UIXE SSL-12171 1-Light Matte Black Outdoor Lantern Instruction Manual
- October 30, 2023
- UIXE
Table of Contents
UIXE SSL-12171 1-Light Matte Black Outdoor Lantern Instruction Manual
ASSEMBLY INSTRUCTIONS
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
-
Fixture
-
Mounting Unit
-
Rubber Rings
-
Ball Nuts
-
Mounting Screws
-
Wire Nuts
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the rubber rings and ball nuts from the mounting unit. Use the
mounting screws to attach the mounting unit to the junction box (not
included).
STEP 2
Make the electrical connection from the junction (not included) box to the
fixture. Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Next, connect the positive, negative and ground wires with
the supplied wire nuts. Secure with electrical tape.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 3
Attach the fixture to the mounting unit through screw holes as show,and secure it with rubber rings and ball nuts.
NOTICE: Please use caulk in the back plate and wall mounting surface to
prevent water from entering.
STEP 4
Install bulb (not included
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>