ROPEFLEX RX2200 Wolf Compact Rope Trainer Instruction Manual

ROPEFLEX RX2200 Wolf Compact Rope Trainer

Product Information

Specifications:

• Model: RX2200
• Maximum User Weight: 300 pounds
• Assembly Required: Yes

Product Usage Instructions

Warning Decal Placement:
Ensure all warning decals are visible on the equipment. If any decals are missing or illegible, contact customer service for replacements.

Important Precautions:

1. Read the entire manual before assembling or using the equipment.
2. Ensure all users are aware of safety precautions.
3. Place and use the equipment on a level surface.
4. Avoid hanging on the ropes or frame, only pull the rope with your hands.
5. Regularly check and tighten all parts before each use.
6. Wear appropriate athletic shoes for foot protection during exercise.
7. Do not exceed the maximum user weight limit of 300 pounds.
8. If experiencing pain or dizziness during exercise, stop immediately and cool down.
9. Consult a physician before starting any exercise program, especially if over 35 or with pre-existing health conditions.
10. Keep children under 12 and pets away from the equipment at all times.

Product Assembly:

Step 1:
Attach the RX2200 Head Assembly to the RX2200 Seat Support Assembly using the RX2200 Frame Bracket and provided attachment hardware. Ensure all hardware is completely tightened using the washer and screw.

FAQ:

• Q: Where can I find the product serial number?
  A: The product serial number is located on the equipment or in the box below the SERIAL NUMBER. If it is not visible, check the equipment for the serial number.

• Q: What should I do if a warning decal is missing?
  A: Contact customer service at 650.549.5888 to order replacement decals. Apply replacement decals in the indicated locations as shown in the manual.

WARNING DECAL PLACEMENT

The decals shown here have been placed on the equipment in indicated locations. If any of the decals are missing or illegible, call us toll-free at 650.549.5888, Monday through Friday, 9 a.m. until 5 p.m. Pacific Time, to order replacement decals. Apply replacement decals in the locations shown.

IMPORTANT PRECAUTIONS

WARNING:
To reduce the risk of serious injury, read the following important precautions before using this equipment.

1. Read all instructions in this manual and assemble as described before using this equipment.
2. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all precautions.
3. Use this equipment only on a level surface. Cover the floor beneath to protect the surface.
4. Keep children under 12 and pets away from the equipment at all times.
5. Make sure all parts are properly tightened each time you use this machine. Replace any worn parts immediately.
6. Make sure the adjustment knobs are fully engaged/disengaged before using the equipment.
7. Always wear athletic shoes for foot protection while exercising.
8. This equipment is designed to support a maximum user weight of 300 pounds.
9. Pull on one rope only and never grab a rope in a way that prevents the drum from rotating. Never attempt to hang on the rope or frame. Pull the rope with hands only.
10. If you feel pain or dizziness at any time while exercising, stop immediately and begin cooling down.

WARNING:
Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre- existing health problems. Read all instructions before using. ROPEFLEX assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

Box Contents/Parts List

Tools Required

3/16 or 1/4 Hex Key for 5/16” Button Head Screws

Assembly Instruction

STEP 1

Parts:

• RX2200 Head Assembly
• RX2200 Seat Support Assembly
• RX2200 Frame Bracket
• RX2200 Seat

Hardware:

• Button Head Screw 5/16” x 1”
• Washer 5/16”

Tools:

• 3/16 Hex Key for 5/16” Button Head Screws

1. Attach RX2200 Head Assembly to RX2200 Seat Support Assembly using RX2200 Frame Bracket and attachment hardware. Completely tighten the hardware (use washer & screw).
2. Attach RX2200 Seat to assembly in steps 1-1. Install and completely tighten the hardware (use a washer & screw).

Equipment Maintenance

WARNING:
Routine inspection and maintenance are of critical importance to ensure maximum safety and performance. We use the highest quality materials available, but wear is inevitable. Be advised that dangerous conditions can arise even during a warranty period. A warranty does not negate the owner’s responsibility to thoroughly, carefully and daily inspect the machine. Consult your physician before starting your exercise program. For your safety, do not begin any exercise program without proper instruction.

1. Check Rope
   While the machine is not in use carefully inspect the rope for damage and tears. Carefully inspect the connection of rope ends and make sure that stitching (threads) is not torn or damaged. Do not use equipment until the damaged rope has been replaced.

2. Upholstery

3. Wipe down after every workout.

4. Periodically take the time to use a mild soap or mild vinyl upholstery cleaner. Avoid using any abrasive cleaner not intended for use on vinyl.

5. Keep sharp or pointed objects out of your pockets and clear of all upholstery.

6. Nuts/Bolts/Fasteners

7. Periodically inspect all nuts and bolts. Tighten if needed. If bolts seem to loosen periodically, use Loctite 242 for a long-term cure.

8. Go through a re-tightening sequence periodically to ensure that all hardware is properly tensioned.

9. Adjustments / Locking Pins / Tightening Knobs

10. Check all pieces for signs of visible wear or damage.

11. Check springs in Snap Links and Pop Pins for proper tension and alignment.

12. If the spring sticks or has lost its rigidity, replace it immediately.

13. Anti-Skid Surfaces
    Replace them if they appear worn or become slippery.

14. Warning Instruction Labels Inspect and familiarize yourself with all safety warnings and other user information on decals. Replace decals if damaged, illegible, or removed.

WARRANTY

We strive to offer the simplest and fastest resolution to all product-related concerns. Our warranty service program gives its customers the option to return the product for repair, exchange or refund if the product is determined to be defective.

• All products are warranted to the original purchaser.
• Warranties apply and cover all defects in material and workmanship.
  • Frame (excluding coating): Lifetime
  • Rope, Sheaves, Bearings and Labor: One-Year
• The customer is responsible for the cost of shipment to ROPEFLEX. Company “ship to” address for product returns and service will be provided once the RMA has been issued. It will be at ROPEFLEX’s discretion to determine the party responsible for the cost of shipment back to the customer.
• Out-of-warranty products are repaired only with the customer’s prior approval.
• 15-Day 100% Satisfaction Guarantee includes a full refund of the purchase price, less shipping, handling and restocking fees equaling 15% of the price during purchase. Email for more details. If you decide to return a ROPEFLEX product, simply email us within 15 days to ask for a return authorization number (RMA). Items must be returned in original condition and packaging and postmarked no later than 2 weeks after the date of return authorization.

PLEASE REGISTER YOUR NEW PRODUCT
To register your product online please go to: www.ropeflex.com/warranty-and- registration.

The product serial number is located on the equipment or is shown in the box below

SERIAL NUMBER
If the serial number is not shown please check the equipment

If you have any questions regarding ROPEFLEX equipment or any instructions found in this document, please call 650.549.5888 for assistance.

References

• Warranty and Registration | ROPEFLEX - Strength & Conditioning Equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>