HOLMES HAP9242 Air Purifier User Guide

HOLMES HAP9242 Air Purifier

Product Information

Specifications

• Model: HAP9242, HAP9414, HAP9422
• Filter Type: Total Air Odor Eliminator, Allergen Remover, Allergen PerformancePlus, Smoke Grabber
• True HEPA Technology: 99.99% particle removal efficiency
• Filter Series: aer1
• Warranty: 3-year limited warranty

Features

• Optional Ionizer: Releases positively charged particles to capture larger particles
• High, Medium, and Low-Speed Settings
• Filter Check Indicator

Product Usage Instructions

Troubleshooting

1. Check if the unit is properly plugged in and the outlet is energized.
2. Make sure the unit is turned ON.
3. Ensure that the filters are properly installed and the rear grill is seated correctly.
4. Check if anything is blocking the air inlet and filtered air outlets.
5. Inspect the condition of the filters and replace if necessary.
6. Remove any plastic wrapping or packaging from the filters.
7. Ensure all parts are firmly positioned in place.
8. Open the air inlet grill and remove any plastic packaging from the filters, if applicable.
9. Press and hold the Filter Reset Button for 3 seconds under power on condition. The indicator light will blink three times and turn off.

Getting to Know Your Air Purifier
The air purifier comes with the following features:

• Optional Ionizer: The ionizer releases positively charged particles to capture larger particles such as dust, pollen, smoke, and pet dander, making them easier to capture by the filter system.
• High, Medium, and Low-Speed Settings: The air purifier can be adjusted to different fan speeds depending on your preference and air quality needs.
• Filter Check Indicator: The indicator alerts you when the filters need to be checked or replaced.

Cleaning and Maintenance
To ensure optimal performance, follow these cleaning and maintenance instructions:

1. Regularly check the filter condition and replace if necessary.
2. Clean the exterior of the air purifier with a soft, dry cloth.
3. Avoid using water or liquid cleaners on the unit.

FAQ

• Q: What is the warranty period for this air purifier?
  A: The air purifier comes with a 3-year limited warranty.

• Q: Can I use this air purifier outdoors?
  A: No, the air purifier is not designed for outdoor use.

• Q: How often should I check and replace the filters?
  A: It is recommended to check the filters regularly and replace them if necessary. The frequency of filter replacement may vary depending on usage and air quality conditions. Refer to the back panel or user manual for other filter options and replacement recommendations.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. These precautions include:

1. Read all instructions before using the appliance.
2. To avoid fire or shock hazards, plug the appliance directly into a 120V AC electrical outlet.
3. If the filter is covered by a bag when shipped, remove the plastic bag before use.
4. Keep the cord out of heavy traffic areas. To avoid fire hazards, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters.
5. To protect against electrical hazards, DO NOT immerse the appliance in water or other liquids. Do not use near water.
6. Close supervision is necessary when any appliance is used by or near children, or disabled persons.
7. Always unplug the air purifier before moving or cleaning the unit, opening the grill, changing the filters, and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord.
8. NEVER drop or insert any objects into the openings of the unit.
9. DO NOT operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged in any manner, return the appliance to the manufacturer for examination and/or repair.
10. Use appliances only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by Jarden Consumer Solutions may cause hazards.
11. DO NOT use outdoors.
12. NEVER place on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grills.
13. Keep unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user-serviceable parts. All servicing should be performed by Jarden Consumer Solutions or an authorized Jarden Consumer Solutions Center.
15. DO NOT place anything on top of the unit.
16. NEVER use detergents, gasoline, glass purifiers, furniture polish, paint thinner, or other household solvents to clean any part of the appliance.
17. Always turn the appliance off before unplugging it.
18. The ionizer in this appliance produces less ozone than the UL established limits of 50ppb (parts per billion). However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well-ventilated areas with the fan on.
19. This appliance should only be used in a room with temperatures between 40° F and 110° F.
20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this appliance with any solid-state speed control device.

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

FEATURES

CORD SAFETY

• The length of cord used on this appliance was selected to reduce tangling or tripping hazards.
• If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the electrical rating of the air purifier (see the rating label marked on the bottom of the product).
• Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.

GET TO KNOW YOUR AIR PURIFIER

This unit is compatible with all Aer1® Filters. This allows you to choose the filter that is just right for you. Below is information on each filter:

• TOTAL AIR – Advanced Dust Eliminating Technology
• ODOR ELIMINATOR – 10x the odor-fighting power
• ALLERGEN REMOVER – True HEPA technology improves air quality for allergy sufferers
• ALLERGEN PERFORMANCEPLUS – True HEPA technology improves air quality for allergy sufferers.
• SMOKE GRABBER – 99% effective at removing smoke from the air steam (*as small as 0.3 microns from air passing through the filter)

IONIZER
This appliance has an optional ionizer feature which, when turned on, releases negative ions into outgoing filtered air to help the air purification process.

