ergodyne 1021 Chill Its Phase Change Vests Instructions
- June 1, 2024
- ergodyne
Table of Contents
ergodyne 1021 Chill Its Phase Change Vests
Product Specifications
- Cooling Pack: Hand wash with mild detergent and warm water
- Fabric Vest Carrier: Machine washable with mild soap, line-dry
- Manufacturer: Ergodyne
- Manufacturer Address: 1021 Bandana Boulevard East, Suite 220
- Saint Paul, MN, USA 55108
- Manufacturer Contact: +1.800.225.8238
Cooling Pack
- Hand wash the cooling pack with a mild detergent and warm water.
- Dry the pack with a paper towel or cloth. Do not machine wash or dry.
Fabric Vest Carrier
- Machine wash the fabric vest carrier with mild soap.
- Line dry the carrier. Do not machine wash or dry.
Manufacturer Information
Ergodyne is the manufacturer of this product. For any inquiries or support,
contact them at the provided address and phone number.
Authorized Representatives
- Authorized UK Representative: Authorised Rep Compliance Ltd., Arc House, Thurnham Lancaster, LA2 0DT, UK, Tel. +44 1524 805288
- Authorized EU Representative: Authorised Rep Compliance Ltd., Ground Floor, 71 Lower Baggot Street Dublin, D02 P593, Ireland, Tel. +353 151 33758
HOW TO USE YOUR ERGO DYNE CHILL-ITSPHASE CHANGE COOLING VEST AND PACKS
The Chill-Its® Phase Change Cooling Packs maintain a 64° F / 18° C
(6215/6230/6220/6260/6250) temperature for cooling the body. You can recharge
the cooling pack as follows: cooler of ice water – 10 minutes; freezer – 15
minutes; refrigerator – 25 minutes; near an air conditioner – 1 to 2 hours.
Place the recharged cooling pack in the vest pockets. The vest carriers
(models 6215/6215HV) are made of a modacrylic cotton blend fabric that
provides flame-resistant properties and meets the requirements of ASTMF1506;
classified to NFPA (CAT1). Hook and loop closures adjust at the shoulders and
around the body for a comfortable fit.
CARE: The cooling pack should be washed by hand with a mild detergent and
warm water. Dry with a paper towel or cloth. DO NOT machine wash or machine
dry. The fabric vest carrier is machine washable with mild soap; line dry.
WARNINGS: Chill-Its® Phase Change Cooling Vests are tough and resilient,
but they should never be used in place of protective gear. In the unlikely
event that a cooling pack leaks, do not ingest the liquid. In case of
accidental ingestion, contact a physician immediately. DO NOT induce vomiting.
If the liquid comes in contact with the eyes, flush your eyes with water for
15 minutes. In case of fire, extinguish with a dry chemical or foam. The
cooling pack plastic, if exposed to temperatures above 200°F / 93°C, may catch
on fire. The liquid in the cooling pack will boil at 286°F / 141°C. Dispose of
the cooling pack using a chemical incinerator equipped with an afterburner and
scrubber.
MANUFACTURER
Ergodyne 1021 Bandana Boulevard East, Suite 220
Saint Paul, MN, USA 55108 +1.800.225.8238
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>