ideal lux PL-INS Play LED Ceiling Light Instruction Manual

June 1, 2024
ideal lux

ideal lux PL-INS Play LED Ceiling Light

Product Specifications

  • Brand: IDEAL LUX
  • Model: Play PL
  • Power: 7W
  • Voltage: 220-240V, 50/60Hz
  • LED Type
  • Color Options: BIANCO (White), NERO (Black)
  • EAN: 8021696258287 (BIANCO), 8021696268101 (NERO)

Product Usage Instructions

Installation

  • The lighting fitting should be installed by a qualified electrician. Follow the assembly instructions by reading the numerical progression.

Light Source

  • This product is provided with a light source with an energy efficiency class of G. The light source is replaceable by the end-user.

Control Gear

  • The control gear is replaceable by the end-user. Make sure to disconnect the power supply before starting any installation or maintenance.

Safety Instructions

  • Ensure to comply with European safety standards EN 60 598-1. If the external power cable is damaged, it should be replaced only by the manufacturer, retailer, or a qualified electrician.

Additional Safety Guidelines

  1. Always disconnect the power supply before any installation or maintenance.
  2. Avoid looking directly at the light source.
  3. Use appropriate fixing accessories for installation.
  4. Avoid disassembling the LED light source.

Frequently Asked Questions (FAQ):

Q: Can the LED light source be replaced by the user?

A: Yes, the LED light source is replaceable by the end-user.

Q: What should I do if the power cable is damaged?

A: In case of damage to the external power cable, it should be replaced only by the manufacturer, retailer, or a qualified electrician.

Dimension

  • Ceiling lamp
    • LED LED 7W / 220~240V 50/60Hz
    • 8021696258287 BIANCO
    • 8021696268101 NERO

Features

ideal-lux-PL-INS-Play-LED-Ceiling-Light-FIG-2

INSTALLATION INSTRUCTION

  • FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION.
  • QUALIFICATIONS THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN.ideal-lux-PL-INS-Play-LED-Ceiling-Light-FIG-3

This product is provided with a light source with efficient energy class of:

EANideal-lux-PL-INS-Play-LED-Ceiling-Light-FIG-5

LEGENDA ICONE

  • ideal-lux-PL-INS-Play-LED-Ceiling-Light-FIG-6Replaceable light source by an end-user.
  • Replaceable LED light source by an end-user.
  • ideal-lux-PL-INS-Play-LED-Ceiling-Light-FIG-8Replaceable light source by authorized personnel only.
  • Non-replaceable light source.
    • Upon the end of the life of the light source, the whole product will be replaced.
  • ideal-lux-PL-INS-Play-LED-Ceiling-Light-FIG-10Replaceable control gear by an end-user.
  • Replaceable light source by authorized personnel only.
  • ideal-lux-PL-INS-Play-LED-Ceiling-Light-FIG-12Upon the end of the life of the control gear, the whole product will be replaced.

SAFETY INSTRUCTIONS

  1. This fitting is produced and tested by the strictest European safety standards (EN 60.598-1).
  2. This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
  3. As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
  4. If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor, or by a qualified electrician.
  5. Always isolate power before commencing installation, maintenance, or repair.
  6. The luminaire contains certain parts which can be very hot.
  7. Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
  8. Always tighten the screws firmly to avoid contact problems.
  9. This fitting should only be installed indoors.
  10. Luminaires are not suitable for recessed on normally flammable surfaces.
  11. Luminaire is not suitable for direct mounting on normal flammable surfaces.
  12. This fitting is only suitable for fixing the ceiling.
  13. This fitting is only suitable for fixing the wall.
  14. The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
  15. Only use lamps that do not exceed the maximum specified wattage.
  16. Always observe the minimum distance between the lamp and the surface being lit, as shown in the icon. The lamp can cause a fire if the minimum distance is not observed.
  17. Auto-protected bulb. Only use bulbs marked with this symbol. Halogen bulbs get very hot. Wait until they cool down before replacing them.
  18. 18. Cracked or broken safety glass has to be replaced immediately. Use only manufacturer-approved parts complying with regulations.
  19. 19. Light source with not-substitutable light emitting diode (LED). Do not disassemble the product since the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Do not use solvents or strong detergents.
  20. 20. This fitting is equipped with a fuse. If the lamp is out of order, replace the internal fuse.
  21. 21. Class I Electrical safety is guaranteed by the main insulation and an additional protective conductor (earthing) connected to the metal frame of the lamp. Earthing is obligatory.
  22. 22. Class Il Electrical safety is guaranteed by the main insulation and double or reinforced insulation.
    • Earthing is not necessary.
  23. Class Ill Electrical safety is guaranteed by a very low power supply (less than 50 Volts). Earthing excluded.
  24. Not protected.
  25. Protected against solid objects greater than 50 mm.
  26. Protected against solid objects greater than 12 mm.
  27. Protected against solid objects greater than 2,5 mm.
  28. Protected against solid objects greater than 1mm.
  29. Dust protected.
  30. protected against dust infiltration.
  31. Not protected.
  32. Protected against vertically falling water drops.
  33. Protected against water drops falling with a maximum angle of 15° to the vertical axis.
  34. Protected against rain.
  35. Protected against splashing water.
  36. Protected against water jets.
  37. Protected against strong water jets.
  38. Protected against temporary immersion.
  39. Protected against prolonged immersion.
  40. Luminaire is not suitable for covering with thermally insulating material.
  41. Caution, risk of electric shock.
  42. Do not stare at the operating light source.ideal-lux-PL-INS-Play-LED-Ceiling-Light-FIG-13
  • DEAL LUX s.r.l.
  • Via Taglio Destro 32
  • 30035 Mirano (VE) Italy
  • www.ideal-lux.com
  • IDEAL LUX Warehouse
  • Via delle Industrie, 8/D
  • 30036 Santa Maria di Sala (Venezia)
  • 8.00 – 12.00 / 13.30 – 17.00

Documents / Resources

| ideal lux PL-INS Play LED Ceiling Light [pdf] Instruction Manual
PL-INS Play LED Ceiling Light, Play LED Ceiling Light, LED Ceiling Light, Ceiling Light, Light
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals