Saibo GloryFit / FlagFit Smart Watch A19-0421 User Manual

Saibo GloryFit / FlagFit Smart Watch A19-0421 User Manual

Quic;k use instruciions for walc;hes

Note: Press and hold the button to turn on the watch.Instruction for Chargin

Instruction for Charging

Charging the device to active before the first time using; Ta charge your device, plug the charging cable into the adapter or USB port on your computer.

Instruction for Chargin

Install smart watchAPP

Device requirements: iOS 9.0 and above; Android 4.4 and above Bluetoolh 4.0 is supported.

Main funcilon lnterfac;e

Main interface/ dial Press and hold the touch screen on the main interface to enter.
Slide left and right to switch and click OK.The dial hasSstyles.

Step/distance/calorie • View the number of steps taken at anytime of the day, walking distance and calories burned.
Can be synchronized to the in time to view the sports data.

Heart rate interface

Switch to the heart rate test interface to enter the heart rate real time Monitoring, measurement data can be synchronized to the APP in time.
And have a test report.

Blood oxygen interface

Switch to the blood oxygen test interface toenter the real-time detection of blood oxygen. rest results are displayed directly on the bracelet interface.

TWheea wtheeart ihnetre irnfatecref ace will display the current weather; ”
Weather information needs to be connected to the app. , c.an get data, if disconnected for a long time, weather letter
The information will not be updated.

Stopwatch

Click the stopwatch icon to enter the stopwatch function. Swipe right

Message interface

On the main interface, slide into the message • interface and click the message icon to view the =- message.Click to turn the page, view the message to exit or right to exit.

Sports interface

Press the button on the main interface to enter the motion interface, right slide back to the main interface. Click on the motion map
The target can enter the motion mode detection.
Running, cycling, swimming, skipping, table tennis, badminton ,tennis. Press the button on the main interface to enter, slide up and
down to switch, click to start calculation, right slide to exit the current Sports mode.

Setting function interface

In the main interface, slide down to enter the setting function interface, you can choose
• Find phone” “Brightness adjustment’ ‘About’
‘Settings’Item. Click the icon to enterthe corresponding function settings.

Find the pho nterfa In the connected state, click the “Find” icon to enter, click, the phone will give a vibrate or ringtone reminder.
Idt-C You can freely choose the screen brightness by clicking the brightness adjustment icon.
About the interface= Click on the icon to display the model number of the machine and the last four digits of the Bluetooth address.
Click the restore icon to enter, you can restore the bracelet.
Shutdown interfac Click on the shutdown page to enter, you can shut down.
Other feature reminder The reminder function needs to set the open reminder switch on the APP side, and keep the mobile phone and the bracelet in the Bluetooth connection. In the successful state, the message is a vibration reminder.

Sleep monitoring function When you fall asleep, the bracelet will automatically judge to enter the sleep detection mode, automatically detecting you deep sleep/shallow all night Sleep/wake up time, calculate your sleep quality; sleep data only supports APP side view. Note: Sleep data will only be available when you wear the bracelet to sleep.
Pr- i•n
1: It is forbidden to use an adapter with a charging voltage greater than 5V and a charging current greater than 2A. The charging time is 2-3 hours. 2: Do not charge in case of water stains. 3: This product is an electronic product, not for medical reference, measurement data is for reference only. 4: Blood pressure test method. Quiet rest for more than 5 minutes before the test, do not enter 2 hours before the test food, smoking, taking medicine and drinking caffeine; testing process. Take a comfortable, restful sitting position and keep it flat A steady state of mind is forbidden to speak. Please The bracelet is at the same height as the heart (as shown on the right).

FCC Caution

This device complies with part 15 of the FCC Rules. 0pera1ion is subject to the following two conditions: (1)
This device may not cause harmful interference, (2) this device must accept any interference received, induding interference that may cause undesired opera1Jon .
Any Changes or modifications not e!<presdy approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Nole: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm fl.II interference in a residential in5’tllllation .
This equipment generates uses and am radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a p!llrticulu installation. If this equipment does cause harmful inll1rferen0!! to radio or television reception, which c.m be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenr.a.
-Increase the ~eparation between the equipment and receiver.
-Connect the equipment into c1n oudet on ii circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The devill!! has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>