CHAUVET DJ Spot 360X IP LED Moving Head User Manual

June 12, 2024
Chauvet DJ

CHAUVET DJ Spot 360X IP LED Moving Head - logo 2 LED Moving Head
User Manual

Before You Begin

What Is Included

  • Intimidator Spot 360X IP
  • Hanging bracket
  • Power cable
  • Quick Reference Guide

Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate the claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions

Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
A key to be pressed on the product’s control panel
ON A value to be entered or selected

Symbols

Symbol Meaning
Electrical warning. Not following these instructions may cause electrical

damage to the product, accessories, or the user.
| Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
| Important installation or configuration information. The product may not function correctly if this information is not used.
| Useful information.

Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetdj.com.
Intellectual Property
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
©Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and Intimidator Spot 360X IP are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.

Safety Notes
These Safety Notes include important information about installation, use, and maintenance.

  • ONLY connect this product to a grounded and protected circuit.

  • DISCONNECT from power before cleaning or replacing the fuse.

  • DO NOT look at the light source when the product is on.

  • Make sure the power cord is not crimped or damaged.

  • Never disconnect this product from power by pulling on the cord.

  • When mounting this product overhead, ALWAYS use a safety cable.

  • DO NOT allow flammable materials close to the product when it is operating.

  • DO NOT touch the product’s housing when it is on because it will be hot.

  • The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.

  • DO NOT open this product. It contains no user-serviceable parts.

  • DO NOT submerge this product (IP65). Regular outdoor operation is fine.

  • Not for permanent outdoor installation in locations with extreme environmental conditions.
    This includes, but is not limited to:
    – Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
    – Where the normal high or low temperatures of the location exceed the temperature ranges in this manual.
    – Locations that are prone to flooding or being buried in snow.
    – Other areas where the product will be subject to extreme radiation or caustic substances.

  • Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

  • Be sure that no ventilation slots on the unit’s housing are blocked.

  • Never connect this product to a dimmer or rheostat.

  • Never carry the product by the power cord. Use only the hanging bracket or handle to carry this product.

  • The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.

  • In the event of a serious operating problem, stop using immediately.

  • To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document.

Introduction

Product OverviewCHAUVET DJ Spot 360X IP LED Moving Head - Product
Overview WARNING! DO NOT plug anything other than a data connection into the USB C port. Doing so may cause damage to the product.
Product DimensionsCHAUVET DJ Spot 360X IP LED Moving Head - Product
Dimensions

Setup

AC Power
The Intimidator Spot 360X IP has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.

  • Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
  • To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Fuse Replacement

  1. Disconnect the product from power.
  2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
  3. Remove the blown fuse.
  4. Replace with a fuse of the same type and rating.
  5. Screw the fuse holder cap back in place and reconnect power.

Disconnect the product from the power outlet before replacing the fuse.

Power Linking
The product provides power linking via the outlet located in the back of the product. See the diagram below for further explanation.
Power Linking DiagramCHAUVET DJ Spot 360X IP LED Moving Head - Power
Linking Diagram It is possible to power link up to 5 Intimidator Spot 360X IP products on 120 VAC or up to 9 Intimidator Spot 360X IP products on 230 VAC.
The power linking diagram corresponds to the North American version of the product ONLY!
If using the product in other markets, consult with the local Chauvet distributor as power linking connectors and requirements may differ by country or region.

Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The Intimidator Spot 360X IP may be mounted in any position; however, make sure adequate ventilation is provided around the product.
Rigging

  • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.
  • Make sure adequate ventilation is provided around the product.
  • Make sure that the structure or surface onto which the product is being mounted can support the product’s weight. (see the Technical Specifications)
  • When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
  • When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
  • When power linking multiple products, mount the products close enough for power linking cables to reach.
  • When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.

Mounting DiagramCHAUVET DJ Spot 360X IP LED Moving Head - Mounting
Diagram

Operation

Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel.

Button Function
Press to find an operation mode or to back out of the current menu

option

| Press to scroll up the list of options or to find a higher value | Press to scroll down the list of options or to find a lower value | Press to activate a menu option or a selected value

Menu Map
Refer to the Intimidator Spot 360X IP product page on www.chauvetdj.com for the latest menu map.

Main Level Programming Levels Description
Address 001-512 Sets the DMX starting address
Run Mode DMX 14CH

08CH
Slave| Slavel-4| Selects Slave mode 1, 2, 3, or 4
Auto| Selects Auto mode
Sound| Selects Sound-Active mode
RF| RF 1-4| Sets the product to work with the RFC-XL remote in group 1, 2, 3, or 4
(RF remote must be bound to the product first)
| RFP| Sets the product to work with public RF signal
| Pan| 000-255| Manual pan control
| Tilt| Manual tilt control
| Color| Manual color control
| Gobo| Manual rotating gobo control
Manual| Gobo
Rotate| Manual gobo rotation control
| Prism| Manual prism control
| Focus| Manual focus control
| Dimmer| Manual dimmer control
| Shutter| Manual shutter control
Setup| Pan Reverse| OFF| Normal pan operation
ON| Reverse pan operation
Tilt Reverse| OFF| Normal tilt operation
ON| Reverse tilt operation
Screen Reverse| AUTO| Automatic display orientation
NO| Normal display
YES| Reverse display
Pan Angle| 540| Selects the 540° pan angle range
360| Selects the 360° pan angle range
180| Selects the 180° pan angle range
Tilt Angle| 270| Selects the 270° tilt angle range
180| Selects the 180° tilt angle range
90| Selects the 90° tilt angle range
Totem Mode| OFF| Does not restrict the pan and tilt motion
UP| Restricts the pan and tilt motion for overhead mounting
DOWN| Restricts the pan and tilt motion for surface/floor mounting
Sensitivity| 001-100| Sets sound sensitivity
Main Level| Programming Levels| Description
---|---|---
Setup (cont.)| DMX Loss| Hold| Holds the last setting when signal is lost
Black| Blacks out the product when signal is lost
Auto| Sets the unit to Auto mode when signal is lost
Sound| Sets the unit to Sound mode when signal is lost
USB Update| NO| Enables/disables software update through USB-C
YES
RF| BIND| Shows instructions on how to bind the RF remote to the product
Reset| Resets the product
Factory Set| Loads factory defaults
Sys Info| Ver:| V| Displays the firmware version
Running Mode:|
| Displays the current running mode
DMX Address:| | Displays the current DMX address
Temperature:|
| Displays the current product temperature
LED FAN:| | Displays LED fan information
Base Fanl:| | Displays base fan information

Configuration (DMX)
The Intimidator Spot 360X IP works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If choosing a starting address that is too high, this could restrict the access to some of the product’s channels.
The Intimidator Spot 360X IP uses up to 14 DMX channels, which defines the highest recommended address to 499.
If not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:

  1. Press .
  2. Use or to select Address.
  3. Press .
  4. Use or to select the starting address, from 001–512.
  5. Press .

DMX Personalities
The Intimidator Spot 360X IP has two DMX personalities, a 14-channel personality, and a 08-channel personality.
To choose which DMX personality to use, follow the steps below:

  1. Press .
  2. Use or to select Run Mode.
  3. Press .
  4. Use or to select DMX.
  5. Press .
  6. Use or to select the DMX personality, from 14CH or 08CH.
  7. Press .

