Woodpeckers Undermount Drawer Base Owner’s Manual

Undermount Drawer Base

“`html

Specifications:

• Product: Woodpeckers Undermount Drawer Base
• Manufacturer: Woodpeckers, LLC
• Location: Strongsville, Ohio
• Contact: mailroom@woodpeck.com | 800-752-0725 (9:00 a.m. to
  5:00 p.m. EST Monday – Friday)

Product Usage Instructions:

Assembly:

1. Remove the Drawer Slide Extension C-2 by flexing the end of the
   Black Plastic Release up or down in direction and pulling away from
   the Drawer Slide. (Refer to Figure 1)

2. Attach the Drawer Slide Extension to the Drawer using 3 Pan
   Head Screws C-1. Use only the round holes on the Drawer Slide
   Extension. (Refer to Figure 2)

3. Repeat steps 1 & 2 for the other side of the Drawer.

4. Attach the Drawer Slide C-2 to the Drawer Base 1 using the 3
   Pan Head Screws C-1. Ensure the back of the Drawer Slide with a
   Black Bumper is at the back side of the Front side of the Drawer
   Base. Use only the shorter flange and round holes on the Drawer
   Slide. (Refer to Figures 3 & 4)

5. Repeat step 4 for the other side of the Drawer Base.

6. Locate the Drawer Base where you want it and mark the location
   of the 6 mounting holes with a pencil. The shorter bent edge is the
   front of the Drawer Base. (Refer to Figures 5 & 5-A)

7. Drill the 6 holes with a 5/32 drill bit, .600 deep. Be careful
   not to drill all the way through your bench top.

8. Attach the Drawer Base to the underside of the table using 3
   Panhead Phillips Wood Screws through each side of the Drawer Base
   into the Table. Ensure the back of the Drawer Base is at the rear
   of the Table. (Refer to Figure 6)

9. Line up the Drawer Slides on the Drawer with the Slides on the
   Drawer Base and slide the Drawer in.

FAQ:

Q: Where can I find the most current version of the instruction

manual for this product?

A: The most current version of our instruction manuals are
available for download/print at woodpeck.com via the tool’s page
under Additional Information or Instructions tabs.

Q: How can I stay updated on new products and sales from

Woodpeckers?

A: Subscribe to our eClub at woodpeck.com to be the first to
know about new products and sales. You can also subscribe to our
YouTube channel for tool tips & tricks and follow us on
Facebook & Instagram for more interaction.

Q: Is there a warning associated with this product?

A: Yes, this product can expose you to chemicals, including
chromium, which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information,
visit www.P65Warnings.ca.gov

“`

Woodpeckers”
UNDERMOUNT DRAWER BASE
OWNER’ S MANUAL

DIAGRAM
1
2

(QTY) PART NAME
(1) Drawer Base (1) Drawer

HARDWARE BAG C

C-1

(12) 8-32 x 3/16″ Panhead Screw

C-2

(2) Drawer Slide (includes Drawer Slide Extension)

C-3

(6) #10 Panhead Phillips Wood Screw

HARDWARE BAG D no t sho w n Drawer Base Mounting to a Drill Press
D-1 (4) 5/16-18 Large Rectangular Nut D-2 (4) 5/16-18×3/4″ Hex Bolt D-3 (4) 5/16-18×1-1/4″ Hex Bolt D-4 (4 5/16-18 Hex Nut D-5 (4) 5/16 Washer D-6 (4) 1/4-20 Rectangular Nut D-7 (4) 1/4-20 x 3/4″ Hex Bolt D-8 (4) #10 x 3/8″ Phillips Flathead Wood Screw

If you think you’re missing anything, email us at mailroom@woodpeck.com. You can also call us at 800-752-0725 from 9:00 a.m. to 5:00 p.m. EST Monday – Friday.

ASSEMBLY
1. Remove the Drawer Slide Extension C-2 by flexing the end of the Black Plastic Release up or down in direction and pulling away from the Drawer Slide. Figure 1.

2. Using (3 Pan Head Screws C-1, attach the Drawer Slide Extension to the Drawer. NOTE: Use only the round holes on the Drawer Slide Extension.) Figure 2.

3. Repeat steps 1 & 2 for the other side of the Drawer.

4. Attach the Drawer Slide C-2 to

the Drawer Base 1 using the (3)

Pan Head Screws C-1. The back of

the Drawer Slide has a Black

Bumper at the end. The Black

Bumper end of the Drawer Slide

should be at the back side of the

Front side of the Drawer Base has a

Drawer Base. NOTE: Use only the shorter flange.

round holes on the Drawer Slide.)

Figures 3 &4.

5. Repeat step 4 for the other side of the Drawer Base.

NOTE: The Drawer Base front has shorter bent rib. It may be more convenient to turn your table or workbench upside down to do the next step.

6. Locate the Drawer Base where you want it and mark the location of the 6 mounting holes with a pencil. NOTE: The shorter bent edge is the front of the Drawer Base. Figures 5 &5-A.
7. Drill the 6 holes with a 5/32″ , .600″ deep. Be careful not to drill all the way through your bench top.
8. Attach the 1 Drawer Base to the underside of the table using (3) Panhead Phillips Wood Screws through each side of the Drawer Base into the Table. NOTE: Be certain the back of the Drawer Base is at the rear of the Table. Figure 6.
9. Line up the Drawer Slides on the 2 Drawer with the Slides on the 1 Drawer Base and slide the Drawer in.

Woodpeckers, LLC Strongsville, Ohio woodpeck.com
© 2022 Woodpeckers, LLC
At Woodpeckers we are constantly reviewing & improving our tools. The most current version of our instruction manuals are always available to download/print at woodpeck.com via the tool’s page.
(Located in the bottom section of the tool page under the “Additional Information” or “Instructions” tabs.)
Be the first to know all the new products & sales by subscribing to our eClub.
(Located at the top center of our webpage woodpeck.com.)
Subscribe to our YouTube channel to stay up-to-date on all the latest tool tips & tricks.
Interact with us! Follow us on Facebook & Instagram!
WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov

REV012722

References

• Woodworking Tools Designed and Made in USA | Woodpeckers
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>