What Are Ions?
Ions are tiny particles that carry a positive or negative charge. They exist naturally around us: in the air, water, and ground. Both positive and negative ions are colorless, odorless, and harmless.

How Does The Ionizer Work?
Negative ions help air purification by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles. These larger particles are then more easily captured by the filter system.

Important Notes:
Your ionizer may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged.  After extended use, you may notice dust around the grills or front panel. This is caused by negative ions exiting the air outlet, evidence of the ionizer’s air cleaning effectiveness. You can remove the dust with a soft brush or a clean,  damp cloth. Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors.

• This may occur more frequently when the filter is nearing the end of its usable product life and is unable to capture as many charged particles.
• Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the filter and interfere with the ionization process.

To help prevent particles from attracting to surfaces throughout your home:

• You may want to run the ionizer less often.
• Check the condition of the filter(s) more frequently. CAUTION: The ionizer in this appliance produces less ozone than the UL-established limits of 50 ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well-ventilated areas with the air purifier fan on.

HIGH, MEDIUM AND LOW SPEED SETTINGS
For optimum air filtration, operate your Holmes® air purifier continuously on the MEDIUM (2) setting. Its rugged motor has been designed to give many years of use. For quieter operation (such as in a bedroom), select the LOW (1) setting. When high levels of air pollution are present, select the HIGH (3) setting to quickly circulate and filter the room air.

FEATURES – OPERATIONS CLEANING/MAINTENANCE

FILTER CHECK INDICATOR
Your Holmes® Air Purifier includes Aer1® Total-Air Filter(s), specially designed to deliver cleaner air allowing you to dust less often! The Aer1® Total-Air filter(s) last 4 months. See back panel for other filter options.
The Filter Check Indicator light is designed to remind you to check and change your filter(s) every 4 months. To reset the Filter Check Indicator, press and hold the button for 3 seconds under working mode. The Indicator light will blink 3 times and turn off.

BEFORE USE

1. Carefully unpack your Air Purifier. Select a firm-level place where there are no obstructions to the air inlet or filtered air outlet.
2. Remove the air inlet grill and check if the filter is covered by a plastic bag. If it is, remove the plastic bag before use and place the filters into the unit. Reinstall the air inlet grill.
3. DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL.

OPERATING INSTRUCTIONS

1. Plug into a 120V AC electrical outlet.
2. Select the desired operating speed; HI (3), MEDIUM (2), LOW (1), by turning Speed Control Knob to the appropriate setting. For optimum air filtration, it is recommended to operate the air purifier continuously. Its rugged motor has been designed to give many years of use.
   NOTE : The Filter Check Indicator light will blink 3 times to indicate that the feature has been activated. To release negative ions into the filtered air, press the ionizer button ( ) to ON and the outer ring of the button will illuminate in blue.
   NOTE : The ionizer will not work unless the unit is running.

CLEANING/MAINTENANCE INSTRUCTIONS

1. Turn the air purifier off and unplug it before cleaning.
   • A. Control Panel
   • B. Speed Control Knob
   • C. Filter Reset Button
   • D. Filter Check Indicator Light
   • E. Ionizer Button
   • F. Filtered Air Outlet
   • G. Aer1® Filter(s)
   • H. Washable Foam Pre-Filter
   • I. Air Inlet Grill
2. The outside of the air purifier can be cleaned with a soft, clean damp cloth.
3. The air inlet grill (reference Fig. 1) can be removed and washed in warm soapy water (not dishwasher safe). Dry before replacing in the unit.
4. The filtered air outlet can be cleaned of dust with a small, soft brush.
5. If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down. WARNING: Do not allow moisture to come in contact with the main housing of the air purifier.

FILTER REPLACEMENT

FILTER REPLACEMENT INSTRUCTIONS
IMPORTANT:

• DO NOT attempt to wash and re-use the Aer1® Filters.
• If the filters are enclosed in plastic bags, remove them before use.

NOTE:
Every few weeks, check the condition of the filter(s). Filter life will vary, depending on air quality and usage (see below). Under normal conditions of continuous use, the Aer1® Total Air, Odor and Smoke Filter will last 4 months while the Allergen Filter will last 12 months.
After approximately 4 months of operation, the Filter Check Indicator will light up to alert you to service the filters.

• Filters with a 4-month filter life: This Filter Check indicator is to remind you to wash the foam pre-filter and replace the Aer1® filter(s).
• Filters with a 12-month filter life: This Filter Check indicator is to remind you to wash the foam pre-filter and check the condition of your Aer1® filter(s).

