celexon Economy Tripod Screen Instruction Manual

celexon Economy Tripod Screen

Celexon Tripod Screen Economy is a projection screen designed to provide optimum performance and safety. It is easy to install and use. The product comes with a tripod stand, screen fabric, clamping nut, housing, clamping handle/carry handle, and tripod feet. The product is not suitable for use in areas with direct sunlight.

Warnings

• Please avoid any stains on the surface of the screen as they may not be removable. Keep the instructions in a safe place to refer to them at any time.
• The information in this document is subject to change without notice by the manufacturer.

Product Care Instructions

• Never clean the screen with alcohol or other cleaning agents containing solvents. Use only a soft and clean cloth. If necessary, use a mild soap solution to remove dirt from the surface.
• Avoid contact with sharp or pointed objects that could permanently damage the projection screen fabric. Do not use petrol, thinners, or similar solvents to clean the fabric.

Product Installation Notes

Install the screen in a position that is completely visible to all viewers. The optimum installation height corresponds to the position of the viewers centrally to the screen. Ideally, the viewer’s eye level will be level with the lower third of the screen surface. Do not place the projection screen in walkways or in fast-moving areas to prevent it from falling over and injuring people. When the screen is not in use, place it vertically on the stand and lean it against a wall to prevent it from falling over. Do not hang any objects on the screen.

Product Parts

• Tripod hook
• Upper bar
• Screen fabric
• Clamping nut
• Housing
• Clamping handle / Carry handle
• Tripod bar
• Tripod feet

Product Setting up the Screen

To set up the screen:

1. Place the screen vertically on the tripod feet and release the tensioning lever on the carrying handle.
2. Hold the screen by the handle and lift the case slightly while pulling the tripod feet downwards as far apart as possible and place the screen on them. For sizes over 200cm, 2 people are required to set up the screen.

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting or operating this product. Please retain these instructions for future reference.

Precautions

WARNINGS

The purpose of these operating instructions is to familiarise you with the operation of this product. Therefore, keep these instructions in a safe place so that you can refer to them at any time.

• Before installation or use, please refer to the enclosed data sheet with additional further safety and usage instructions.
• Do not start installation until you have read and understood the complete operating instructions.
• Carry out the installation with another person to ensure safe installation.
• Remove the product from its packaging and remove all packaging materials. Make sure that there is no packaging material on or in the product. If you notice any damage to the packaging, also check whether there is any damage to the product.
• If you notice any external damage to the unit or any unexpected or unusual functioning, do not continue to use the product. Contact the dealer from whom you purchased the product or celexon directly ( Web: www.celexon.co.uk, Mail: info@celexon.co.uk) for further information.
• This product is intended for indoor use and storage. Occasional outdoor use is possible and may only be carried out under supervision, in a max. wind force 1 and in dry conditions.
• The use of the screen and accessories is prohibited for children under 16 years of age.
• Ensure that children do not play with the appliance or stay in the vicinity without supervision.
• Conversion or modification of the product impairs product safety.
• Caution: Risk of injury! Never open the product without authorisation. Never carry out repairs yourself!
• Do not use the product in the vicinity of escaping gas, water or in a dusty environment.
• Handle the product with care. It can be damaged by knocks, blows or falling from a from even a small height.
• Keep the product away from moisture and heat.
• Never immerse the product in water or other liquids.
• Only use the product in its intended manner. Any other use may result in damage to the product or its surroundings.
• Caution: Risk of injury! The unit closes flush and firmly when retracted. Keep fingers, hands or other small parts away from the opening.
• Failure to follow the above instructions may result in personal injury and damage to the product or equipment, or devices connected to it. Incorrect installation or use may also invalidate the warranty.
• If you are unsure about the use of the product, please contact your specialist personnel, your dealer or celexon directly ( Web: www.celexon.co.uk, Mail: info@celexon.co.uk).
• Technical changes and errors expected.

The manufacturer accepts no responsibility for damage to property or personal injury if the screen is used outside the recommended specifications, or in the event of improper installation. Do not use this screen in the vicinity of heaters or air conditioners. If possible, do not use the product in direct sunlight or in front of a window. Due to the temperature-sensitive material of the screen the projection screen fabric may become deformed (flatness).

