CORSTON 14623 Ealing Ground Spotlight Owner’s Manual
- June 1, 2024
- CORSTON
Table of Contents
14623 Ealing Ground Spotlight
Owner’s Manual
Eagling Ground Spotlight Instructions
14623 Ealing Ground Spotlight
These products must be installed in dry conditions by a qualified electrician. Turn off electrical supply to circuit before installation.
| Location | Exterior |
|---|---|
| Class | Class 1 |
| IP Rating | IP56 |
| Driver Required | No |
| Fire Rating | No |
| Cable Length | 3000mm |
| Light Source | GU10 |
| Max Wattage | Bulb Dependant |
| Lamp Included | 6W |
| Switched | No |
| Dimmable | No |
| Rated Voltage | 220-240V |
| Rated Frequency | 50 /60Hz |
Included:
1. Align spotlight direction with spike| 2. Remove light and hammer spike
into position
---|---
|
3. Cover base with brass cover| 4. Feed cable into position
| 
5. Place light and tighten collar| 6. Install bulb
| 
7. Install glass cover using suction tool
Eagling Path Spotlight Instructions
These products must be installed in dry conditions by a qualified electrician. Turn off electrical supply to circuit before installation.
| Location | Exterior |
|---|---|
| Class | Class 1 |
| IP Rating | IP56 |
| Driver Required | No |
| Fire Rating | No |
| Cable Length | 3000mm |
| Light Source | GU10 |
| Max Wattage | Bulb Dependant |
| Lamp Included | 6W |
| Switched | No |
| Dimmable | No |
| Rated Voltage | 220-240V |
| Rated Frequency | 50 /60Hz |
Included:
- Align spotlight direction with spike
- Remove light and hammer spike into position
- Cover base with brass cover
- Feed cable into position
- Place light and tighten collar
- Install bulb
- Install glass cover using suction tool
Ealing Ground Spotlight Instructions
These products must be installed in dry conditions by a qualified electrician.
Turn off electrical supply to circuit before installation.
| Location | Exterior |
|---|---|
| Class | Class 1 |
| IP Rating | IP56 |
| Driver Required | No |
| Fire Rating | No |
| Cable Length | 3000mm |
| Light Source | GU10 |
| Max Wattage | Bulb Dependant |
| Lamp Included | 6W |
| Switched | No |
| Dimmable | No |
| Rated Voltage | 220-240V |
| Rated Frequency | 50 /60Hz |
Included:
- Drill holes, set anchors and screw base to wall
- Feed cable and sit base with brass
- Place light and tighten collar
- Install bulb
- Install glass cover using suction tool
Ealing Ground Spotlight Instructions
These products must be installed in dry conditions by a qualified electrician.
Turn off electrical supply to circuit before installation.
| Location | Exterior |
|---|---|
| Class | Class 1 |
| IP Rating | IP56 |
| Driver Required | No |
| Fire Rating | No |
| Cable Length | 3000mm |
| Light Source | GU10 |
| Max Wattage | Bulb Dependant |
| Lamp Included | 6W |
| Switched | No |
| Dimmable | No |
| Rated Voltage | 220-240V |
| Rated Frequency | 50 /60Hz |
Included:
- Drill holes, set anchors and screw base to wall
- Feed cable through grommet
- Make connections using Wages
- Attach base with grub screws
- Install bulb
- Install glass cover using suction tool
Waterproof Connector Instructions
These products must be installed in dry conditions by a qualified electrician. Turn off electrical supply to circuit before installation.
| Location | Exterior |
|---|---|
| IP Rating | IP56 |
| Fire Rating | No |
Included:
- Connect wires using waterproof terminal
- Screw on clamps
- Hide connection
- Swap grommets when using armored cable
Waterproof Connector Instructions
These products must be installed in dry conditions by a qualified electrician.
Turn off electrical supply to circuit before installation.
| Location | Exterior |
|---|---|
| IP Rating | IP56 |
| Fire Rating | No |
Included:
- Connect wires using waterproof terminal
- Screw on clamps
- Hide connection
- Swap grommets when using armored cable
corston.com/support
hi@corston.com
01249 549332
Documents / Resources
|
CORSTON 14623 Ealing Ground
Spotlight
[pdf] Owner's Manual
14623 Ealing Ground Spotlight, 14623, Ealing Ground Spotlight, Ground
Spotlight, Spotlight
---|---