Uixe SSL-12691 One Light Matte Black Modern Outdoor Wall Lantern with Clear Seeded Glass Instruction Manual
- October 30, 2023
- UIXE
Table of Contents
SSL-12691 One Light Matte Black Modern Outdoor Wall Lantern with Clear
Seeded Glass
Instruction Manual
ASSEMBLY INSTRUCTIONS
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the mounting unit, rubber rings and screws from the fixture.
STEP 2
Use the mounting screws to attach the mounting unit to the junction box(not
included).
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 3
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled green
ground screw. Then, connect the positive, negative and ground wires with the
supplied wire nuts. Secure with electrical tape.
STEP 4
Attach the fixture to the mounting unit through screw holes as shown, and
secure it with screws and rubber rings.
NOTICE: Please use caulk in the back plate and wall mounting surface to
prevent water from entering.
STEP 5
Install bulb (not included)
