Ronix RP-U111 Universal High Pressure Washer Instruction Manual

Ronix RP-U111 Universal High-Pressure Washer

Product Information

Specifications

• Model: RP-U111
• Power:
• Voltage:
• Frequency:
• Motor Type:
• Max Pressure:
• Max Rated Flow:
• Dimension:
• Supplied in Detergent Tank Type:

Product Usage Instructions

Purpose

The high-pressure cleaner is designed to clean vehicles, machines, buildings, facades, etc. in the private sector.

Areas of Application

IMPORTANT : This machine is not suitable for connection to the potable water mains.

Important Safety Instructions

• This appliance is not intended for use by children or individuals with limitations.
• Inspect the machine for defects before use. Do not operate if any defects are found.
• Electrical connections should be made by a qualified electrician.
• Use only recommended cleaning agents to ensure safety.
• Do not use the appliance near individuals without protective clothing.

Parts List

• Turbo Nozzle Lance
• On/Off Switch Water Outlet
• G08 Gun
• 5m High-Pressure Hose 1/2 HPC Quick Connector
• Inlet Filter Water Inlet
• Power Cord Cord Hook

Especially Check
Ensure the power cord insulation is intact. Have it replaced by an authorized distributor if damaged.

Frequently Asked Questions (FAQ)

• Q: Can I use this appliance without reading the instruction sheets?
  A: It is not recommended to use the appliance without reading the instruction sheets for safety reasons.

• Q: Are there any specific safety precautions I should follow while using the high pressure washer?
  A: Yes, ensure you wear protective clothing, use recommended cleaning agents, and keep the machine on a stable surface during operation to prevent accidents.

• Q: What should I do in case of an accident or breakdown?
  A: Switch off the machine immediately and take necessary precautions such as rinsing with clean water in case of contact with detergent.

SPECIFICATIONS

Includes

| Quick connector, Water inlet nut, Adjustable and turbo Lances,

5-meter High-pressure PVC hose, Detergent Tank, High-pressure Gun,

PARTS LIST

PURPOSE

• The high-pressure cleaner is designed to clean vehicles, machines, buildings, facades, etc.
• In the private sector.

AREAS OF APPLICATION

• Never use the machine in potentially explosive areas under any circumstances.
• The operating temperature must be between 0 and +40°c
• The machine consists of an assembly with a pump, which is encased in a shock-absorbing housing. for an optimal working position, the machine comes with a lance and a non-slip Handle grip. Whose shape and configuration comply with the appliance regulations.
• Do not cover or modify the lance or the spray nozzles in any way.
• The high-pressure cleaner is designed to be used with cold or lukewarm (max.40°c)water; higher temperatures can damage the pump.
• Do not use water that is dirty, gritty or contains any chemical products, as these could impair operation and shorten the life of the machine.
• Accessories can be used to carry out work with foam cleaners, and sand spraying.

IMPORTANT:
This machine is not suitable for connection to the potable water mains.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!
This appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely. Before starting up your machine please check it carefully for any defects. If you find any, do not start up your machine and contact your distributor

ESPECIALLY CHECK
The insulation of the power cord should be faultless and without any cracks. If the power cord is damaged, an authorized distributor should replace it.

WARNING!

• Do not use this appliance without reading these instruction sheets.
• The electric supply connection shall be made by a qualified electrician and comply with IEC60364-1.
• The electric supply to this appliance should include either a residual current device that will interrupt the supply if the leakage current to earth exceeds 30Ma for 30ms or device that will interrupt the earth circuit.

WARNING!
This appliance has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of other cleaning agents or chemical may adversely affect the safely of the appliance.

WARNING!
Do not use the appliance within range of the person unless they wear protective clothing.

WARNING!

• High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the appliance itself.
• do not direct the jet against yourself or others to clean clothes or footwear,
• risk of explosion – do not spray flammable liquids.
• disconnect from the electrical power supply before carrying out user maintenance.
• high pressure cleaners shall not be used by children or untrained personnel.
• to ensure appliance safety, use only original spare parts from the manufacturer or approved by the manufacturer.

WARNING!
Water that has flown through backflow preventers is considered to be non- potable.

WARNING!
The machine shall be disconnected from its power source during cleaning or maintenance and when replacing parts for mains-operated machines by removing the plug from the socket outlet.

WARNING!
High-pressure hoses, fittings and couplings are important for the safety of the appliance. Use only hoses, fitting and couplings recommended by the manufacturer.
do not use the appliance if a supply cord or important parts of the appliance are damaged, e.g. Safety devices, high-pressure hoses, and trigger guns.

WARNING!
If an extension cord is used, the plug and socket must be of watertight construction.

WARNING!
Inadequate extension cords can be dangerous.
This high-pressure washer must not be used at temperatures below 0°C.

WARNING!

• Cord on drums should always be completely unwinded to prevent the cord from overheating.
• If an extension cord is used, the plug and socket must be of watertight construction.
• Inadequate extension cords and be dangerous.
• Power cord connections should be kept dry and off the ground.
• if the power cord is damaged, it must be replaced by the manufacturer or his service agent or a similarly qualified person to avoid a hazard.
• Keep the machine on a stable and flat surface during operation, handling, transportation and strong. sudden overturn of a machine will cause body injury.
  In the event of an accident or breakdown, switch off the machine immediately. (e.g. contact with detergent: rinse with an abundance of clean water)

ATTENTION:
Through poor conditions of the electrical MAINS, short voltage drops can appear when starting the EQUIPMENT. this can influence other equipment (e.g. Blinking of a lamp). If the MAINS-IMPEDANCE Zmax <0.335 OMH, such disturbances are not expected. (in case of need, you may contact your local supply authority for further information.)

ELECTRICAL SHOCK HAZARD
Improper connection of the equipment –grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you are unsure if an outlet is properly grounded. DO NOT modify the plug provided with the appliance to fit an outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT:
Only use water without any impurities. If there is a risk of running sands in the inlet water (i.e. from your well), an additional filter should be mounted.

• Safety devices
• The unloader valve can reduce pressure if it exceeds pre-set values. the spray gun features a locking device. When the pawl is activated, the spray gun cannot be operated.
• Thermal sensor
  A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the thermal sensor has cooled

ASSEMBLY

• Position the washer as NEAR as possible to the water supply. The washer must be used standing on a secure, stable, position as shown.
• Fit the lance into the gun and rotate it until the two parts are completely locked.
• Connect the gun to high pressure hose
• Connect the high-pressure hose to the water outlet on the washer.
• Connect the water supply hose to the female coupler. Then connect to the water inlet of the washer. The supply hose must have an internal diameter of at least 13mm (1/2 in) and must be reinforced. the water supply must be at least equal to the washer delivery capacity.

OPERATION

• Turn on the water supply tap fully.
• Release the safety lock then press the trigger for a few seconds to allow air to escape and discharge residual pressure in the hose.
• Keeping the trigger pressed push the switch to start the motor.
• When re-starting the motor, always keep the trigger pressed.

NOTE:
THE MOTOR ONLY RUNS WHEN THE TRIGGER IS OPERATED.

CORRECT USE OF STANDARD ACCESSORIES

• The washer is equipped with an adjustable nozzle.
• The jet adjustment from pencil to the fan.

WARNING!
DO NOT ADJUST THE NOZZLE WHILE THE TRIGGER IS SQUEEZED.

RECOMMENDED CLEANING PROCEDURE

• Dissolve dirt by applying detergent with the fan jet to the dry surface. on vertical surfaces, work from the bottom upwards. leave the detergent to act for 1 to 2 minutes, but do not allow to dry out. Apply the high from the surface, working from the bottom upwards.
• Avoid allowing the rinsing water to run onto unwanted surfaces

STORAGE

• Switch off the washer.
• Turn off the water supply tap.
• After use, the detergent residuals should be removed from the tank.
• Discharge residual pressure by pressing the trigger until no more water comes out of the lance nozzle.
• Engage the gun safety lock.
• Remove the plug from the socket.
• Operate the washer with non-corrosive /non-toxic antifreeze before storing it for the winter.

WARNING!
BEFORE REUSING, COMPLETELY FLUSH THE UNIT OUT WITH PLAIN WATER. ANTI-FREEZE CAN DAMAGE PAINTWORK SO YOU MUST ENSURE THERE IS NO ANTI-FREEZE LEFT IN THE SYSTEM BEFORE USING IT AGAIN.

MAINTENANCE

CAUTION:
Before working on the washer, disconnect the lug from the power supply socket.

• to ensure good performance. check and clean the suction and detergent filters after every 50 hours of operation.
• clean the nozzle with the tool provided. remove the lance from the gun, remove any dirt from the nozzle hole and rinse.

TROUBLESHOOTING

Disconnect from the electrical power supply before carrying out user maintenance or checking is correctly functioning. To avoid unnecessary disappointments, you should check the following before contacting the service organization.

Machine refuses to start

| Machine not plugged in defective socket fuse has blown defective extension cord| Plug in machine try another socket replace fuse. switch off other machines. Try without the extension cord.

Fluctuating pressure

|

Pump sucking air valves dirty worn out or stuck pump seals worn out.

| Check that hoses an the connections are airtight.

Clean and replace or refer to local distributor

Clean and replace or refer to local distributor

Machine stop

| Fuse has blown incorrect mains voltage Thermal sensor activated nozzle partially blocked| Replace fuse. switch off other machines. Check that the mains voltage corresponds to specification on the model tag.

Leave the washer for 5 minutes to cool down. clean the nozzle

Fuse blows

|

Fuse to small

| Change to an installation higher than the amp. consumption of the machine.you may try without the extension cord.

Machine pulsating

| Air in inlet hose Inadequate supply of mains water

Nozzle partially blocked

Water filter blocked hose kinked

| Allow machine to run with open trigger until regular working pressure resumes. Check that the water supply corresponds to the specifications required

NB! Avoid using long, thin hoses(min.1/2”) Clean the nozzle

Clean the filter Straighten out hose

Machin often starts and stops by itself| Pump/spray gun is leaking center.|

Contact your nearest service

Machine starts

, but no water comes out

| Pump/hoses or accessory frozen no water supply water filter blocked| Wait for pump/hoses or accessory to thaw.

Connect inlet water. Clean the filter

 | Nozzle blocked| Clean the nozzle

www.ronixtools.com|

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>