UNISENSE OPTO-F1 UNIAMP Accurate Oxygen Quantification User Manual
- September 20, 2024
- UNISENSE
Table of Contents
UNISENSE OPTO-F1 UNIAMP Accurate Oxygen Quantification
Specifications:
- Model: OPTO-F1 UNIAMP, OPTO-F4 UNIAMP
- Manufacturer: UNISENSE A/S
- Warranty: One-year warranty
Product Information
Congratulations with Your New Product!
If you encounter any problems or need assistance, contact our sales and support team.
Warranty and Liability:
The warranty covers the Opto-F1 and Opto-F4 UniAmp meters for one year.
Overview:
Front view of the Opto-F1 and Opto-F4 UniAmp meters.
Getting Started:
- Install the SensorTrace Suite software from here.
- Connect the USB-C port of the meter to the USB port of the computer.
- Connect the microoptodes and temperature sensors (optional).
- Start the software following the SensorTrace Suite manual.
- Calibrate and perform measurements as needed.
Operating Environment:
The Opto-F1 and Opto-F4 UniAmp meters are suitable for laboratory use. Protect the amplifiers from humid, dusty, and corrosive environments to maintain performance and longevity.
FAQ
- Q: What should I do if my equipment needs repair?
- A: If the equipment is not covered by warranty, contact Unisense for repair with applicable charges.
- Q: Where can I find additional documentation and support?
- A: Visit www.unisense.com for further information and support resources.
CONGRATULATIONS WITH YOUR NEW PRODUCT
SuPPoRT, oRDERING, aND CoNTaCT INfoRMaTIoN
If you wish to order additional products or if you encounter any problems and need scientific/technical assistance, please do not hesitate to contact our sales and support team. We will respond to your inquiry within one working day.
- E-mail: sales@unisense.com
- Unisense A/S
- Tel: +45 8944 9500
- Further documentation and support is available at our website
- www.unisense.com
WARRANTY AND LIABILITY
- The Opto-F1 and Opto-F4 UniAmp meters are covered by a one-year warranty.
- The warranty does not include repair or replacement necessitated by accident, neglect, misuse, unauthorized repair, or modification of the product.
- In no event will Unisense be liable for any direct, indirect, consequential or incidental damages, including lost profits, or for any claim by any third party, arising out of the use, the results of use, or the inability to use this product.
REPaIR oR aDJusTMENT
- Equipment that is not covered by the warranty will, if possible, be repaired by Unisense with appropriate charges paid by the customer. In case of return of equipment please contact us for return authorization.
- For further information please see the document General terms of sale and delivery of Unisense A/S as well as the manuals for the respective products. Repair or adjustment
OVERVIEW
The Opto-F1 UniAmp and Opto-F4 UniAmp are compact and economical meters for the Unisense Opto-series of microoptodes. The two meters are 1 and 4 channels, respectively, with a separate temperature channel for each optical channel. A temperature sensor is needed for automatic temperature-compensated oxygen measurements. The four-channel meter may be used with one temperature sensor for compensation of all four oxygen signals or with one sensor for each oxygen signal. The Opto-F series meters are USB-powered and fully integrated with the Unisense SensorTrace Suite software, allowing the combination of the microoptode technology with the broad range of Unisense electrochemical microsensors (O2, H2S, NO, N2O, H2, pH, Redox and more).
GETTING STARTED
- Install the SensorTrace Suite software. Newest version is available here: http://www.unisense.com/Software_download/
- Connect the USB-C port of the Opto-F1 or Opto-F4 UniAmp to the USB port of the computer
- Connect the Opto-series microoptodes and the temperature sensors (optional)
- Start the software (consult the SensorTrace Suite manual for directions)
- The microoptode signal(s) are now visible on the computer screen and calibrations and measurements can be performed
- The tip of the microoptode may flash red depending on the state of the SensorTrace Suite
- a. Will flash once every 15 seconds if SensorTrace Suite is not logging or calibrating
- b. Will flash when an experiment is running in SensorTrace Suite. The rate is determined by the “Sampling interval” setting in the software
- c. Will flash during calibration (0.5 – 1 sec. intervals)
IMPORTANT: Please consult the separate manual for the Optoseries microoptodes for instructions about the microoptode and calibration of this.
OPERATING ENVIRONMENT
The Opto-F1 and Opto-F4 UniAmp meters are designed for laboratory use. Care must be taken to protect the amplifiers in humid, dusty, and corrosive environments (e.g. field conditions) since it may affect the performance, cause damage, or shorten the lifetime. If the amplifier is used outdoors, it should be protected in a plastic bag or similar.
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>