VOLLRATH R38738W Cafeteria Breath Guard Instruction Manual

: June 1, 2024
: VOLLRATH

Table of Contents

VOLLRATH R38738W Cafeteria Breath Guard
Product Usage Instructions
Installation Instructions
three Piece Breath Guard installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VOLLRATH R38738W Cafeteria Breath Guard

Specifications:

Product Name: Cafeteria Breath Guard
Model: One Piece and Three Piece options available
Manufacturer: Vollrath Company, L.L.C.
Item No.: 2350030-01 Rev 04/12

Product Usage Instructions

One Piece Breath Guard Installation:

Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1. Repeat for all four uprights.

Three Piece Breath Guard Installation:

Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2. Repeat for all four uprights
Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C). Repeat on the other side.
Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations
Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

FAQ:

Q: What should I do if I overtighten the cap nuts during installation?
A: Overtightening may cause the plastic to crack. If you overtighten, stop immediately and loosen the cap nuts slightly to avoid damage.
Q: Can I install the breath guard on my own without professional help?
A: Yes, you can follow the provided installation instructions carefully to install the breath guard on your own. However, if you encounter any difficulties, it is recommended to seek professional assistance.
Q: Is there a warranty for this product?
A: For information regarding warranties, please contact Vollrath Company, L.L.C. through their provided contact details.

Installation Instructions

One Piece cafeteria Breath Guard three Piece cafeteria Breath Guard

These instructions cover the installation of the one pica Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.
One Piece Breath Guard installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE:

Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
Figure 1. One Piece Breath Guard Installation
Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.

three Piece Breath Guard installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
Figure 2. Three Piece Breath Guard Installation
Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.