Prorenfort PRO-E-2230A LED Warning Light Bars Instruction Manual
- June 1, 2024
- Prorenfort
Table of Contents
Prorenfort PRO-E-2230A LED Warning Light Bars
Function
| Wire Colour | Function | Connect To |
|---|---|---|
| Red | Power | +12/24 VDC (Power) |
| White | Ground | – (Ground) |
| 8-pin Connector | Pattern Selection | Control Box |
Permanent Mount with Adjustable Brackets
Pattern Selection (8 Flash Patterns)
- This light has sequences of flashes per pattern
NO. Pattern
| 1 | Left & Right Alternating Quad Flash ( 2 sequences ) |
|---|---|
| 2 | Left & Right Alternating Quad Flash, Full Unit Quad Flash ( 3 sequences |
)
3| Full Unit Quad Flash ( 1 sequence )
4| Left & Right Alternating Single Flash ( 2 sequences )
5| Centre Quad Flash, Left & Right Quad Flash ( 2 sequences )
6| Left to Right Sequential Flash ( 6 sequences )
7| Right to Left Sequential Flash ( 6 sequences )
8| Centre Single Flash, Centre to Left & Right Sequential Flash ( 4
sequences )
Hardware List
Installation Instructions
- Install support brackets to the lamp using the hardware provided
- Install the
lamp on the vehicle using tightening hooks - Run 12.8ft feed cable (8-pin Connector) from lamp to control box
- Install control box;
- Attach 6” white wire to the ground
- Attach 6” red wire to the battery feed
- Use the control box for flash pattern selection
Product Specifications
- Model : LED Warning Light Bars (PRO-E-2230A / PRO-E-2450A)
- Power Supply : +12/24 VDC
- Patterns: 8 flash patterns
- Mounting: Permanent mount with adjustable brackets
- Connector: 8-pin Connector
- Dimensions: Specific to the model
Frequently Asked Questions (FAQ)
Q: How do I change the flash pattern on the LED Warning Light Bars?
A: To change the flash pattern, use the control box provided with the light
bars. Follow the instructions in the user manual for pattern selection.
Q: Can I install the light bars on any vehicle?
A: The light bars are designed for universal use but ensure compatibility
with your vehicle’s electrical system before installation.