ROPEFLEX RX3200-M Rowing Rope Trainer Instruction Manual

PLEASE REGISTER YOUR NEW PRODUCT

To register your product online please go to:

www.ropeflex.com/warranty-and-registration

Product serial number is located on equipment or is shown in the box below

SERIAL NUMBER
If serial number is not sown please check equipment

ORYX – RX3200

Assembly Instructions & Manual

DOC: 32-1020

Configuration subject to change

ADDAX ASSEMBLY INSTRUCTIONS & MANUAL

RX3200-M REV.C

WARNING DECAL PLACEMENT

The decals shown here have been placed on the equipment in indicated locations. If any of the decals are missing or illegible, call us toll-free at 650.549.5888, Monday through Friday, 9 a.m. until 5 p.m. Pacific Time, to order replacement decals. Apply replacement decals in the locations shown.

1. ---

   • Misuse of this product may result in serious injury.

   • Read user’s manual and follow all warnings.

   • Do not allow children on or around machine.

   • Obtain a medical exam before beginning an exercise program.

   • Inspect the machine before use.
     Alert to refrain from use if the machine appears damaged or inoperable. 

   • Replace label if damaged. illegible, or removed.

2. ---

   PINCH POINTS
   KEEP HANDS CLEAR
   NO LOOSE CLOTHING
   OR LONG HAIR NEAR
   ROTATING DRUM

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using this equipment.

1. Read all instructions in this manual and assemble as described before using this equipment.
2. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all precautions. 
3. Use this equipment only on a level surface. Cover the floor beneath to protect the surface.
4. Keep children under 12 and pets away from the equipment at all times. 
5. Make sure all parts are properly tightened each time you use this machine. Replace any worn parts immediately. 
6. Make sure the adjustment knobs are fully engaged / disengaged before using the equipment. 
7. Always wear athletic shoes for foot protection while exercising. 
8. This equipment is designed to support a maximum user weight of 300 pounds.
9. Pull on one the rope only and never grab a rope in a way that prevents the drum from rotating. Never attempt to hang on the rope. Pull rope with hands only. 
10. If you feel pain or dizziness at any time while exercising, stop immediately and begin cooling down.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ROPEFLEX assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

Package Contents / Parts List

RX3200 DRUM BASE WITH ROPE

ITEM

|

QUANTITY

| DESCRIPTION
---|---|---

1

|

1

| RX3200 Drum Base with Rope

2

|

6

| Washer 5/16”

3

|

6

| Button Head Screw 5/16” x 1

Qty.6                                                 Qty.6
Button Head Screw 5/16″ x 1”             Washer 5/16″

RX3200 SLIDE SEAT ASSEMBLY

ITEM

|

QUANTITY

| DESCRIPTION
---|---|---

1

|

1

| RX3200 Slide Seat Assembly

Tools Required for Assembly

3/16 Hex Key for 5/16″ Button Head Screws

Product Assembly

STEP 1

Parts:

• RX3200 Drum Base w/ Rope
• RX3200 Slide Seat Assembly

Hardware:

• Button Head Screw 5/16” x 1”
  Washer 5/16”

Tools:

• 3/16 Hex Key for 5/16” Button Head Screws

1-1 Attach RX3200 Drum Base to Slide Seat Assembly as shown.

1-2 Install and completely tighten the hardware (use screw & washer).

1. RX3200 Drum Base w/ Rope
2. RX3200 Slide Seat Assembly
3. Hardware (screw & washers)
   Qty.6

Slide Seat Adjustment

2-1 Pull locking pin out, adjust seat to desired location and push pin into mating hole.

2-2 For continuous slide seat configuration pull locking pin out, and turn it ¼ turn in either direction.

Note: Avoid hard impact of sliding seat with seat stopper

1. Sliding / Stationary Seat
2. Lock Pin
3. Seat Stopper

Equipment Maintenance

WARNING: Routine inspection and maintenance is of critical importance to ensure maximum safety and performance. We use the highest quality materials available, but wear is inevitable. Be advised that dangerous conditions can arise even during a warranty period. A warranty does not negate the owner’s responsibility to thoroughly, carefully and daily inspect the machine. Consult your physician before starting your exercise program. For your own safety, do not begin any exercise program without proper instruction.

1. Check Rope
   While the machine is not in use carefully inspect the rope for damage and tears.
   Carefully inspect connection of rope ends and make sure that stitching (threads) are not torn or damaged. Do not use equipment until damaged rope has been replaced.

2. Upholstery
   Wipe down after every workout.
   Periodically take the time to use a mild soap or mild vinyl upholstery cleaner. Avoid using any abrasive cleaner not intended for use on vinyl.
   Keep sharp or pointed objects out of your pockets and clear of all upholstery.

3. Nuts/Bolts/Fasteners
   Periodically inspect all nuts and bolts. Tighten if needed. If bolts seem to loosen periodically, use Loctite 242 for a long-term cure.
   Go through a re-tightening sequence periodically to ensure that all hardware is properly tensioned.

4. Adjustments / Locking Pins / Tightening Knobs
   Check all pieces for signs of visible wear or damage.
   Check springs in Snap Links and Pop Pins for proper tension and alignment.
   If the spring sticks or has lost its rigidity, replace it immediately.

5. Anti-Skid Surfaces
   Replace if they appear worn or become slippery.

6. Lubrication
   Periodic lubrication of seat slides and bearings is required. Use WD-40 or engine oil with cloth to wipe all slide and bearing surfaces.

7. Warning Instruction Labels
   Inspect and familiarize yourself with all safety warnings and other user information on decals. Replace decals if damaged, illegible, or removed.

WARRANTY

We strive to offer the simplest and fastest resolution to all product related concerns. Our warranty service program gives its customers the option to return the product for repair, exchange or refund if the product is determined to be defective.

• All products are warranted to the original purchaser and must be registered to receive coverage.
• Warranties apply and cover all defects in material and workmanship.

WARRANTY

Frame (not coatings)| 10 years
Structural parts| 10 years
Pulleys| 5 years
Bearings| 5 years
Labor| 1 year
Electronics| 1 year
Rope / Upholstery| 6 months
Accessories| 6 months

• Customer is responsible for the cost of shipment to ROPEFLEX. Company “ship to” address for product returns and service will be provided once the RMA has been issued. It will be at ROPEFLEX’s discretion to determine the party responsible for cost of shipment back to customer.
• Out-of-Warranty Products are repaired only with the customer’s prior approval. If you have any questions regarding ROPEFLEX equipment or any instruction found in this document, please call 650.549.5888 for assistance.

If you have any questions regarding ROPEFLEX equipment or any instruction found in this document, please call 650.549.5888 for assistance.

References

• Warranty and Registration | ROPEFLEX Fitness Equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>