MOYAGOA FM0002 Locator Tag User Manual

MOYAGOA FM0002 Locator Tag

Open pairing broadcast

Long press the button (about 2S), and release it after hearing a beep sound [*Broadcasting time is 10 minutes, if it is not paired and bound for 10 minutes, the broadcasting will automatically turn off].

Pair device

1. Open Apple’s self-built-in ” Find My” App
2. Bring the device close to your iPhone, tap the “Items” tab, select “+”, and click on “AddOther Item”
3. For devices with the words’ Locator Tag ‘, tap’ Connect
4. Fill in “Name Item” to name your device and select an emoticon
5. Agree to register the device with your Apple ID
6. Tap ‘Finish’ to pair successfully.

Enable lost mode

1. Open Apple’s self-built-in “Find My” app, click on “Items” at the bottom of the screen, and click on the item’s name;
2. Under “Lost Mode”, click “Enable”;
3. Follow the instructions on the screen and click ‘Continue’ to enter the contact phone or email settings.
4. After clicking “Next” to check the information, please click “Enable” again to complete the setting.

Remove device

1. Open Apple’s self-built-in “Find My” app, click on “Items” at the bottom of the screen, and then click on the item’s name;
2. Find “Remove Item” at the bottom of the list and tap “Remove” to complete the operation.

Entering sleep mode

Long press the button, and you will hear 1 beep, 2 beeps, 3 beeps, and 3 beeps, then release the button, and enter the sleep state【 Long press the button (about 2S), exit the sleep state and enter the broadcast pairing mode after hearing a beep sound.】 Restore factory settings: Press and hold the button for a long time, and you will hear 1 beep, 2 beeps, and 3 beeps. Continue to press and hold the button after the beep sound, and release the button after hearing a long beep sound of “beep”, and then restore the factory state.

Main Functions

Locate your item
When the device and the iPhone are beyond the Bluetooth distance, the device cannot be linked in the “Find My” app. Available options: Lost Mode, select Enabled. Enter your contact number etc. If the device is disconnected from your iPhone for an extended
period and there are other iPhones nearby, you will receive notifications and the latest location in your “Find My”app.

Play Sound
The iPhone and the device are within the Bluetooth range (usually about 20 meters), in the ” Find My” APP, click ” Play Sound”, and the device will make a sound to help you quickly find nearby items.

Instructions for device button

Turn On
After installing the battery, the product will automatically turn on and enter the broadcast pairing mode [*Broadcast time is 10 minutes if it is not paired and bound for 10 minutes, the broadcast will automatically turn off].

Open pairing broadcast
Press and hold the button for about 2 seconds, hear a beep sound, and then release [*Broadcast time is 10 minutes, if not paired and bound for 10 minutes, the broadcast will automatically close].

The device re-enters the pairing state
When the device is removed, it will beep and the pairing broadcast will be on. If there is no re-pairing within 10 minutes, the device will leave the pairing state, and the device and APP cannot be paired at this time. If you need to pair the device, you need to follow the “Turn on the pairing broadcast” and enter the pairing state. At this time, you can re-pair with the APP.

Restore factory settings
Long press the button, you will hear 1 beep, 2 beeps, 3 beeps, beeps, beeps, and then continue to press the button to hear a beep Release the button after a long beep, and the factory status will be restored.

The device enters sleep mode
Long press the button, and you will hear 1 beep, 2 beeps, 3 beeps, and 3 beeps, then release the button and enter sleep mode.

Important tips
When pairing a device with the Findmy app, the phone will link to the Apple server. Pairing may fail because of network problems. The following actions are recommended:

1. Change the phone’s network, such as switching between WiFi and mobile network;
2. Factory reset of the equipment: press and hold the key for a long time, and then hear one prompt tone of “Di”, two prompt tones of “Di”, three prompt tones of “Di”, “Di”, and “Di”. Continue to press and hold the key for a long time, and then release the key after hearing a long prompt tone of “Di”. At this time, the factory status is restored;
3. Re-pair with the search app;
4. Restart phone

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device.  under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation This equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2BAUM-FM0002

Regulatory Safety Information
WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus. If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poison Information Centre for fast expert advice.

KEEP BATTERIES OUT OF REACH OF CHILDRE N

• Keep in original package until ready to use
• Call a local poison control center for treatment information.
• Australia: 13 11 26 Canada: 1-800-268-9017(Ontario)
• 1-800-567-8911(BC), 1-800-463-5060 (Quebec) US
• 800-498-8666.Verify suitably. emergency call numbers for your country.
• Do not use it if the compartment is not secure.
• Dispose of used button batteries promptly and safely. Flat batteries can still be dangerous.
• Risk of fire and burns.
• Do not recharge, disassemble, heat (-20°C +70°C)or incinerate.
• Rated voltage: 3V
• Rated current: 175 mAh

Safety Statement
According to the management method of low-power electric wave radiation motor

Article 12
Without permission, any company, firm, or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.

Article 14
The application of low-power frequency electric machinery shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists.

The foregoing legal communication refers to the wireless telecommunication operated according to telecommunications laws and regulations. The low-power frequency electric machinery should be able to tolerate the interference of the electric wave radiation electric machinery and equipment for legal communications or industrial and scientific applications.

Legal notice
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My Network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Watch, iPad, iPad, macOS, and watchOS are trademarks of Apple Inc. registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

FQA

When can the device be located by other iPhones?
When the device is disconnected from the owner’s iPhone for some time, the device can start to be located by other iPhones, and the owner can start to obtain the location of the device.

How to prevent the device from being used for malicious tracking?
When someone else’s device sneaks into your belongings and is tracked for longer than a period, you will be notified in two ways:

1. If you have an Apple device such as iPhone, iPad, or iPod touch, you will get a reminder on the Apple device; this function is available on Apple devices with iOS or iPadOS 14.5 and later.
2. If you don’t have an Apple device if someone else’s Locator Tag leaves its owner and has been following you for a while, it will play music to remind you when it moves.
3. Of course, don’t worry if you happen to have a friend with you or a lot of people on the subway you’re taking. As long as the device does not leave the owner’s side, such a reminder will not be triggered.

How to protect my privacy?
Where your device is, only you can see it. Your location data and history will never be stored in Apple’s and MOYAGOA’s servers. Devices passing your device’s location data remain anonymous at all times, too, and location data is encrypted every step of the way. As a result, neither Apple nor MOYAGOA knows where your device is, nor the identity of the device that helped find it.

How do I replace the battery?

1. Insert a coin into the battery cover rotation slot, rotate the battery cover, and open
2. Take out the old battery, and insert a new button battery (standard battery, which can be purchased in supermarkets) with the positive pole up.
3. Just install the shell of the device.

What is the Find My Network? And how does it work?
The Apple Find My network provides an easy, secure way to locate compatible personal items on a map using the Find My app on your iPhone, iPad, iPod touch, or Mac, or the Find Items app on your Apple Watch. Simply pair your compatible product with the Apple Find My app to view it right alongside your Apple devices. If your item ever goes missing, you can put it in Lost Mode to display a message and contact information to anyone who might find it. The Find My network is encrypted and anonymous, so no one else, not even Apple or MOYAGOA, can view its location.

European Union-Disposal InformationThe symbol above means that according to local laws and regulations, your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>