edishine HFLAA1A LED Floor Lamp User Manual
- June 1, 2024
- edishine
Table of Contents
LED Floor Lamp
SPU: HFLAA1A
[User Manual]
V40110
Please pay attention to the warning signs
Read the instructions with caution before operating and keep it properly
Package Contents
1x LED Floor Lamp
1x Remote Control Set
1x Power Adapter
1x User Manual
1x Quick Start Guide
Specifications
| Input | AC 100–240V 50/ 60Hz |
|---|---|
| Output | DC 30V/ 1.2A |
| Power Consumption | 28W |
| Luminous Flux | 2500lm |
| SDCM | ≤6 |
| Color Rendering Index | >80Ra |
| Brightness Mode | 5%/ 25%/ 50%/ 75%/ 100% |
| Color Temperature | 2700K/ 4000K/ 5000K/ 6500K |
| LED Type | SMD2835 |
| Material | Steel, PC, Pmma |
| Weight | 4.28kg / 9.44 lb |
| Dimension | D305 x H1925mm / 12.0” x 75.78” |
Product Diagram
Product Assembly
Control instructions
Turn ON/OFF
Tap the tapping stick to turn on the LED lamp after plugging in the power.
Tap the again with your hand to turn off the LED lamp.
Turn ON / OFF night light
Tap the tapping stick to turn on the Warm colors with low brightness night
light, tap the again with your hand to turn off.
Adjusting the Brightness
When the LED is on, click this position to adjust the brightness to 5%/
25%/50%/ 75%/ 100%.
Color Temperature Mode
Pressing the “Color Temperature Button” will switch between
2700K/4000K/5000K/6500K.
Timed Lights Off
When the LED lamp is on, Tap the button, when the “Clock Indicator” lights
up the right half circle and a full circle, indicating the countdown 30
minutes / 60 minutes to turn off the light.
Note:
When the remote control does not work
By default the lamp fixture and remote are complete paired. If not, please
unplug the fixture from the charger, and within 30s of re-powering up after
complete power off, the remote control long press the ” ” button for 5s until
the ” ” indicator light on the touch control panel of the fixture blinks twice
to ompletely the pairing.
Multiple product pairings
If you buy more than one fixture, you can use the matching one remote control
to control more than one fixture at the same time, or the same fixture can be
paired using several different remotes. Follow point 1 to disconnect the
charger first, then power it up within 30s and use the remote to complete the
pairing.
The maximum number of fixture and remote pairs is 10. When this number is
exceeded, new pairs will overwrite the earliest pairing relationship in order.
How to disconnect the fixture from the remote control
If you want to release the connection between the remote control and the
lamps, refer to point 1, unplug the charger first, after completely
disconnecting the power, re-power on, long press the ” ” button on the remote
control for 5s within 30s, when “ ” on the body of the lamp flashes twice, it
means thatthe remote control and the lamps have been released from the control
connection.
Product Care
- Do not repair disassemble or modify under any circumstances;
- Do not place near any heat source or heat source or in direct sunlight;
- Do not place on uneven, unsecured desk or table;
- Use ONLY the supplied AC power adapter;
- Do not use the appliance with frayed or damaged electrical cords;
- Do not touch an electrical appliance with wet hands or when liquids are present;
- Please keep the lamp and all appliances dry and clean;
- Unplug the adapter when the lamp is not used;
- Power off before cleaning;
- Clean the lamp only with a soft dry cloth;
- Never overload electrical circuits as it may cause electrical shock or fine;
- If the remote connection fails, please watch the user manual carefully or contact after-sales customer service, we will reply within 24 hours.
Safety Information
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
ISEDC Warning:
This device complies with Innovation, Science, and Economic
Development Canad licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.
One Year Limited Warranty
Supported by our professional R&D team and QC team, we provide One Year
Warranty for materials and workmanship from the purchase date.
Please note that the warranty does not cover damage caused by personal misuse
or improper installation.
Please attatch your Order ID and Name so that our dedicated customer service
team can help you better.