Com2uS SUMMONERS War Angelmon Wireless Charger User Manual

Com2uS SUMMONERS War Angelmon Wireless Charger

LED indication

• Initial power connection · LED turns on yellow and turns off after 3 seconds
• Normal · No effect
• During charging · Continuously lit and LED color changes between yellow
• Fully Charged · Continuously lit with yellow LED lights

Exchange/Return

1. For basic exchanges and returns, please contact the seller.
2. Exchange/return is possible within 7 days from the date of receipt of the product, and the customer must pay the shipping cost for an exchange/return due to a simple change of mind.
3. If there is a problem within 14 days from the date of receipt of the product, the delivery fee is free of charge. (It is provided free of charge only during the 12-month warranty period. However, a fee may be required in case of malfunction due to customer negligence.)
4. To confirm the purchase date, please enclose the purchase receipt or online purchase statement
5. When applying for exchange or return, please indicate the reason for the defect.

Non-returnable

1. lf 7 days have passed since receipt of the product
2. If the packaging has been opened but the product has lost or decreased its sales value due to damage to the packaging
3. If there are signs of use or the product is damaged
4. In case of loss of product components
5. In case the value of the product has significantly decreased to the extent that resale is difficult due to the passage of time

Technical Support

1. Within the warranty period, free technical support is provided for failures that occur under normal use by the consumer.
2. Warranty period: 12 months
3. Even within the warranty period, malfunctions due to customer negligence or incorrect use may incur costs.
4. Technical support delivery fee requested during the technical support period, excluding initial defects, will be paid by the customer.
5. For technical support inquiries, please contact the sales office or store_cs@com2us.com.
6. Repair may not be possible if the customer arbitrarily repairs, remodels, or deforms the product, and technical support may not be provided in this case.

Quality indication according to the Electrical Appliances and Consumer Products Safety Control Act

• Product Name: Summoners War Angelmon Wireless Charger Material: ABS+PC,
• Silicon Manufacturer : Shenzhen Hoosung Technology Co., Ltd
• Importer: WI Co.,LTD
• Sales: Com2uS-Customer
• Center : store_cs@com2us.com
• Age of use : Over lSyearsold
• Warranty period : 12 months
• Manufacture Date : 2022. 04 Electromagnetic Compatibility
• Registration: R-R-FMY-SWWCAOOl
• Made in China

Product Specification

• Size: 187’126 106 mm (L x W x H)
• Weight: 240g
• Wireless Charging Distance: 6-8mm (Max.)
• Rated Voltage: 5V/2A, 9V/2A, 12V/1.5A
• Output: SW, 7.SW, lOW, lSW
• Power Port: USB Type-C
• Operating Temperature: 0-60°c
• Operating Humidity: 10-85%
• Compatible Devices: All devices compatible with Qi

Precautions

1. The device may be damaged if it is dropped from a high place or subjected to strong impact.

2. If you arbitrarily repair, disassemble, or modify the device, you cannot receive A/S.

3. Do not store or use near flammable materials or strong magnetic fields.

4. Use only in dry indoor places. Do not use in wet or humid places.

5. Do not store the device in a place that is too hot or too cold. It is recommended to use at room temperature.

6. If there is a problem with the device, immediately discontinue use, disconnect the charging adapter from the device, and contact customer service for assistance.

7. Do not use a non-compliant power supply or adapter.
   It may cause product malfunction, fire, or other hazards.

8. This product is not a toy. Keep out of reach of children.

9. We are not responsible for damage or defects caused by user negligence or error.

Usage Information

1. When charging an iPhone, ‘Fast Charging’ message is not displayed, and it shows ‘Charged’ .
2. If the smartphone case is too thick (more than 3mm) or made of metal or magnetic, wireless charging may not work properly.
3. Depending on the phone model , it may not support fast or wireless charging. Refer to your phone manual.
4. For fast charging, you must use QC3.0 or PD charger, and a fast-charging cable.
5. All wireless chargers charge very fast when the battery is below 30%. After that, the charging speed gradually slows.
6. Due to the nature of fast wireless charging, there may be some heat generated during charging.
7. If the battery temperature of the smartphone increases above a certain level, the charging speed may be slowed, or charging may be stopped for safety. If wireless charging is attempted in a high­ temperature environment, the smartphone itself may block wireless charging instead of the device. (e.g., under direct sunlight in summer)

Component

How to use

1. Connect the Type-C cable to the bottom port of the main body.
2. Place the center of the mobile phone on the charging part.
3. Charging starts when the LED lights up, and the LED blinks slowly while charging
4. The LED stays on once the phone is fully charged.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device, a distance of 15cm surrounding the device and 20cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>