RitFit PWM01B Squat Rack Attachment Owner’s Manual

A GYM OF YOUR OWN

PWM01B Squat Rack Attachment

A GYM OF YOUR OWN
SQUAT RACK ATTACHMENT
PWM01B OWNER’S MANUAL & ASSEMBLY INSTRUCTIONS

SAFETY & PRECAUTIONS

IMPORTANT:  READ ALL PRECAUTIONS CAREFULLY BEFORE USING THIS PRODUCT.
RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.
Note:  This item is shipped in an unusual shaped box. Please hold on to the box until you feel there’s no need to return the product. Place the manual in a safe place in your home or office.
In the event should you find this product has either a defective or a missing part, do not use substitute parts or try to use the unit in an incomplete form. Please contact RITFIT for a replacement.
Additional features on products may be added during seasonal production but may not be featured in line art diagrams at time of production. Changes of such will not affect the performance or assembly of the unit.
If you would like further clarification during your assembly process please feel free to contact RITFIT for direction.
This product has been designed for or home use only.This exercise equipment was designed and built for optimum safety. However certain operator precautions apply whenever you operate a piece of exercise equipment.
Please note the following safety procedures:

1. Keep children and pets away from this equipment.
2. Always inspect equipment prior to use to assure the structual integrity. Some parts may need occasional maintenance due to wear and tear.
3. One person at a time should use this equipment .
4. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while using this equipment, stop the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
5. Before using this equipment, always do stretching exercise to warm up.
6. Keep hands and feet away from any moving parts that are not intended to have body parts near them  while in use.
7. Do not insert any object into any openings unless object is supposed to be inserted into a particular place (such as a pin in a rack).
8. Use this equipment only for its intended use as described in manual.
9. Always wear appropriate workout clothing and shoes when exercising. DO NOT WEAR ROBES OR OTHER CLOTHING THAT COULD BECOME CAUGHT IN THE EQUIPMENT.
10. If the wall on which the Wall-Mounted Frame is installed is unstable, uneven, or not perpendicular to the floor, the unit may fall and cause injury or property damage. If the installation of the Wall-Mounted Frame on the wall is not sufficiently sturdy, the unit may fall and cause injury or property damage. Be sure to install the Wall-Mounted Frame securely to the wall following the instructions in this instruction manual.
11. BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHISICIAN.
12. If you have any questions, please e-mail our customer service at support@ritfitsports.com.

PRODUCT USE AND MAINTENANCE
The RitFit® Wall-Mounted Frame should be repaired only by authorized persons. NEVER modify the RitFit® Wall-Mounted Frame or attempt to adjust or repair the unit equipment without first calling our Customer Service Department. Always notify authorized personnel to make such repairs.
WARNING

• THE MAXIMUM WEIGHT CAPACITY SHALL NOT EXCEED 660 LBS (300 KG).
• KEEP CHILDREN UNDER 13 AND PETS AWAY FROM THE WALL MOUNTED FRAME.
• INSPECT AND TIGHTEN ALL PARTS EACH TIME AND REPLACE ANY WORN PARTS IMMEDIATELY.
• PROVIDE FULL ATTENTION TO SAFETY DURING THE INSTALLATION, PERIODIC MAINTENANCE AND EXAMINATION OF THIS PRODUCT. RITFIT IS NOT LIABLE FOR ANY DAMAGE OR INJURY CAUSED BY MISHANDING OR IMPROPER INSTALLATION.

SQUAT RACK ATTACHMENT WARRANTY

A. What’s Covered Under RitFit LLC’s Basic Warranty?
Basic Warranty.
B. Who Is Covered?
You are covered by the Basic Warranty if you are a purchaser for use of the RitFit WallMounted Frame.
C. What’s Covered?
The Basic Warranty covers the cost of all parts and labor needed to repair any item on your Wall-Mounted Frame when it left the manufacturing plant that is defective in material, workmanship or factory preparation. These warranty repairs or adjustments will be made by RitFit at no charge, using new or remanufactured parts.
D. When It Begins?
The Basic Warranty begins on the day of order.
E. When It Ends?
The Basic Warranty lasts for 12 months from the date it begins.
F. What’s Not Covered?
Please note that while the standard Basic Warranty applies to defects in material  and/or workmanship, it does not cover the Wall-Mounted Frame’s matte finish appearance.Maintaining the matte finish appearance is solely the responsibility of the owner. Basic Warranty doesn’t cover damage caused by environmental factors such as airborne fallout, insect damage, chemicals, salt, and ocean spray. Nor do your warranty cover damage caused by hailstorms, windstorms, tornadoes, sandstorms, lightning, floods, and earthquakes. The warranty doesn’t cover any damage or injury caused by mishandling or improper installation. Your warranty does not cover conditions resulting from anything impacting the Wall-Mounted Frame.
G. How To Contact Us?
To ensure you receive the best technical support please visit www.ritfitsports.com to register your warranty. Customers with registered warranties are given a profile that allows for easier support and for us to contact you with important product notifications. If any parts are missing, worn, damaged or broken before the assembly, or you ever need to replace the parts, please contact us at support@ritfitsports.com.

BEFORE YOU BEGIN

Thank you for selecting the versatile RITFIT® Wall-Mounted Frame. RITFIT® Wall-Mounted  Frame is designed to be used with Wall-Mounted Frame Attachments (not included) as well asyour body weight to help you develop every major muscle group of the body.
For your benefit, read this manual carefully before using the Wall Mounted Frame. If you have additional questions, please email our Customer Service Department at support@ritfitsports.com.
To help us assist you, please note the product model number and serial number before calling. The model number is PWM01.
BEFORE READING FURTHER, PLEASE REVIEW THE DRAWING BELOW AND FAMILIARIZE YOURSELF WITH THE PARTS THAT ARE LABELED. CAPACITY: 660LB

PARTS LIST

FASTENER AND TOOLS

PACKED IN THE BOX

ASSEMBLY AND ADJUSTMENT

STEP 1

STEP 2

STORAGE THE PWM01B
Fold it up according to the way show in below to reduce occupied space. WARNING
The Squat Rack Attachment (PWM01B) needs to be used with the Wall-Mounted Frame (PWM01), and PWM01 must be installed on a trong solid wall. RitFit is not liable or any damage or injury caused by mishandling or improper installation.

END
Congratulations!
You have assembled the Squat Rack Attachment!
Now, you can officially start strength training with RITFIT.

A GYM OF YOUR OWN
www.ritfitsports.com
SUBSCRIBE WEBSITE AND GET
 Free Exercise Ebook
 Lastest Updates
GOT A PROBLEM? GET IN TOUCH
support@ritfitsports.com
GET SOCIAL WITH US
@ritfit. sports

Documents / Resources

| RitFit PWM01B Squat Rack Attachment [pdf] Owner's Manual
PWM01B Squat Rack Attachment, PWM01B, Squat Rack Attachment, Rack Attachment
---|---

References

• Home Gym Strength & Conditioning Equipment -RitFit USA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>