KOFIRE UG-06 Wireless Gaming Headset User Manual

UG-06
USER MANUAL

LED Indicator Light Description

LED stays on indefinitely when paused
Incoming Call Status| The blue led light of the mic boom will stay on indefinitely after headphones power on, and the blue led light of the mic boom will go off if you press the mute button.
Charging Status| Orange LED stays on while in charging
Orange LED goes out while fully charged

Basic Key Operation
Turn On
Long press for 3 seconds, the headphone will turn on after blue LED stays on for 3 seconds.
Turn Off
Long press for 3 seconds, the blue and green LED will stay on for 3 seconds, then go out.

Volume Adjustment
Turn the volume control knob to the + side to turn up the volume, turn it to the – side to turn down the volume.
Music Selection
Short press or to skip to the next song or previous song.

Play/Pause/Phone call
Music Pause: Short press when in music playing.
Music Play: Short press when  in music pause.
Answer Calls: Short press when a call comes in.
Hang Up: Short press when on a call.
Refuse to Answer: Long press when a call comes in.
When Wireless is connected, a double press will re-dial the last phone number in your call record.

Headphone Turn On Status
Long press the On/Off button for 3 seconds, the headphone will turn on, and enter pairing status or re-connect to the last connected Wireless device.

Wireless Connection

After the headphone turns on, the blue and green LED will twinkle alternately. Turn on the Wireless in your cell phone and search for “UG-06”, click to connect. The blue LED will stay on indefinitely after connecting successfully, and the blue LED will flash slowly when music playing.

Mute the Boom Microphone

After power on the blue LED light on the mic boom will stay on indefinitely. Short press the mic mute button to mute the microphone, and the headphone will prompt “didi”, and the blue LED light on the mic boom will go off. Short press the mic mute button again to turn on the mic, it will prompt “di”, and the mic blue LED light will stay on indefinitely.

Language Switch

Turn on the headphone and don’t connect it with any devices, long press M button for 3 seconds for switching language between Chinese and English.

Charging Mode

When in a low battery, please charge it for around 2 hours with USB-C charging cable. The headphones will be turned off automatically while charging. Orange LED stays on indefinitely while in charging, and orange LED goes out while fully charged.

Power Status

When the headphone is connected to the IOS device, the current power status of the headphone will be shown on the upper right corner of the device screen. When the battery is low, it will prompt “battery low“.

Line-in Mode

• In the power-on state: plug in the audio cable, the headphone will automatically turn off, and you can listen to music on the audio cable.

• In the power-off state: plug in the audio cable, you can only listen to the music of the audio cable.
  Note:

• If you want to use Wireless, you need to unplug the audio cable and turn the headphone on.

Headphone Overview

Colorful Decoration LED Switch

After the headphones turn on, the colorful LED light defaults to be turned off. Long press the decoration LED light switch for 2 seconds to turn the LED light on. If you want to turn off the colorful LED light for saving battery or for other reasons, long-press the decoration LED light switch for 2 seconds to turn the LED light off. *Note: The decoration LED light will not work while the headphone is in charging or in wired mode.

Wireless Disconnection

In the non-calling state, long-press the and for 3 seconds to clear the pairing information. The green and blue LED stay on for 3 seconds, then the headphone will enter pairing status, and the green and blue LED will twinkle alternately.

Reset

Plugin the audio cable to turn off and reset the headphone when there is a crash.

Wireless Transmitter LED Indicator Description

For the First Time Using

1. Insert the Wireless transmitter into the USB port of the device, the device will automatically install the driver, the name displayed on the device is: UG-06, and the default is device audio transmission, the transmitter enters the standby state
   with the red LED lighting on indefinitely.

2. The Wireless device enters the pairing state after power on, long-press the button on the Wireless transmitter for 3 seconds to enter the pairing status, and the blue LED will flash quickly.

3. The Wireless transmitter is successfully connected with the Wireless device, and the blue LED will stay on indefinitely.

