ROPEFLEX RX8200 Endless Rope Training Rig Instruction Manual

ROPEFLEX RX8200 Endless Rope Training Rig Instruction Manual

DECAL PLACEMENT (IF APPLICABLE)

The decals shown here have been placed on the equipment in indicated locations. If any of the decals are missing or illegible, call us tollfree at 650.549.5888, Monday through Friday, 9 a.m. until 5 p.m. Pacific Time, to order replacement decals. Apply replacement decals in the locations show

WARNING

• Misuse of this product may result in serious injury.
• Read user’s manual and follow all warnings.
• Do not allow children on or around machine.
• Obtain a medical exam before beginning an exercise program.
• Inspect the machine before use.
• Alert to refrain from use if the machine appears damaged or inoperable.
• Replace label if damaged, illegible, or removed.

CAUTION
PINCH POINTS
KEEP HANDS CLEAR NO LOOSE CLOTHING OR LONG HAIR NEAR ROTATING DRUM

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using this equipment.

1. Read all instructions in this manual and assemble as described before using this  equipment.
2. It is the responsibility of the owner to ensure that all users of this equipment are  adequately informed of all precautions.
3. Use this equipment only on a level surface. Cover the floor beneath to protect the surface.
4. Keep children under 12 and pets away from the equipment at all times.
5. Make sure all parts are properly tightened each time you use this machine. Replace any worn parts immediately.
6. Make sure the adjustment knobs are fully engaged / disengaged before using the equipment.
7. Always wear athletic shoes for foot protection while exercising.
8. This equipment is designed to support a maximum user weight of 300 pounds.
9. Pull on one the rope only and never grab a rope in a way that prevents the drum from rotating. Never attempt to hang on the rope or frame. Pull rope with hands only.
10. If you feel pain or dizziness at any time while exercising, stop immediately and begin cooling down.

WARNING : Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ROPEFLEX assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

REQUIRED TOOLS

• RATCHET WRENCH 3/8”

• DEEP SOCKET ¾”

• WRENCH ¾
  

• HEX KEY 3/16”
  HEX KEY 7/32”
  HEX KEY 5/16”
  HEX KEY 3/8”

INSTALLATION

STEP 1
Assemble as shown in diagram and repeat steps as required. DO NOT FULLY TIGHTEN HARDWARE TO ALLOW FOR ADJUSTMENT

THICK WASHER ½”
NOTE: ALWAYS USE THICK WASHERS DIRECTLY TOUCHING THINNER METAL WALLS. THIS WILL REDUCE DEFORMATION IN CASE OF OVER TIGHTENING

WARNING: DURING ASSEMBLY BE CAREFUL NOT TO DAMAGE SENSOR CABLES. SENSOR CABLES WILL NEED TO BE PULLED THROUGH TUBING TO READ ENDLESS ROPE DRUM. DO NOT FORCE PULL CABLES TO AVOID DAMAGE.

STEP 2
Assemble as shown in diagram and repeat steps as required. DO NOT FULLY TIGHTEN HARDWARE TO ALLOW FOR ADJUSTMENT

STEP 3
Assemble as shown in diagram and repeat steps as required. DO NOT FULLY TIGHTEN HARDWARE TO ALLOW FOR ADJUSTMENT

WARNING: DURING ASSEMBLY BE CAREFUL NOT TO DAMAGE SENSOR CABLES. SENSOR CABLES WILL NEED TO BE PULLED THROUGH TUBING TO READ ENDLESS ROPE DRUM. DO NOT FORCE PULL CABLES TO AVOID DAMAGE.

SUPERVISION
BATTERY PORT (ELECTRONIC MODULE LOCATED INSIDE)

STEP 4
Assemble as shown in diagram and repeat steps as required. FULLY TIGHTEN HARDWARE AFTER FINAL ADJUSTMENTS

STEP 5
Assemble as shown in diagram and repeat steps as required. CONNECT ALL SENSOR CABLES, AND VERIFY CONNECTION

STEP 6
Assemble as shown in diagram and repeat steps as required. FULLY BAR HOOKS FASTENERS

STEP 7
Assemble as shown in diagram and repeat steps as required. FULLY TIGHTEN PULLEY RAIL FASTENERS

STEP 8
Assemble as shown in diagram and repeat steps as required. PLUG ALL OPEN THREADED HOLES WITH SCREWS & FULLY TIGHTEN ALL FASTENERS

EQUIPMENT MAINTENANCE

WARNING: Routine inspection and maintenance is of critical importance to ensure maximum safety and performance. We use the highest quality materials available, but wear is inevitable. Be advised that dangerous conditions can arise even during warranty period. A warranty does not negate the owner’s responsibility to thoroughly, carefully and daily inspect the machine. Consult your physician before starting your exercise program. For your own safety, do not begin any exercise program without proper instruction.

1. Check Rope
   While the machine is not in use carefully inspect the rope for damage and tears. Carefully inspect connection of rope ends and make sure that stitching (threads) are not torn or damaged. Do not use equipment until damaged rope has been replaced.

2. Upholstery
   Wipe down after every workout. Periodically take the time to use a mild soap or mild vinyl upholstery cleaner. Avoid using any abrasive cleaner not intended for use on vinyl. Keep sharp or pointed objects out of your pockets and clear of all upholstery.

3. Nuts/Bolts/Fasteners
   Periodically inspect all nuts and bolts. Tighten if needed. If bolts seem to loosen periodically, use Locate 242 for a long-term cure. Go through a re- tightening sequence periodically to ensure that all hardware is properly pensioned.

4. Adjustments / Locking Pins / Tightening Knobs
   Check all pieces for signs of visible wear or damage.
   Check springs in Snap Links and Pop Pins for proper tension and alignment.
   If the spring sticks or has lost its rigidity, replace it immediately.

5. Anti-Skid Surfaces
   Replace if they appear worn or become slippery.

6. Warning Instruction Labels
   Inspect and familiarize yourself with all safety warnings and other user information on decals. Replace decals if damaged, illegible, or removed.

WARRANTY

We strive to offer the simplest and fastest resolution to all product related concerns. Our warranty service program gives its customers the option to return the product for repair, exchange or refund if the product is determined to be defective.

• All products are warranted to the original purchaser
  • Warranties apply and cover all defects in material and workmanship.
  • Frame (excluding coating): Lifetime
  • Rope, Sheaves, Bearings and Labor: One-Year
• Customer is responsible for the cost of shipment to ROPE FLEX. Company “ship to” address for product returns and service will be provided once the RMA has been issued. It will be at Rope Flex’s discretion to determine the party responsible for cost of shipment back to customer.
• Out-of-Warranty Products are repaired only with the customer’s prior approval.
• ON SELECT ITEMS ONLY a 15 Day 100% Satisfaction Guarantee includes full refund of purchase price, less shipping, handling and restocking fee equaling 15% of price during purchase. Email for more details. If you decide to return a ROPEFLEX product, simply email us within 15 days to ask for a return authorization number (RMA). Items must be returned in original condition and packaging and postmarked no later than 2 weeks after the date of return authorization.

If you have any questions regarding ROPE FLEX equipment or any instructions found in this document, please call 650.549.5888 for assistance.

References

• Warranty and Registration | ROPEFLEX Fitness Equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>