Prorenfort E-2161A Standard Amber LED Warning Light Bar Instruction Manual
- June 1, 2024
- Prorenfort
Table of Contents
- Prorenfort E-2161A Standard Amber LED Warning Light Bar
- Product Usage Instructions
- FAQ
- Bracket Mount
- Wiring Information
- Pattern Selection
- Magnetic Mount
- ON/OFF Switch
- Flash Pattern Button
- Synchronization
- Flash Patterns
- Suggested Switch Connection
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Prorenfort E-2161A Standard Amber LED Warning Light Bar
Product Specifications
- Series: E-2161
- Mounting Options: Bracket Mount (E-2161A / E-2161AC / E-2161AB), Magnetic Mount (E-2161AM / E-2161ACM / E-2161ABM)
- Power Input: +12 V DC
- Ground: – Ground
- Flash Patterns: 19 different flash patterns available
- Dimming Function: Optional with specific switch connections
- Fuse Requirement: Light should be fused with 5 Amp Fuse (ATM05 sold separately)
Product Usage Instructions
Installation
- Determine the mounting option based on your model (Bracket Mount or Magnetic Mount).
- Connect the Red wire to +12 V DC and the Black wire to – Ground.
Pattern Selection
- Briefly connect the Yellow wire (Pattern Selection) to the Red wire (Power) to cycle through patterns.
- Quickly connect the Yellow wire to the Red wire three times to flash pattern #1.
Synchronization
- Ensure all lamps are set to the same pattern before synchronization.
- Connect the Yellow wires of all units together for synchronization.
Dimming Function (Optional)
If dimming is required, follow the specific switch connections provided in the manual.
FAQ
Q: Can I disassemble the lamp or cut the wires?
A: No, disassembling the lamp or cutting the wires will void the warranty.
Bracket Mount
E-2161A / E-2161AC / E-2161AB
Wiring Information
| Function | Wire Colour | Connect To |
|---|---|---|
| Power | Red | +12 V DC |
| Ground | Black | – Ground |
| Pattern Selection / Synchronization / Dimmer | Yellow | +12 V DC |
| Second Flash Mode | White | +12 VDC |
Light should be fused with 5 Amp Fuse (ATM05 sold separately)
Pattern Selection
Briefly Connect Pattern Selection wire (Yellow wire) to Power wire (Red wire)
- Once to the next pattern
- Quickly 3 times to flash pattern #1
Magnetic Mount
E-2161AM / E-2161ACM / E-2161ABM
ON/OFF Switch
Flash Pattern Button
Momentarily press the button
- Once to the next pattern
- Quickly 3 times to flash pattern #1
Synchronization
All lamps must be set to the same pattern before synchronization.
Connect Yellow Wires of all units together for synchronization.
Flash Patterns
| NO. | Flash Patterns |
|---|---|
| 1 | Random Patterns |
| 2 | Alternating Single Flash |
| 3 | Alternating Double Flash |
| 4 | Alternating Quad Flash |
| 5 | Alternating Quint Flash |
| 6 | Alternating Mega Flash |
| 7 | Alternating Ultra Flash |
| 8 | Simultaneous 4 Fast Single Flash / Alternating 4 Quad Flash |
| 9 | Simultaneous Fast Single Flash / Alternating Fast Single Flash |
| 10 | Simultaneous Single Flash [ SAE Class 1 ] |
| NO. | Flash Patterns |
| --- | --- |
| 11 | Simultaneous Double Flash |
| 12 | Simultaneous Quad Flash |
| 13 | Simultaneous Quint Flash [ SAE Class 1 ] |
| 14 | Simultaneous Mega Flash |
| 15 | Simultaneous Ultra Flash [ SAE Class 1 ] |
| 16 | Simultaneous 8 Single Flashes / 4 Quad Flashes |
| 17 | Simultaneous 7 Slow Single Flashes / 7 Fast Single Flashes |
| 18 | Left Side Steady & Right Side Double Flash |
| 19 | Simultaneous Steady |
Suggested Switch Connection
(switches sold separately)
Read User Manual Online (PDF format)
Loading......