celexon 32422_061 HomeCinema Frame Instruction Manual
- October 30, 2023
- celexon
Table of Contents
Operating instructions
celexon HomeCinema Frame
32422_061 HomeCinema Frame
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully
before connecting or operating this product. Please retain these instructions
for future reference.
WARNINGS
The purpose of these operating instructions is to familiarise you with the
operation of this this product. Therefore, keep these instructions in a safe
place so that you can access them at any time.
- The purpose of these operating instructions is to familiarise you with the operation of this this product. Therefore, keep these instructions in a safe place so that you can access them at any time.
- Before installation, please refer to the enclosed data sheet for further safety and use instructions.
- Do not begin installation until you have read and understood the complete operating instructions.
- This product must be installed on a level, clean surface with sufficient space around the installation area.
- It is mandatory to carry out the installation of a frame screen with another person to ensure safe installation.
- Remove the product from its packaging and remove all packaging materials. Make sure that there is no packaging material on or in the product. If you notice any damage to the packaging, also check for damage to the product. If you notice any external damage to the unit or unexpected unusual functioning, do not continue to use or assemble the product. Immediately contact the dealer from whom you purchased the product or celexon directly (Web: www.celexon.co.uk , Mail: [email protected] ) for further information.
- To ensure trouble-free operation, the product must only be used indoors and is NOT suitable for outdoor use.
- The use of the screen and accessories is forbidden to children under 16 years of age.
- Ensure that no children play with the screen or are in the vicinity without supervision.
- Converting or modifying the product compromises product safety.
- Caution: Risk of injury! Never modify the product yourself. Never carry out repairs yourself!
- This product may only be used in its original, unmodified condition.
- Do not use the product in the vicinity of devices that emit gases or water or in a dusty environment.
- Handle the product with care. It can be damaged by knocks, blows or falling from a from even a small height.
- Keep the product away from moisture and heat.
- Never immerse the product in water or other liquids.
- Use the product only in its intended manner. Other use may result in damage to the product or its surrounding environment.
- Tighten the screws but do not overtighten them. Overtightening (e.g. by using a cordless screwdriver) this can cause damage and affect the secure hold of the screen.
- Suspended loads must be checked for strength and load-bearing capacity at least twice a year.
- Failure to follow the above instructions may result in personal injury and damage to the product or equipment attached to it. Incorrect installation or use may also invalidate the warranty may be voided.
- If you are unsure about the use of the product, please contact your specialist personnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail: [email protected] ).
- Technical changes and errors expected.
The manufacturer accepts no responsibility for damage to property or personal
injury, if the screen is used outside the recommended specifications, or in
the event of improper installation. Do not use this screen in the vicinity of
heaters or air conditioners. Also, do not mount the product in direct sunlight
or in front of a window. Due to the temperature-sensitive PVC surface, the
projection screen fabric may be permanently damaged.
We recommend that you wait approx. 2 hours after delivery before installing
the projection screen. This way you will allow the screen to acclimatise,
especially when moving from a cold to a warm environment (or vice versa).
Please avoid any stains on the surface of the screen. These may not be able to
be removed.
- Note the front and back of the fabric when attaching it.
- Please check ALL parts for damage or scratches before assembling!
- The screen may ONLY be assembled on a soft, padded surface. Otherwise the frame coating may scratch.
- For permanent flatness, please note the following:
1. Do not touch the projection surface with your hands
2. Do not fold the projection surface
3. Do not paint or write on the projection surface
DISCLAIMER
The information in this document is subject to change without notice by the
manufacturer. Changes will be added to subsequent versions of this manual.
Errors expected.
CARE INSTRUCTIONS
NEVER clean the screen with alcohol or other cleaning agents containing solvents. Use only a soft and clean cloth. If necessary, dirt can be removed from the surface with a mild soap solution (max. 5%). It is essential to avoid contact with pointed or sharp objects. These could permanently damage the projection screen fabric. Further instructions can be found in the enclosed projection screen instructions.
IN THE BOX
INSTALLATION NOTES
Before installation, please check that all the parts listed above are included! If parts are missing, contact the dealer from whom you purchased the product and wait for the parts to arrive before completing the installation. Install the screen in a position that is fully visible to all viewers! The optimum installation height corresponds to the position of the viewers in the centre of the screen with the screen fabric extended: eye level = lower third of the screen surface. The enclosed mounting material is intended for a solid stone wall. If necessary, obtain suitable mounting material for your Installation surface.
F = 65 mm (l <= 240 cm)
F = 87 mm (l > 240 cm)
Outer frame height (H) for screens
- Up to 240 cm screen width = projection surface (h)+130 mm
- Over 240 cm screen width = projection surface (h)+174 mm
Outer frame width (L) for screens
- Up to 240 cm image width = projection width (l)+130 mm
- Over 240 cm image width = projection width (l)+174 mm
STEP 1: ASSEMBLY FRAME
- Lay out the 4 aluminium struts on a soft surface (2x horizontal & 2x vertical) parallel to each other in a rectangle (Fig. 3). Push two corner connectors into each end of a horizontal frame piece and attach the two vertical frame pieces onto it (Fig. 4, 5 and 6).
- Slide the remaining two corner connectors into the lower horizontal frame and push them onto the vertical frame as shown in Fig. 7.
(Note: The two corner connectors must be pushed into the vertical frame at the same time and evenly, so do this step with help from a second person). Align the frame so that the holes in the corner connectors match the holes in the frame. Insert the M5x8mm screws into each hole, check again that the frame is correct and tighten the screws all around (6-8 Nm) (Fig. 8 and 9).
STEP 2: FABRIC ATTACHMENT
-
Insert the PVC rods into the fabric pockets. It is recommended to carry out this procedure with 2 people.
-
Spread out the fabric (observe the correct side!) and first fasten two tensioning hooks in each corner of the frame. Tension the fabric only in all 4 corners at first. Continue all the way round with all the other springs. (Fig. 10, 11 and 12).
Note: When tensioning the springs with the enclosed tool, always use one hand and pull the spring with the second hand until it can be hooked into the fabric. Carry out this step in pairs. The fabric may seem too small, but it must be as you have to put a lot of tension on the spring to achieve the flatness required.
-
Measure the distance between the two hanging points on the frame. The two wall brackets should each be positioned approx. 50cm from the outer edge. Mark the measurement on your wall (horizontally) and pre-drill holes for the wall brackets. Fix the wall brackets with the enclosed mounting material. Carefully hang the screen into the brackets (Fig. 13 and 14).
To mount the frame, two people should lift it, one on each side. Lift and hang
the frame at the same time onto the mounting brackets.
This completes the installation.
celexon Europe GmbH
Gutenbergstraße 2
48282 Emsdetten
Documents / Resources
|
celexon 32422_061 HomeCinema
Frame
[pdf] Instruction Manual
32422_061 HomeCinema Frame, 32422_061, HomeCinema Frame, Frame
---|---