ANKER A91F2 USB Power Strip User Guide
- June 1, 2024
- Anker
Table of Contents
ANKER A91F2 USB Power Strip
Specifications
- Product Number: A 91F2 51005004286 V01
- Compliance: Industry Canada license-ICES-003
- Interference Conditions: This device may not cause interference, and must accept any interference
Product Usage Instructions
Safety Instructions
- Always follow the safety instructions provided in the user manual to prevent any accidents or damages.
Warranty Information
- This device comes with a Connected Equipment Warranty. Refer to the warranty documentation for details.
Support and Information
- For tutorial videos, FAQs, manuals, and more information, visit the official Anker support website at https://support.anker.com.
- You can also scan the QR code provided in the manual for quick access to support resources.
Important Safety Instructions
- Do not connect this product to an ungrounded outlet.
- Do not use with extension cords.
- Use in dry locations and indoors only.
- Do not connect this product to other power strips.
- Keep children away from this product.
- The product is not intended to be repaired by service personnel in case of failure or component defect, waste products need to be disposed of by national environmental protection regulations.
- The surge protection feature can protect your computers, smartphones, and other electronic equipment against voltage fluctuations, surges, and spikes. If the surge protection light is off, it indicates that surge protection is not functioning normally.
- Warning: The temperature of the bottom surface of the product may be high when charging for a long time. Please do not touch the bottom surface for more than 1 second.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party:
- Company Name : Fantasia Trading LLC
- Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
- Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions:
- This device may not cause interference,
- This device must accept any interference, including interference that may cause undesired operation of the device.
Connected Equipment Warranty
Anker Innovations Limited (“Anker”) offers a limited Connected Equipment
Warranty (CEW) for Anker Power Strips and Outlet Extenders as listed below.
The product shall be purchased originally from Anker and free of defects in
design, assembly, material, or workmanship. Anker reserves the right to
update, amend, and/or revise the terms of this CEW.
For more details about the CEW, please refer to the official website:
https://us.anker.com/pages/connected-equipment-warranty
Or scan the QR code below:
For tutorial videos, FAQs, manuals, and more information, please visit:
https://support.anker.com
Or scan the QR code below:
USER GUIDE
- Product Number: A91F2
- 51005004286 V01
FAQ
- Q: Where can I find tutorial videos for this product?
- A: You can find tutorial videos on the official Anker support website or by scanning the QR code in the manual.
- Q: What is the warranty coverage for connected equipment?
- A: The device comes with a Connected Equipment Warranty. Refer to the warranty documentation for specific coverage details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>