UIXE OS0006 Outdoor Privacy Screen Instruction Manual

: October 30, 2023
: UIXE

Table of Contents

UIXE OS0006 Outdoor Privacy Screen
Outdoor Privacy Screen
Before Assembling
Installation Instructions
Vertically Install
Single Panel Installation
Horizontally Install
Available Patterns and Privacy Levels
TOOLS
Vertically Install
Single Panel Installation
Horizontally Install
Read User Manual Online (PDF format)
Download This Manual (PDF format)

UIXE OS0006 Outdoor Privacy Screen

Outdoor Privacy Screen

Address: 14404-14410 Best Avenue, Santa Fe Springs, CA 90670
Tel: 6265865869
Email: general@generalmarchant.com.

The Outdoor Privacy Screen is designed to provide privacy and block wind in outdoor spaces. If the privacy screen will be used in a strong wind area, we highly recommend using four Hex-Head SleevesAnchors to fix the privacy screen on solid ground.

Before Assembling

Before assembling the privacy screen, please follow these recommendations:

Wear gloves for safety.
Do not assemble the privacy screen on a hard surface.
Ask for a helping hand to make the installation process easier.
Use Hex-Head Sleeve Anchors to fix the privacy screen on solid ground if necessary, especially in strong wind areas.

Installation Instructions

The installation process for the Outdoor Privacy Screen depends on the pattern you have chosen and whether you want to install it vertically or horizontally. Please follow the appropriate instructions below:

Vertically Install

Choose your desired pattern.
Install the first panel, making sure it is level and plumb.
Continue installing panels until you reach the desired length.
If necessary, use Hex-Head Sleeve Anchors to fix the privacy screen on solid ground for extra stability.
Trim the last panel to fit if necessary.

Single Panel Installation

Choose your desired pattern.
Install the panel, making sure it is level and plumb.
If necessary, use Hex-Head Sleeve Anchors to fix the privacy screen on solid ground for extra stability.
Trim the panel to fit if necessary.

Horizontally Install

Choose your desired pattern.
Install the first panel, making sure it is level and plumb.
Continue installing panels until you reach the desired height.
If necessary, use Hex-Head Sleeve Anchors to fix the privacy screen on solid ground for extra stability.
Trim the last panel to fit if necessary.

Available Patterns and Privacy Levels

Quadra01 – 83% privacy
Block01 – 64% privacy
Parilla01 – 44% privacy
Web01 – 60% privacy
Brick01 – 86% privacy
Flowleaf01 – 65% privacy
Star01 – 83% privacy
Diagonal01 – 75% privacy
Bamboo01 – 79% privacy

If the privacy screen will be used in a strong wind area, we highly recommend you use four Hex-Head Sleeve Anchors to fix the privacy screen on solid ground.
Before assembling, we recommend:

Wear Gloves.
Don’t assemble the privacy screen on a Hard Surface.
Ask for a Helping Hand.
Use Hex-Head Sleeve Anchors to fix the privacy screen on solid ground if necessary.