CORSTON Medium Wall Light Instruction Manual
- June 1, 2024
- CORSTON
Table of Contents
Medium Wall
Light Instructions
Medium Wall Light
These products must be installed in dry conditions by a qualified electrician. Turn off electrical supply to circuit before installation.
Location | Interior/Exterior |
---|---|
Class | Class 1 |
IP Rating | IP44 |
Bathroom Zone | Zone 2 |
Driver Required | No |
Fire Rating | No |
Cable Length | 200mm |
Light Source | No |
Max Wattage | Bulb Dependant |
Lamp Included | G9 |
Switched | 6W |
Dimmable | No |
Rated Voltage | 220-240V |
Rated Frequency | 50 /60Hz |
- Install wall light mount
- Push wires through grommet
- Connect WAGOs inside base
- Tighten grub screws
- Unscrew glass cover to add bulb
- Screw Claremont shade onto body
- Use shade ring to secure shade
- Use grub screw to adjust shade height
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>