized, low- weighted, easily portable, and highly accurate for wide use in cold chain logistics, archives, labs, museums, etc.

Product application

  1. Refrigerated storage and transportation;
  2. Archives;
  3. Experimental (test) rooms;
  4. Workshop;
  5. Museums;
  6. Pharmaceutical environment;
  7. Fresh transport.

Product features

  1. High accuracy and stability;
  2. Bluetooth 4.1;
  3. Long-distance wireless transfer;
  4. Built-in highly sensitive temperature and humidity sensor;
  5. Real-time display temperature and humidity;
  6. It can store 12000 pieces of temperature and humidity data;
  7. You can set the alarm temperature range;
  8. Can be set the scope of temperature alarm;
  9. Can be set normal storage temperature and humidity data interval and alarm storage temperature and humidity data interval;
  10. Can choose time to query data, the stored data can be saved in history;
  11. History report can be sent to specified email;
  12. By pairing Bluetooth printer to print the data report;
  13. Can by OTA update version.

Product specification

Item Specification
Signal transmission frequency 2.400 – 2.4835GHz
Protocol standard Bluetooth 4.1
Modulation mode GFSK
Send interval 2S, adjustable
Built-in battery CR2450,620mAh /3V
Output power -4dBm, adjustable
Communication rate 1Mbps
Transmission distance 55 meters, adjustable
Storage Can save 12000 temperature and humidity data
battery life 1.5 years(Depends on the mode of operation, can replace battery)
Net weight 30g
Outline size 50mm50mm16mm
Operating temperature range -25℃~ +60℃
Operating Humidity range 0~85%RH
Temperature detection accuracy ±0.3℃(0~60℃),±0.3~0.7℃(other)
Humidity detection accuracy ±3%RH(20~80%),±4%(other)

Caution

  1. Being close to a metal object will interfere with the signal, causing the signal to be weakened.
  2. Note the distance between TZ-BT04 and the receiver to guarantee the accuracy of receiving.
  3. Keep away from water and corrosive objects.

APP

‘Temp Logger’ is a free mobile application which is provided by our company to the users, can connect the BT04 through the Bluetooth of the mobile devices and do the settings, data transmission, recording, synchronization, send to email. Apply the Bluetooth BLE way, so you can use an Android phone for temperature monitoring.
The client can download App by scanning the QR code below(V25 and above available):

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
QRhttp://www.tzonedigital.com/app_download/btlogger_en-us.html

6.1 Device Registration
6.1.1 Open the APP, enter the device ID directly to register on the homepage, or scan the QR code to get the device ID, or do not enter any ID and directly click search to find the device.

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
Registration

6.2.2 Enter the device connection page and click Connect. After a successful connection, the device ID will be displayed on the “Devices” page, indicating that the device has been registered successfully.

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
Registration2

6.2 Device View
Click the icon in the upper left corner of the home screen to expand the main menu.
You can select the menu function and click “device” to enter the multidevice interface.
The functions of the device interface are as follow:

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
Registration3

6.2.1 To view device information
The name, ID, MAC, temperature/humidity data, model, and status of all the current devices can be viewed, or you can view the specific device information by ID, name, and MAC.

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
information

Status description of the device in different symbols:
: Temperature normal
: Temperature alarm (including both high and low temperatures)
6.2.2 Delete the device:
Long press to delete the device:

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
information2

6.2.3 Device alarm:
When the device exceeds the preset upper or lower limit, the alarm information will be displayed, and the alarm bell will ring. Clicking “CLOSE ” to turn off the alarm information and alarm bell.

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
alarm

6.3 Device connection
Click a single device quickly to enter the connection interface. It will display the temperature/humidity, voltage, RSSI, alarm status, and logger status of the device.
Click “CONNECT,” and jump to update after the connection is successful, indicating that the device has been successfully connected and read the current data content. After the connection is successful, it will prompt you whether to view the report, or the access key and flight mode of the device will be displayed. Four buttons will be displayed at the bottom of the interface:

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
connection

Note: The device will not update the data in the connection process. By default, the device will be disconnected after 1 minute and the four buttons at the bottom will become gray and cannot be clicked again.
6.3.1 Device access key
Click “Access Key” to encrypt the device, and set the level-1 and level-2 access keys.
6.3.2 Detail and email function
Click “Detail” to view all information reports of the device. Click “EXPORT” to generate PDF and CSV reports, and send the reports to the designated mailbox by email.
A: Details summary

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
connection1TZONE TZ BT04 Logging Recording Measuring
Temperature Sensor - connection3

Note: The smartphone must have a mailbox APP and login account to send an email.
B: Chart:

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
Chart

C: List:

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
ist

6.4 Configure device
After connection, when the device does not start recording, you can click “Configure” to set the device.

6.4.1 Device name: The device name can be modified (up to 7byte) by users.
6.4.2 Basic settings:
A: Transmission power: The device transmission power(range:-30dbm~4dbm, default:-4dbm)
B: Logging interval: Record time of the stored data (range:10s~1h, default:1mins).
C: Logging cycle: It changes with the logging interval.
6.4.3 Advanced settings
A: Access key: Must be enabled, default: 000000.
6.4.4 Alarms:
A: Low temperature limit:-25℃
B: High temperature limit:100℃
6.4.5 Description: You can set a description for this device (up to 56 characters).
6.4.6 Start or stop
You can set whether the device starts or stops through the APP.
6.5 Data files
Click the “Data Files” menu bar to enter the data files interface. The functions of the device interface are as follows:

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
files

6.5.1 To View a single data file
The time displayed in this file is the time when the device data is read for the first time. The information will be updated after each reading until the machine stops recording.
6.5.2 Chart report comparison supporting up to 5 files
Check the data file and click “Comparison” to compare the temperature chart reports of different data files.
6.5.3 Delete data file
Check the data file and click “Delete” to delete the data file.
6.6 System setting
Click the “System setting” menu bar to enter the system setting interface. The functions of the system setting interface are as follows:

TZONE TZ BT04 Logging Recording Measuring Temperature Sensor -
System

7.6.1 Device Management:

  1. Configuration file: You can view the configuration file saved in “Configure”.

  2. Remember the device access key:
    Don’t turn on the switch: enter the access key every time you connect the device
    Turn on the switch: when connecting the device, you only need to input the access key once (default: remember the key)

  3. The firmware update:

Don’t turn on the switch: Firmware upgrades are not allowed
Turn on the switch: After connection, there is a firmware upgrade function(default)
7.6.2 Time &Time zone Setting(Only for generating reports through the APP):

  1. System default/Time Zone:
    Don’t turn on the switch: is UTC time zone or another time zone as you choose
    Turn on the switch: is the current time zone of the system (default: system default)

  2. Data Format: MM/DD/YY HH:MM: SS(default) or DD/MM/YY HH:MM: SS

7.6.3 Report settings(Only for generating reports through the APP):

  1. Include Tabular Data in PDF: Select include or exclude (default: include).
  2. Include Tabular Data in CSV: Select include or exclude (default: include).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals