celexon 1091780 Screen Ultra Mobile Professional Instruction Manual

: June 9, 2024
: celexon

Table of Contents

celexon 1091780 Screen Ultra Mobile Professional
DISCLAIMER
CARE INSTRUCTIONS
IN THE BOX
INSTALLATION NOTES
SETTING UP THE PROJECTOR SCREEN
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

celexon 1091780 Screen Ultra Mobile Professional

celexon-1091780-Screen-Ultra-Mobile-Professional-fig-1

Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully before connecting or operating this product. Please retain these instructions for future reference.

WARNINGS

The purpose of these operating instructions is to familiarise you with the operation of this product. Therefore, keep these instructions in a safe place so that you can refer to them at any time.
- Do not start installation until you have read and understood the complete operating instructions.
- Remove the product from its packaging and remove all packaging materials. Make sure that there is no packaging material on or in the product. If you notice any damage to the packaging, also check whether there is any damage to the product. If you notice any external damage to the unit or any unexpected or unusual functioning, do not continue to use the product. Contact the dealer from whom you purchased the product or celexon directly (Web: www.celexon.co.uk, Mail: [email protected]) for further information.
- To ensure trouble-free operation, the product must only be used indoors, it is NOT suitable for outdoor use.
- The use of the screen and accessories is prohibited for children under 16 years of age.
- Ensure that children do not play with the appliance or stay in the vicinity without supervision.
- Conversion or modification of the product impairs product safety.
- Caution: Risk of injury! Never open the product without authorisation. Never carry out repairs yourself!
- Do not use the product in the vicinity of escaping gas, water or in a dusty environment.
- Handle the product with care. It can be damaged by knocks, blows or falling from a from even a small height.
- Keep the product away from moisture and heat.
- Never immerse the product in water or other liquids.
- Only use the product in its intended manner. Any other use may result in damage to the product or its surroundings.
- Caution: Risk of injury! The unit closes flush and firmly when retracted. Keep fingers, hands or other small parts away from the opening.
- Failure to follow the above instructions may result in personal injury and damage to the product or equipment, or devices connected to it. Incorrect installation or use may also invalidate the warranty
- If you are unsure about the use of the product, please contact your specialist personnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail: [email protected]).
- Technical changes and errors expected.
The manufacturer accepts no responsibility for damage to property or personal injury if the screen is used outside the recommended specifications, or in the event of improper installation. Do not use this screen in the vicinity of heaters or air conditioners. If possible, do not use the product in direct sunlight or in front of a window. Due to the temperature-sensitive material of the screen the projection screen fabric may become deformed (flatness).
We recommend that you wait approx. 2 hours after delivery before installing the projection screen fabric. This way the projection screen can acclimatise, especially if it is moved from a cold to a warm environment.
Please avoid any stains on the surface of the screen. These may not be able to be removed.

DISCLAIMER

The information in this document is subject to change without notice by the manufacturer.
Changes will be added to subsequent versions of this manual. The manufacturer does not guarantee or warranty for the correctness of the information in this document.

CARE INSTRUCTIONS

NEVER clean the screen with alcohol or other cleaning agents containing solvents. Use only a soft and clean cloth. If necessary, use a mild soap solution to remove dirt from the surface. Avoid contact with sharp or pointed objects. These could permanently damage the projection screen fabric. For further information, please refer to the enclosed projection screen instructions.

Do not position or store the screen in areas where direct sunlight shines on the screen.
Keep the screen fabric free of dirt or particles so as not to damage the surface of the screen and spoil the projection result. If the screen is dirty, clean it with a soft cloth and lukewarm, mild soap solution. Then wipe again with clean water so that no soap residue remains. The fabric must not be soaked, but only wiped with a slightly damp cloth. It must be completely dry before being retracted.
Please do not use petrol, thinners or similar solvents to clean the fabric.

IN THE BOX

1x Projector screen

INSTALLATION NOTES

Do not place the projection screen in walkways or in fast-moving areas to prevent it from falling over and injuring people.

Do not touch the fabric while you are moving the screen in or out.
Do not place the screen on unstable or uneven surfaces, as the screen could fall or tip over. Be careful that children are not alone in the room with the screen.
When the screen is not in use, roll the cloth into the case.
Do not hang anything on the screen.

SETTING UP THE PROJECTOR SCREEN

STEP 1:
Remove the telescopic rod from the underside of the housing.
STEP 2:
Turn the adjustable foot on the underside of the housing by 90° to the front.
STEP 3:
Insert the telescopic rod into the hole in the centre of the top of the housing. Make sure that the rod is inserted as far as it will go.
STEP 4:
Pull the cloth out of the housing and hang it on the top of the telescopic rod. Loosen the lock and pull the telescopic rod to the desired height.
STEP 5:
To close the screen again, follow the steps in reverse order. Please note: If not used for a longer period of time, increased resistance can be expected during set-up.