NETGEAR GS308E 8-Port Gigabit Ethernet Plus Switch Installation Guide

NETGEAR GS308E 8-Port Gigabit Ethernet Plus Switch

Package Contents

• Switch model GS308E
• Power adapter (varies by region)
• Installation guide

Ethernet cables not included.

Register with the NETGEAR Insight App

Use the NETGEAR Insight app to register your switch, activate your warranty, and access support.

1. On your iOS or Android mobile device, visit the app store, search for NETGEAR Insight, and download the latest version of the app.
   

2. Open the NETGEAR Insight app.

3. If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions.

4. Enter the email address and password for your account and tap LOG IN.

5. Tap + in the upper-right corner.

6. Either use the camera on your phone to scan the serial number bar code located on the bottom of the switch, or enter the serial number.

7. Tap Go.

8. Follow the onscreen instructions to add your switch to a network location. The switch is registered and added to your account.

Connect the Switch

Sample Network Configuration

Discover the IP Address of the Switch

An IP address is required to configure your switch. The switch gets an IP address from a DHCP server (such as your router) by default. If your switch is not connected to a DHCP server, use the default IP address: 192.168.0.239.

1. Connect your mobile device to the same WiFi network as the switch.
2. Make sure that the network connects to the Internet.
3. Launch the NETGEAR Insight app from your mobile device.
4. Log in to your account. The current IP address of the switch displays.

Configure the Switch

We recommend that you use a web browser on a computer or tablet to configure the switch.
Note: If your computer is a Mac, use the NETGEAR Switch Discovery Tool, as described on the other side of this document.

1. Open a web browser from a computer or tablet connected to the same network as your switch. You can use a WiFi or wired connection.
2. Enter the IP address of the switch.
3. Enter the password. The default password is password. We recommend that you change the password to a more secure password.
4. Click the Login button.

Other Discovery and Configuration Methods

The NETGEAR Switch Discovery Tool and the ProSAFE Plus Utility also let you discover the IP address and configure the switch.

• NETGEAR Switch Discovery Tool. You can use a Mac or a 64-bit Windows-based computer that is on the same network as the switch. You can use a WiFi or wired connection. When you discover the switch, this tool provides access to the local browser interface to configure the switch. To download the NETGEAR Switch Discovery Tool, visit www.netgear.com/support/product/netgear-switch-discovery-tool.aspx.
• ProSAFE Plus Utility. To download the latest utility and user manual, visit www.netgear.com/support/product/PCU.

If you cannot discover or configure the switch, you might need to temporarily disable the firewall, Internet security, or antivirus programs. Make sure to reenable these security services after you discover and configure the switch.

Support

Thank you for purchasing this NETGEAR product. You can visit https://www.netgear.com/support/ to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.  (If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. Do not use this device outdoors. If you connect cables or devices that are outdoors to this device, see https://kb.netgear.com/000057103 for safety and warranty information.
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA
NETGEAR INTL LTD Building 3, University Technology Centre Curraheen Road, Cork, Ireland

Trademarks

© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.

FAQ’s

Can I connect the GS308E switch to another switch or hub?

Yes, you can connect the GS308E switch to another switch or hub to expand your network further. This is known as “daisy-chaining” switches.

Does the GS308E switch support jumbo frames?

Yes, the GS308E supports jumbo frames, which allows for larger data packets and can improve network performance in certain scenarios.

Can I use the GS308E switch with both Windows and Mac computers?

Yes, the GS308E switch is compatible with both Windows and Mac operating systems, as well as other devices with Ethernet connectivity.

What are the benefits of using a managed switch like the GS308E over an unmanaged one?

Managed switches, like the GS308E, offer advanced features like VLANs, QoS, and link aggregation, allowing for better control and optimization of your network.

How do I perform a factory reset on the GS308E switch?

To perform a factory reset, locate the reset button on the switch and hold it down for a few seconds until the LEDs flash. This will reset the switch to its default settings.

Can I use the GS308E switch in a home network with a mesh Wi-Fi system?

Yes, the GS308E can be used in conjunction with a mesh Wi-Fi system to provide additional wired connections for devices in your home network.

Does the GS308E switch support IPv6?

Yes, the GS308E switch supports IPv6, the latest version of the Internet Protocol, which is essential for modern network communication.

Is the GS308E switch suitable for small businesses or home offices with multiple users?

Yes, the GS308E is suitable for small businesses and home offices with multiple users, offering reliable and high-speed Ethernet connections.

Can I use the GS308E switch to connect IP cameras in a surveillance setup?

Yes, the GS308E can be used to connect IP cameras in a surveillance setup, providing a stable and fast connection for video streaming.

Can I enable port mirroring on the GS308E switch for network monitoring purposes?

Yes, the GS308E supports port mirroring, allowing you to monitor the traffic on a specific port for network analysis and troubleshooting.

Does the GS308E switch support link aggregation (port trunking)?

Yes, the GS308E supports link aggregation, which enables you to combine multiple ports to increase bandwidth and redundancy for critical connections.

Can I configure the GS308E switch using a web-based interface?

No, the GS308E uses the NETGEAR Plus Configuration Utility, a Windows-based software application, for configuration and management.

References:NETGEAR GS308E 8-Port Gigabit Ethernet Plus Switch – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>