CORSTON 18037 Concealed Fixing Hook Instruction Manual
- June 9, 2024
- CORSTON
Table of Contents
CORSTON 18037 Concealed Fixing Hook
Contents
Fitting
Concealed fixing hooks are installed onto a wall bracket. Plast ic wall fixings are supplied to attach the wall bracket, which are suitable for solid brick or concrete walls. If you have another type of wall, use specialist fixings.
Care Instructions
- Use mild detergent and a damp cloth to maintain the handles, avoiding chemical cleaners. Touching the hardware with another metal or hard object is likely to scratch and/or damage it.
- All finishes will age and develop over time. If brass cleaner is used, it will remove the protective lacquer. Only do this if an aged brass patina is desired.
Concealed Fixing Hook Installation Instructions
Drill a hole & attach fittings
- Mark and drill an 8mm hole, attach the bracket to the wall using the correct wall fixings.
Fit the hook onto the bracket
- When fitting the hook on to the bracket make sure the top edge of the bracket connects with the ridge of the hook.
Tighten the grub screw
- Tighten the grub screw on the bottom edge of the hook a Allen key. Be careful not to over-tighten the screw.
Check the hook is secure
CONTACT
- corston.com/support
- hi@corston.com
- 01249 549332
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>