DMX Channel Assignments and Values 08CH/14CH

08CH 14CH Function Value Percent/Setting
1 1 Pan 000 255 0–540°
2 Pan fine 000 255 Fine control of panning
2 3 Tilt 000 255 0–270°
4 Tilt fine 000 255 Fine control of tilting
5 Pan/tilt speed 000 255 Pan/Tilt speed, fast to slow
3 6 Color wheel 000 006 White
007 013 Red
014 020 Orange
021 027 Yellow
028 034 Green
035 041 Blue
042 048 CTO
049 055 Cyan
056 062 Magenta
063 064 White
065 189 Color indexing
190 221 Color cycling rainbow, fast to slow
222 223 Stop
224 255 Reverse color cycling rainbow, slow to fast
4 7 Gobo wheel (see Gobos ) 000 007 Open
008 015 Gobo 1
016 023 Gobo 2
024 031 Gobo 3
032 039 Gobo 4
040 047 Gobo 5
048 055 Gobo 6
056 063 Gobo 7
064 071 Gobo 7 shake, slow to fast
072 079 Gobo 6 shake, slow to fast
080 087 Gobo 5 shake, slow to fast
088 095 Gobo 4 shake, slow to fast
096  103 Gobo 3 shake, slow to fast
104 111 Gobo 2 shake, slow to fast
112 119 Gobo 1 shake, slow to fast
120 127 Open
128 189 Cycle effect, slow to fast
190 193 Stop
194 255 Reverse cycle effect, slow to fast
5 8 Gobo rotation 000 063 Gobo indexing
064 145 Gobo rotation, slow to fast
146 149 Stop
150 231 Reverse gobo rotation, slow to fast
232 255 Gobo bounce, short to long, slow to fast
6 9 Pris 000 003 No function
004 006 3-facet prism
007 065 Prism rotation, slow to fast
066 123 Reverse prism rotation, slow to fast
124 127 3-facet prism
128 131 No function
08CH 14CH Function Value Percent/Setting
--- --- --- --- ---
6 (cont.) 9 (cont.) Prism (cont.) 132 134 5-facet prism
135 193 Prism rotation, slow to fast
194 251 Reverse prism rotation, slow to fast
252 255 5-facet prism
7 10 Focus 000 255 Focus
11 Dimmer 000 255 0–100%
8 12 Strobe 000 003 Off
004 007 On
008 076 Strobe, slow to fast
077 145 Pulse strobe, slow to fast
146 215 Random strobe, slow to fast
216 255 On
13 Function 000 007 No function
008 015 Blackout on pan/tilt movement
016 023 Blackout on color wheel movement
024 031 Blackout on gobo wheel movement
032 039 Blackout on pan/tilt/color wheel movement
040 047 Blackout on pan/tilt/gobo wheel movement
048 055 Blackout on pan/tilt/color wheel/gobo wheel movement
056 095 No function
096 103 Pan reset
104 111 Tilt reset
112 119 Color wheel reset
120 127 Gobo wheel reset
128 135 No function
136 143 Prism reset
144 151 Focus reset
152 159 All reset
160 255 No function
14 Movement macros 000 007 No function
008 023 Movement macro 1
024 039 Movement macro 2
040 055 Movement macro 3
056 071 Movement macro 4
072 087 Movement macro 5
088 103 Movement macro 6
104 119 Movement macro 7
120 135 Movement macro 8
136 151 Sound-active movement macro 1
152 167 Sound-active movement macro 2
168 183 Sound-active movement macro 3
184 199 Sound-active movement macro 4
200 215 Sound-active movement macro 5
216 231 Sound-active movement macro 6
232 247 Sound-active movement macro 7
248 255 Sound-active movement macro 8

Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

Automatic Programs
To run the Intimidator Spot 360X IP in automatic mode, follow the instructions below:

  1. Press .
  2. Use or to select Run Mode.
  3. Press .
  4. Use or to select Auto.
  5. Press .

Sound-Active Mode
To run the Intimidator Spot 360X IP in sound-active mode, do the following:

  1. Press .
  2. Use or to select Run Mode.
  3. Press .
  4. Use or to select Sound.
  5. Press .

Sound Sensitivity
To set the sound sensitivity on the Intimidator Spot 360X IP, follow the instructions below:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Sensitivity.
  5. Press .
  6. Use or to increase or decrease the sound sensitivity, from 001–100.
  7. Press .

The product will only respond to low frequencies of music (bass and drums).