We recommend that you wait approx. 2 hours after delivery before installing the projection screen fabric. This way the projection screen can acclimatise, especially if it is moved from a cold to a warm environment. Please avoid any stains on the surface of the screen. These may not be able to be removed.

DISCLAIMER

• The information in this document is subject to change without notice by the manufacturer. Changes will be added to subsequent versions of this manual.
• The manufacturer does not guarantee or warranty for the correctness of the information in this document.

CARE INSTRUCTIONS

NEVER clean the screen with alcohol or other cleaning agents containing solvents. Use only a soft and clean cloth. If necessary, use a mild soap solution to remove dirt from the surface. Avoid contact with sharp or pointed objects. These could permanently damage the projection screen fabric. For further information, please refer to the enclosed projection screen instructions.

1. Do not position or store the screen in areas where direct sunlight shines on the screen.
2. Keep the screen fabric free of dirt or particles so as not to damage the surface of the screen and spoil the projection result. If the screen is dirty, clean it with a soft cloth and lukewarm, mild soap solution. Then wipe again with clean water so that no soap residue remains. The fabric must not be soaked, but only wiped with a slightly damp cloth. It must be completely dry before being retracted.
3. Please do not use petrol, thinners or similar solvents to clean the fabric.

IN THE BOX

• 1 x Tripod screen

INSTALLATION NOTES

Install the screen in a position that is completely visible to all viewers. The optimum installation height corresponds to the position of the viewers centrally to the screen. Ideally the viewer‘s eye level will be level with the lower third of the screen surface. Do not place the projection screen in walkways or in fast-moving areas to prevent it from falling over and injuring people.

1. Do not touch the screen fabric while you are extending or retracting the screen.
2. Do not place the screen on unstable or uneven surfaces, the screen could fall or tip over. Be careful children are not left alone in the room with the screen.
3. When the screen is not in use, place it vertically on the stand and lean it against a wall, for example, to prevent it from falling over.
4. Do not hang any objects on the screen.

PARTS

SETTING UP THE SCREEN

• STEP 1: Place the screen vertically on the tripod feet and release the tensioning lever on the carrying handle.
• STEP 2: Hold the screen by the handle and lift the case slightly while pulling the tripod feet downwards as far apart as possible and place the screen on them. For sizes over 200cm, 2 people are required to set up the screen.
• STEP 3: Hold the screen by the carrying handle and rotate the stand 90° so that the screen can be extended upwards. Adjust the housing to the desired height and tighten the tensioning lever. Do not release the housing by the carrying handle until the tension lever is tight.
• STEP 4: Loosen the tensioning nut, turn the stand hook forward and carefully pull the cloth vertically upwards. Hang the fabric on using the loop in the centre of the upper bar.
• STEP 5: With one hand, grasp the back rod of the stand, with the other hand the carrying handle and adjust the screen to the desired height. Then screw the tensioning nut hand-tight again.
• STEP 6: The integrated keystone bracket is located at the top of the stand rod. This can be used to correct for angled projection if required.

PACKING AWAY THE SCREEN

• STEP 1: Unhook the retaining bracket at the top of the screen from the stand hook and slowly guide the screen back into the housing until the screen is fully retracted.
• STEP 2: Now loosen the tensioning nut on the stand rod and push the rod back together to its original length. Tighten the tensioning nut carefully again.
• STEP 3: Loosen the tensioning lever on the carrying handle and return the housing to its original position, then secure the tension lever.
• STEP 4: Rotate the enclosure 90 degrees back to the vertical position. It may be necessary to Release the tension lever again allowing the enclosure to move upwards so that it does not hit the ground when turning. Afterwards tighten the lever again.
• STEP 5: Fold the tripod feet together.

At the upper end of the housing end cap you will find a round recess into which the tripod hook is inserted for transport. To do this, loosen the rod and insert the hook into the recess. Afterwards, the tensioning nut should be tightened again and the screen can be transported via the carrying handle. If you use a tripod bag from celexon (sold separately) the rod does not have to be inserted into the inlet for the screen to fit into the bag.

celexon Europe GmbH

• Gutenbergstraße 2 48282 Emsdetten

References

• High quality screens & accessories directly from the manufacturer | celexon.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>