HAGOR 8704 Easy Flex Single Installation Guide
- June 13, 2024
- HAGOR
Table of Contents
HAGOR 8704 Easy Flex Single
Caution!
Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.
Scope of delivery
The monitor arm is shipped compressed and under tension.
When cutting the cable tie firmly hold and brace both parts using your hands as shown or ask for the assistance by another person.
Failure to follow this process may result in personal injury or property damage.
Installation
oder | or
The monitor arm is shipped compressed and under tension.
When cutting the cable tie firmly hold and brace both parts using your hands as shown or ask for the assistance by another person.
Failure to follow this process may result in personal injury or property
damage.
Wenn der Bildschirm nicht in der gewünschten Position stehen bleibt, ziehen Sie bitte die Schrauben wie beschrieben nach.
If the display does not stop in the desired position tighten the screws as
shown.
Customers Support
HAGOR Products GmbH
Oberbecksener Straße 97
D-32547 Bad Oeynhausen
Telefon: +49(0)57 31-7 55 07-0
Mail: hagor@hagor.de
