ROPEFLEX RX2100 Rack Mount Rope Trainer Instruction Manual

ROPEFLEX RX2100 Rack Mount Rope Trainer

Specifications:

• Product: OX2 & OX2O
• Maximum User Weight: 300 pounds

Product Usage Instructions

Assembly Instructions

1. Make sure you have all the parts listed in the Box Contents / Parts List section.
2. Use the provided tools, 3/4 Hex Socket Ratchet Wrench and 3/4 Hex Open Wrench, for assembly.
3. Follow the steps outlined in the Product Installation section for proper installation.

Important Precautions

1. Read all instructions in the manual before using the equipment.
2. Ensure all users are informed of safety precautions.
3. Use the equipment only on a level surface.
4. Keep children and pets away from the equipment during use.
5. Check and tighten all parts before each use.
6. Always wear athletic shoes for foot protection while exercising.

Product Usage Guidelines

1. Pull on one rope at a time; do not prevent the drum from rotating.

2. Do not hang on the rope or frame.

3. Stop exercising immediately if you feel any pain or dizziness.

FAQ

• Q: Where can I find the serial number of the product?
  • A: The serial number is located on the equipment or on the box near the SERIAL NUMBER.
• Q: What should I do if any warning decals are missing or illegible?
  • A: Contact customer service at 650.549.5888 to order replacement decals and apply them in the indicated locations.

PLEASE REGISTER YOUR NEW PRODUCT

To register your product online please go to: www.ropeflex.com/warranty-and- registration Product serial number is located on the equipment or is shown in the box below

WARNING DECAL PLACEMENT

The decals shown here have been placed on the equipment in indicated locations. If any of the decals are missing or illegible, call us toll-free at 650.549.5888, Monday through Friday, 9 a.m. until 5 p.m. Pacific Time, to order replacement decals. Apply replacement decals in the locations shown

WARNING

• Misuse of this product may result in serious injury.
• Read user’s manual and follow all warnings.
• Do not allow children on or around machine.
• Obtain a medical exam before beginning an exercise program.
• Inspect the machine before use. Alert to refrain from use if the machine appears damaged or inoperable.
• Replace label if damaged, illegible, or removed.

CAUTION

PINCH POINTS KEEP HANDS CLEAR NO LOOSE CLOTHING OR LONG HAIR NEAR ROTATING DRUM

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using this equipment. 1. Read all instructions in this manual and assemble as described before using this equipment. 2. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all precautions. 3. Use this equipment only on a level surface. Cover the floor beneath to protect the surface. 4. Keep children under 12 and pets away from the equipment at all times. 5. Make sure all parts are properly tightened each time you use this machine. Replace any worn parts immediately. 6. Make sure the adjustment knobs are fully engaged / disengaged before using the equipment. 7. Always wear athletic shoes for foot protection while exercising. 8. This equipment is designed to support a maximum user weight of 300 pounds. 9. Pull on one the rope only and never grab a rope in a way that prevents the drum from rotating. Never attempt to hang on the rope or frame. Pull rope with hands only. 10. If you feel pain or dizziness at any time while exercising, stop immediately and begin cooling down. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre- existing health problems. Read all instructions before using. ROPEFLEX assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

Box Contents / Parts List

MAIN DRUM ASSEMBLY

Tools Required for Assembly

Product Installation

STEP 1

• 1-1 With 2 bolts installed as shown adjust the distance between bracket plates as close to the beam width as possible while allowing the unit to be mounted.
• 1-2 If necessary use additional ½” steel washers (not provided) to insure that once the bold is tightened it does not touch the rope or drum.
• 1-3 Tighten all hardware.

Note: Do not attempt assembly alone. 2 person installation required. Never hang on the unit or the rope. This will void the warranty and may result in injury or death.

Bracket installation hole pattern **

**

Sample Configuration 1: Indoor

Sample Configuration 2: Outdoor

Equipment Maintenance

WARNING: Routine inspection and maintenance is of critical importance to ensure maximum safety and performance. We use the highest quality materials available, but wear is inevitable. Be advised that dangerous conditions can arise even during a warranty period. A warranty does not negate the owner’s responsibility to thoroughly, carefully and daily inspect the machine. Consult your physician before starting your exercise program. For your own safety, do not begin any exercise program without proper instruction.

1. Check Rope
   While the machine is not in use carefully inspect the rope for damage and tears. Carefully inspect the connection of rope ends and make sure that stitching (threads) are not torn or damaged. Do not use equipment until damaged rope has been replaced.

2. Upholstery
   Wipe down after every workout. Periodically take the time to use a mild soap or mild vinyl upholstery cleaner. Avoid using any abrasive cleaner not intended for use on vinyl. Keep sharp or pointed objects out of your pockets and clear of all upholstery.

3. Nuts/Bolts/Fasteners
   Periodically inspect all nuts and bolts. Tighten if needed. If bolts seem to loosen periodically, use Loctite 242 for a long-term cure. Go through a re- tightening sequence periodically to ensure that all hardware is properly tensioned.

4. Adjustments / Locking Pins / Tightening Knobs
   Check all pieces for signs of visible wear or damage. Check springs in Snap Links and Pop Pins for proper tension and alignment. If the spring sticks or has lost its rigidity, replace it immediately.

5. Anti-Skid Surfaces
   Replace if they appear worn or become slippery.

Warning Instruction Labels Inspect and familiarize yourself with all safety warnings and other user information on decals. Replace decals if damaged, illegible, or removed

WARRANTY

We strive to offer the simplest and fastest resolution to all product-related concerns. Our warranty service program gives its customers the option to return the product for repair, exchange or refund if the product is determined to be defective.

• All products are warranted to the original purchaser.

• Warranties apply and cover all defects in material and workmanship.
  Frame (excluding coating): Lifetime Rope, Sheaves, Bearings and Labor: One- Year

• The customer is responsible for the cost of shipment to ROPEFLEX. Company “ship to” address for product returns and service will be provided once the RMA has been issued. It will be at ROPEFLEX’s discretion to determine the party responsible for cost of shipment back to the customer.

• Out-of-warranty products are repaired only with the customer’s prior approval.

• 15-Day 100% Satisfaction Guarantee includes a full refund of the purchase price, less shipping, handling and restocking fee equaling 15% of price during purchase. Email for more details. If you decide to return a ROPEFLEX product, simply email us within 15 days to ask for a return authorization number (RMA). Items must be returned in original condition and packaging and postmarked no later than 2 weeks after the date of return authorization.

If you have any questions regarding ROPEFLEX equipment or any instructions found in this document, please call 650.549.5888 for assistance.

References

• Warranty and Registration | ROPEFLEX Fitness Equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>