To replace your filter(s):

1. Turn off and unplug the air purifier.
2. Open the air inlet grill and examine the black foam prefilter. Remove any dust or lint and wash in warm soapy water. Rinse, drip dry, and place back into grill inlet.
3. Remove the used Aer1® filter(s) from the unit by pulling it gently towards you and discarding it. DO NOT attempt to clean the Aer1® filter.
4. Install the new Aer1® filter(s) into the unit. This model utilizes a hang tab and filter clips to ensure that the filter is properly in place. Before replacing the filter, make sure that the hang tab is securely in place. The clip can only be attached to the tabs on the filter one way. The filter clip should easily Fig. 2 slide onto the filter hang tab with only a small amount of pressure. DO NOT use force while attaching the clip to the filter. (Fig. 2)
5. Align the clip on the side of the Aer1® filter with rails on the inside of the purifier unit. Gently slide the filter onto the rail. (Fig. 3)
6. Replace the air inlet grill.
7. To reset the Filter Check Indicator, press and hold the button for 3 seconds under working mode when the unit is powered on. The Indicator light will blink 3 times turn off, and reset the Filter Check timer.

NOTE : Every time you power on the air purifier by selecting any speed setting, the Filter Check Indicator light will blink 3 times. This routine test checks the current usage of the filter(s). If the filter timer has not reached the filter life, the indicator light will go off. If not, the indicator will remain lit until filter(s) have been replaced and Filter Check Indicator ( ) has been reset (see instructions above).

Filters can be purchased at a retailer near you, online at www.aer1filters.com, or by calling (855) Try- aer1.

Air Purifier Model Number| Filter Quantity Needed| Compatible with all filter models below| Filter Description
---|---|---|---
HAP9242/ HAP9414|

1

| HAPF30AT HAPF30AO HAPF30AS| Aer1® Total Air Filter Aer1® Odor Filter

Aer1® Smoke Grabber Filter

 |

HAP9422

|

2

| HAPF300AH

HAPF300AP (D filter)

| Aer1® Allergen Remover Filter Aer1® Allergen PerformancePlus “D” Filter
 |  | HAPF30 (A filter)| Holmes® “A” Filter

TROUBLESHOOTING

TROUBLESHOOTING

Problem| Solution
•      Unit will not operate.|   Check if the unit is properly plugged in and the outlet is energized.

Make sure the unit is turned ON.

Make sure filters are properly installed and the rear grill is seated correctly.

•      Decreased airflow.|   Make sure nothing is blocking air inlet and filtered air outlets.

Check the condition of the filters and replace if necessary.

Check filters to remove any plastic wrapping/packaging.

•      Excessive Noise.|   Make sure parts are firmly positioned in place.

Open the air inlet grill, and make sure that any plastic packaging was removed from the filters, if applicable.

•      The filter check indicator will not reset.|   Check the condition of the filters and replace if necessary.

Press and hold the Filter Reset Button for 3 seconds under power on condition. The indicator light will blink three times and turn off.

LEARNING MORE
For a wealth of information about your air purifier and other Holmes® products, visit our website at www.holmesproducts.com or call 1-800-546-5637.

AER1 FILTER SERIES ®

Congratulations! Your new air purifier is equipped with the new and improved Aer1® Total Air Filter(s).

UNIT

MES          Total Air TH

| 99% HEPA-Type technology.

Infused with Arm & Hammer® baking soda.

| Ideal for dust reduction.

Delivers 30% better air quality.

Odor Eliminator

| 10 times the odor-fighting power. Contains Arm & Hammer® baking soda, carbon, and zeolite for odor control.| Ideal for eliminating odors from pets, tobacco smoke, and cooking fumes.

Allergen Remover

| 99.97% True HEPA technology.

Removes up to 99.97% of particles passing through the filter such as pollen, dust, mold, and dander.

| ****

Ideal for allergy sufferers.

Allergen performance plus

| 99.99% True HEPA technology.

Helps remove up to 99.99% of particles passing though the filter such as pollen, dust, mold, and dander.

| ****

Ideal for allergy sufferers.

Smoke Grabber

| HEPA-type filtration.

Triple layer protection specially formulated with Arm & Hammer® Baking Soda, Carbon and Zeolite.

Remove up to 99% of smoke and pollutants from the air stream.

| ****

Ideal for reducing smoke and odors from smoke and VOCs.

© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved.
Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431. The ARM & HAMMER® name, logo and associated marks are trademarks of Church & Dwight Co., Inc. and are used under license by Sunbeam Products, Inc.

WARRANTY INFORMATION

3-YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for three years from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, a replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser from the date of the initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or in any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes, and tornadoes.

What are the limits on JCS’s Liability?

• JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied, or statutory warranty or condition.
• Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.
• JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.
• JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against the purchaser by any other party.
• Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.
• This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service
In the U.S.A.
If you have any questions regarding this warranty or would like to obtain warranty service, please call
1-800-546-5637 and a convenient service center address will be provided to you.

In Canada
If you have any questions regarding this warranty or would like to obtain warranty service, please call
1-800-546-5637 and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y OM1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR THE PLACE OF PURCHASE.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>