Manual Mode
To operate the Intimidator Spot 360X IP manually through the menu, do the following:

  1. Press .
  2. Use or to select Run Mode.
  3. Press .
  4. Use or to select Manual.
  5. Press .
  6. Use or to select from Pan, Tilt, Color, Gobo, Gobo Rotate, Prism, Focus, Dimmer, or Shutter.
  7. Press .
  8. Use or to increase or decrease the value of the selected function, from 000–255.
  9. Press .
  10. Repeat steps 6-9 until the product is set as desired.

Configuration (Settings)
Pan Reverse
To set the pan orientation on the Intimidator Spot 360X IP, follow the instructions below:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Pan Reverse.
  5. Press .
  6. Use or to select OFF (normal pan orientation) or ON (reverse pan orientation).
  7. Press .

Tilt Reverse
To set the tilt orientation on the Intimidator Spot 360X IP, do the following:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Tilt Reverse.
  5. Press .
  6. Use or to select OFF (normal tilt orientation) or ON (reverse tilt orientation).
  7. Press .

Screen Reverse
To set the display orientation on the Intimidator Spot 360X IP, follow the instructions below:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Screen Reverse.
  5. Press .
  6. Use or to select AUTO, NO (normal display orientation) or YES (reverse display orientation).
  7. Press .

Pan Angle
To set the pan angle range on the Intimidator Spot 360X IP, do the following:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Pan Angle.
  5. Press .
  6. Use or to select from 540 (540°), 360 (360°), or 180 (180°).
  7. Press .

Tilt Angle
To set the tilt angle range on the Intimidator Spot 360X IP, follow the instructions below:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Tilt Angle.
  5. Press .
  6. Use or to select from 260 (260°), 180 (180°), or 90 (90°).
  7. Press .

Totem Mode
To activate the Totem mode, do the following:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Totem Mode.
  5. Press .
  6. Use or to select OFF (normal range of motion), UP (upward tilt range), or DOWN (downward tilt range).
  7. Press .

USB Update
To enable or disable the USB update function, follow the instructions below:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select USB Update.
  5. Press .
  6. Use or to select NO (disabled) or YES (enabled).
  7. Press .

RF Bind
To view the RF Bind on the Intimidator Spot 360X IP, do the following:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select RF BIND.
  5. Press .
  6. Follow the prompt on the screen.

Reset
To reset all functions on the Intimidator Spot 360X IP, do the following:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Reset.
  5. Press .

Factory Reset
To restore the Intimidator Spot 360X IP to factory default settings, follow the instructions below:

  1. Press .
  2. Use or to select Setup.
  3. Press .
  4. Use or to select Factory Set.
  5. Press .

System Information
To view the system information on the Intimidator Spot 360X IP, do the following:

  1. Press .
  2. Use or to select Sys Info.
  3. Press

Master/Slave Mode
The Master/Slave mode allows a single Intimidator Spot 360X IP product (the “master”) to control the actions of one or more Intimidator Spot 360X IP products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in standalone mode, while the slave products will be set to operate in slave mode. Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:

  1. Press

    .

  2. Use or to select Run Mode.

  3. Press .

  4. Use or to select Slave.

  5. Press .

  6. Use or to select from Slave1, Slave2, Slave3, or Slave4.
    •Select Slave1 for 100% synchronized actions.
    •Select Slave2, Slave3, and/or Slave4 for delayed actions, creating a wave effect.

  7. Press .

  8. Connect the DMX input of the first slave product to the DMX output of the master product.

  9. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.

  10. Finish setting and connecting all the slave products.

Master product:

  1. Set the master product to operate in standalone mode.
  2. Make the master product the first product in the DMX daisy chain.
    • Configure all the slave products before connecting the master to the daisy chain.
    • Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
    • Do not connect more than 31 slaves to the master.

