Keyhole Shells SplitKey Piano Shell User Manual
- October 30, 2023
- Keyhole Shells
Table of Contents
Milleteknik CEO3 V2.1 Output Control Module
Motherboard
PACKAGING CONTENTS
-
x1 – nose section
-
x1 – keybed section
-
x3 – Leg
-
x1 – Top
-
x1 – Lid
-
x6 – Leg Hardware ‘-
3/8″-18 x 1.5″ long wing screw -
x2 – Hinge Pin
Assembly Instructions
-
Begin with the keybed section of the piano upside down.
Attach two legs using the leg hardware.
-
Tip the keybed section to the orientation shown
-
Place the nose section onto the keybed section being careful to align the corners.
-
Use the toggle clamps (4) to anchor the nose section to the keybed section.
-
This is a good time to attach the pedal lyre – optional (see pedal lyre manual for instructions)
-
Place lid in position and line up the , hinges.
-
Insert the hinge pins.
-
This is the best time to install the keyboard and run wires.
-
Place top in position.
Assembly is complete!
Documents / Resources
|
Keyhole Shells SplitKey Piano
Shell
[pdf] User Manual
SplitKey Piano Shell, Piano Shell, Shell
---|---