For the Second Time and Subsequent Using
When there is pairing information of the headphones on the device, for the second time using, the Wireless transmitter will automatically connect back to the wireless device.
Connect between transmitter and headphones when headphones connect the phone, the transmitter will not connect headphones. after headphones disconnect your phone, then press the button of the transmitter for
1 click, or long-press the button of the transmitter for 3 seconds then the transmitter will enter the pairing mode with headphones.

Power On

Insert the Wireless transmitter into the USB port of the computer and it will automatically turn on.

Power Off / Reset

Unplug the Wireless transmitter.
Wireless Connection
Long press the transmitter button for 3 seconds, the Wireless transmitter enters pairing status with the blue LED flashing quickly, now it supports listening to music, Wireless video playback, Wireless video calls, etc.
Wireless Disconnection
Short press the Wireless transmitter button, and the red LED will stay on indefinitely.
Clear Connection
In any state, long-press the transmitter button for 8 seconds, the blue and red LED light will stay on indefinitely.

Wireless Transmitter Parameters Information

Headphone Parameters Information

Packing List

1. Wireless Headphone| 4. Audio Cable
2. Wireless Transmitter| 5. User Manual
3. Charging Cable| 6. Microphone set

Warm Tips

1. Please charge the headphone with 5V 1A / 5V 2A charger, high voltage may damage the headphone.
2. When the headphone has not been used for more than 3 months, it needs to be charged before use.
3. When the headphone has not been used for a long time, we suggest you charge every 3 months to provide good protection for the battery.
4. We suggest you fully charge the headphone for the first time use.

Attentions

1. Please keep or use the headphone at normal temperature, avoid direct sunlight.
2. Please keep the headphone away from fire or other hot objects.
3. Please keep the headphone away from damp places or submerged in liquid, keep dry.
4. Please don’t try to use other methods of charging other than the USB charging cable we provide.
5. Please don’t disassemble, repair, or modify.
6. Please pay attention to excessive clash, if any damage (like dents, deformation, corrosion, etc.), please turn to us for assistance by the contact information on the warranty card.
7. If the headphone produces an abnormal smell, higher than normal temperature, color, or shape changes abnormally, please stop using and turn to us for assistance by the contact information on the warranty card.

Warning

1. If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or a similar overheating environment.
2. The device should not be exposed to water droplets or water splashes. It should not be placed in objects such as vases or similar objects filled with liquids.
3. This product is not a children’s toy. Children under the age of 14 need to be accompanied by parents to use.

Predict Modell Purchase Date:
Purchase ACCGAI:
User Name:
User °caress:

WARRANTY CARD

Product Sold.
Pacheco Store:
Reason for Warranty:
Mono Manisa:

Warranty Description

Please keep the warranty card and veld perches° proof properly. show It together when sexing the product to repair. If you can’t provide the warranty card or relevant sachem certificate, the calculation date of the product warranty will be based en the product manufacture date.

Warranty Regulations

1. If you lam any questions during use, please don’t hesitate to call 4008894883 for MP

2. Within one year from the presses date. if the product with equality issue and the Wheel staff of our carpel has calmed that the Wee occurs under normal use, we will provide a free replacement set

3. In the following cases, our company refuses to provide free warranty OWNS oaf provides maintenance services, free of labor costs, only charges for parts:
   A. The product main pal has been damaged due to incorrect operatic negligent use or irresistible mesons
   B. The product has been dismantled or repaired without our company authorization
   C. The headphone driver unit has been used at volume. and the delivery Is deformed due to darts or Impact. The headphone cable is broken, created, armored In water, the one Is damaged, defamed, and some other men-news damage reason.
   D. The original warranty cord and veld peaches° proof can’t be provided, and the purchase date Is beyond the warranty petted.

4. The free service provided by this warranty card does not Indude product accessories, and other decorations, gIft, etc.

Product Qualification Certificate
After inspection, the product meets the technical standards and is allowed to leave the factory.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>