celexon 32423_062 Expert Display Trolley Seoul Instruction Manual

celexon 32423_062 Expert Display Trolley Seoul

Thank you

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting or operating this product. Please retain these instructions for future use.

WARNINGS

These operating instructions are intended to familiarise you with the operation of this product. Keep this manual in a safe place so that you can refer to it at any time.

• Do not begin installation until you have read and understood the complete operating instructions.
• Carry out the installation with another person to ensure safe installation.
• Remove the product from its packaging and remove all packaging material. Make sure that no packaging material is on or in the product. If you notice any damage to the packaging, also check whether there is any damage to the product. If you notice any external damage to the unit or any unexpected or unusual functioning, the product must not be used any longer. Contact the dealer immediately, from whom you purchased the product or celexon directly (Web: www.celexon.co.uk, Mail: [email protected]) for further information.
• To ensure trouble-free operation, the product must only be used indoors, it is NOT suitable for outdoor use.
• The use of the product and accessories is forbidden to children under 16 years of age.
• Converting or modifying the product compromises product safety.
• Caution: Risk of injury! Never open the product without authorisation. Never carry out repairs yourself!
• Do not use the product near gas or water appliances or in a dusty environment.
• Handle the product with care. It can be damaged by knocks, blows or falling from even a small height.
• Keep the product away from moisture and heat.
• Never immerse the product in water or other liquids.
• Use the product only in its intended manner. Any use for any other purpose may damage the product or its surroundings.
• Tighten the screws, but do not overtighten them. Overtightening (e.g. by using a cordless screwdriver) can cause damage and impair the secure hold of the product.
• After mounting the product and other components, check that they are sufficiently strong and safe to operate.
• Suspended loads must be checked for strength and load-bearing capacity at least twice a year.
• Do not load the product with more weight than permitted. Pay attention to the maximum permissible carrying weight.
• Make sure that the product is not loaded asymmetrically, especially after the product has been adjusted.
• All supply lines and cables must not be subjected to any additional load and must be laid in such a way that they are not damaged or crushed.
• Failure to comply with the above instructions may result in personal injury and damage to the product or equipment connected to it. Incorrect installation or use may also invalidate the warranty.
• If you are unsure about the use of the product, please contact your specialist personnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail: [email protected]).
• Technical changes and errors excepted.

The manufacturer accepts no responsibility for damage to property or personal injury, if the bracket is used outside the recommended specifications, or in the event of improper installation.

DISCLAIMER

The information in this document is subject to change without notice by the manufacturer. Changes will be added to subsequent versions of this manual. The manufacturer does not guarantee or warranty for the correctness of the information in this document.

TECHNICAL DATA

• Suitable for display sizes: up to 65”
• Max. weight capacity: 50 kg

PACKAGE CONTENTS

• 1x Column incl. swivel head
  

• 1x Base plate incl. castors
  

• 4x Cable clip

• 4x M8x40 mm

• 4x M8x35 mm

• 4x M8x25 mm

• 8x Plastic cap

• 1x Open-end spanner
  

• 1x Allen key

INSTALLATION NOTE

Make sure that the display is firmly screwed to the mounting bracket to prevent the display from falling down during the rotation process. Otherwise serious injury or damage to the products may result.

Note: Make sure that the display used and any connected accessories do not exceed the maximum load of 50 kg.

STEP 1 I MOUNTING THE CHASSIS

Screw the open end of the column with 4 hexagon socket screws (M8x25) to the rolling frame. Make sure that the side of the column with the display holder is mounted in the direction of the wide side of the roller frame.

STEP 2 I MOUNTING THE SWIVEL HEAD

Slightly loosen the 8 screws on the swivel head (4 per side) so that the swivel head is released from the column. Be sure to hold the swivel head while loosening the screws and slide it to the desired position.

We recommend pushing the swivel head upwards as far as possible in order to achieve an ergonomically favourable working position. Then tighten the 8 screws again. Make sure that the display holder is parallel to the column.

Now turn the head plate 90° clockwise until the horizontal position is reached.

STEP 3 I MOUNTING DISPLAY

Screw 2 M8x40 (Samsung Flip 55“ and 65“) screws into the upper VESA threaded holes of the Flip. Screw in the screws only so far, that a gap of approx. 5 mm remains between the screw head and the display.

Now hang the display on the stand using the screws. For this it is important that you did not fully tighten the screws in the previous step. Carry out this step with two people.

Now screw the other two M8x40 screws into the lower VESA threaded holes and tighten all 4 screws.

The assembly is now complete.

STEP 4 I WIRING DISPLAY

Guide the cables on the back through the guide in the column. Make sure that you leave enough cable slack at the display to have enough cable available when rotating the display. Then fix the cable with the to the column with the clips included in the delivery.

The height of these clips can be selected to suit.

You should always have all 4 screws tightened on the display. Never turn the display if all 4 screws are not tightened, otherwise there is a risk of personal injury and damage to property.

Make sure that no one has their hands or other parts of their body in the area of the rotary head when you turn the display.

Customer Support

celexon Europe GmbH | Gutenbergstraße 2 | 48282 Emsdetten

References

• High quality screens & accessories directly from the manufacturer | celexon.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>