Zero Adjust Mode
The Intimidator Spot 360X IP contains a passcode protected mode which allows the user to calibrate and adjust several of the product’s operating parameters.
In order to access this mode, do the following:

  1. Press and hold for at least 3 seconds.
  2. Use (increases the selected value) and (selects the next value) to enter the passcode: 2323.
  3. Press .

In this mode, the zero positions and levels for the following can be adjusted:

Parameter Function
PAN Pan motor position
TILT Tilt motor position
COLOR Color wheel position
GOBO Gobo wheel position
GOBO ROTATE Gobo rotation position
PRISM 3-facet prism position
PRISM1 5-facet prism position
FOCUS Focus position
DIMMER Dimmer value
RED Red level
GREEN Green level
BLUE Blue level

To adjust the zero position or level of one of these parameters, follow the instructions below:

  1. Access the Zero Adjust mode.
  2. Use or to select the parameter to be adjusted.
  3. Press .
  4. Use or to increase or decrease the selected value, from 000–255.
  5. Press .

Maintenance

Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean the lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:

  1. Unplug the product from power.
  2. Wait until the product is at room temperature.
  3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
  4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
  5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
  6. Softly drag any dirt or grime to the outside of the transparent surface.
  7. Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.
Do not spin the cooling fans using compressed air because it they could be damaged.

Technical Specifications

Dimensions and Weight

Length Width Height Weight
11.8 in (299 mm) 8.5 in (217 mm) 15.9 in (406 mm) 23 lb (10.4 kg)

Note: Dimensions in inches are rounded.
Power

Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 120 V, 60 Hz 230 V, 50 Hz

Consumption
Operating Current
Power linking current (products)
Fuse| 190 W
2.4 A
2.37 A (5 products)
F 5 A, 250 V| 185 W
1.4 A
2.37 A (9 products)
F 5 A, 250 V
Power I/O| U.S./Worldwide| UK/Europe
Power input connector
Power output connector
Power Cord plug| Seetronic IP65-compatible
Seetronic IP65-compatible
Edison (U.S.)| Seetronic IP65-compatible
Seetronic IP65-compatible
Local Plug

Light Source

Type Color Quantity Power Current Lifespan
LED Cool white 1 100 W 4.3 A 50,000 hours

Photometrics

Strobe Rate Beam Angle Illuminance@2 m Illuminance@5 m
0 to 20 Hz 19° 23,978 lux 3,836 lux

Thermal

Maximum External Temperature Cooling System
113 °F (22 °C) Fan-assisted convection

DMX

I/O Connector Channel Range
3-pin XLR 08 or 14

Ordering

Product Name Item Code UPC Number
Intimidator Spot 360X IP 8011988 7.81462E+11

CHAUVET DJ Spot 360X IP LED Moving Head - Symbol

Contact Us

General Information Technical Support

Chauvet World Headquarters
Address: 3360 Davie Rd.
Davie, FL 33314
Voice: 954-577-4455
Fax: 954-929-5560
Toll Free: 800-762-1084| Voice: 844-393-7575
Fax: 954-756-8015
Email: [email protected]
Website: www.chauvetdj.com
Chauvet U.K.
Address: Pod 1 EVO Park
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB
UK
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110| Email: [email protected]
Website: www.chauvetdj.eu
Chauvet Benelux
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice: +32 9 388 93 97| Email: [email protected]
Website: www.chauvetdj.eu
Chauvet France
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France
Voice: +33 1 78 85 33 59| Email: [email protected]
Website: www.chauvetdj.eu
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany
Voice: +49 421 62 60 20| Email: [email protected]
Website: www.chauvetdj.eu
Chauvet Mexico
Address: Av. de las Partidas 34 – 3B
(Entrance by Calle 2)
Zona Industrial Lerma
Lerma, Edo. de México, CP 52000
Voice: +52 728-690-2010| Email: [email protected]
Website: www.chauvetdj.mx

Warranty & Returns
For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu /warranty-registration.

Intimidator Spot 360X IP User Manual Rev. 2

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Chauvet DJ User Manuals

Related Manuals