CORSTON 50mm Cutting Template Paintable Spotlight Instructions
- June 1, 2024
- CORSTON
Table of Contents
CORSTON 50mm Cutting Template Paintable Spotlight
Product Information
Specifications:
- Product: Paintable Spotlight
- Power Supply: Requires connection to electrical supply
- Compatibility: GU10 bulb
Product Usage Instructions
Preparation:
Before starting the installation process, ensure that the power supply is
isolated at the consumer unit circuit breaker and verify that the power is
off. Remember that electrical items must be installed by a qualified
electrician to ensure safety.
Painting the Spotlight:
Using any interior paint, cover the spotlight surface. Some emulsions may
require two coats for complete coverage.
Drilling Hole in Ceiling:
Using the cutting template provided on page two, mark and drill a 50mm hole
in the ceiling at the desired installation location for the spotlight.
Making Connections:
Connect the wires from the power supply to the light fitting in the
terminal box provided with the spotlight.
Installing the Spotlight:
Fold the clips on the spotlight up and carefully push the connected light
into the ceiling cavity. Release the clips once the light is securely in
place.
Fitting the Bulb:
Insert and fit the GU10 bulb into the spotlight fixture.
FAQ:
- Q: What should I do if I encounter difficulties during installation?
A: If you face any challenges or uncertainties during the installation process, please contact our support team at corston.com/support or email us at hi@corston.com. You can also reach us by phone at 01249 549332 for further assistance.
INSTALLATION INSTRUCTION
Isolate the power supply at the consumer unit circuit breaker. Verify that the
power is off.
These products must be installed in accordance with the latest building
regulations.
Electrical items must be installed by a qualified electrician.
- Paint the spotlight with any interior paint. Some emulsions may require two coats.
- Using the template on page two if needed, drill a 50mm hole in ceiling.
- Make the connections from the supply to the light fitting in the terminal box provided.
- Fold clips up and push the connected light into the ceiling cavity.
- Release the clips, then the light is secure.
- Fit the GU10 bulb.
corston.com/support
hi@corston.com
01249 549332
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>