My Animal Command MACNV750 Full Color Night Vision User Manual

My Animal Command MACNV750 Full Color Night Vision

Product Information

• Specifications:
  • Model   No: MACNV750
  • Power Supply: Built-in 5000mAh lithium battery
  • Battery   Life: Up to 5 hours in night mode
  • SD Card Support: Up to 128GB

Product Usage Instructions

• Powering On/Off:

  • To power on/off the night vision device, press and hold the Power Button.

• Adjusting IR and Zoom:

  • Use the IR UP/Zoom In/UP Button to increase IR intensity or zoom in, and the IR Down/Zoom Out/Down Button to decrease IR intensity or zoom out.

• Navigating Menu:

  • Press the Mode Button to access different settings and use the Menu/Return Button to navigate through options. Press the OK/Shot Button to confirm selections.

• Viewing and Recording:

  • Utilize the 3.0-inch LCD Screen for viewing. Adjust settings such as Screen Brightness, Video Resolution, Image Size, and more using the MENU Function.

• Charging the Device:

  • Connect the USB charging cable to the USB Port for charging. Leave the unit on charge for approximately 6-8 hours for a full charge.

• Inserting/Removing SD Card:

  • To insert, push the micro-SD card into the slot until it locks. To remove it, push the card inward to release it. Remember to use up to a 128GB SD Card.

Introduction

• Congratulations and thank you for purchasing our product, the full-color night vision.
• This manual will help you optimize your viewing experience by explaining how to utilize the binoculars controls and features, and how to care of the item.
• Read these instructions carefully and fully before using your night vision.
• The night vision can be used day and night. The IR (Infra-Red) light is not turned on during the day, and the pictures or videos are displayed in colour, but this full-color night vision can be used at night in colour too, and Color Night Viewing needs some sort of light or low light conditions such as Moonlight/Starlight or other light sources such as street lamps etc.…. In low light conditions or even complete darkness, turn on the IR light to see your surroundings. Please note in IR Mode you will not see color but Monochrome only. You can also take photos and videos, which will be stored on the included 64GB micro-SD card and then you can download them to a PC/SD Card viewer. Please note this unit can handle up to Max size of 128GB SD Cards
• Download them to your computer using a card reader or USB cable.
• Please note that only connect via USB Cable to Windows/Mac PCs. For some Mac users, please remove the SD Card and use the SD card in the MAC PC directly or with an appropriate SD Card reader connected to the MAC PC
• Note: To see the image display more clearly, please keep a certain distance between your eyes and the eyepiece/display during use, do not come close.
  • We are always happy to help so Make contact with us with contact details in this manual for any help or support you may need!

Product Overview

1. Power Button
2. IR UP/Zoom In/UP Button
3. IR Down/Zoom Out/ Down Button
4. Mode Button
5. Menu/Return Button
6. OK/Shot Button
7. 3.0 Inch LCD Screen
8. IR light
9. Lens
10. USB Port
11. SD Card Slot
12. Manual Focus Wheel

MENU Function

LCD Display Information

Power Supply

• The Night Vision has a built-in 5000mAh lithium battery, which can be used for up to 5 hours in night mode.
• Equipped with a display USB charging cable, you can directly observe whether the Battery indicator is fully charged.
• (When the product is turned on, the indicator light is always blue; the indicator light is red when charging; the indicator light is off when fully charged.)
• As a matter of Procedure, we always recommend that you leave the unit on Charge for a Continuous Charge of approx. 6-8 Hours at a time and ignore the Charging light indicator so you know for sure the unit is fully charged Red light is charging.

Inserting / Removing the SD card

1. Insert the micro-SD card into the card port and push until it locks in place.
2. To remove the installed micro-SD card, please push the card inward and it will come up.

Tip: It is recommended to use a micro-SD card Max size The unit Can support up to Max size 128GB SD Cards only.

Format the SD Card

• Always when using a new SD Card make sure to format the SD Card within the Night vision before using.
• The SD Card that comes with the unit is formatted at the factory so you can begin using it straight away.

Turn On/OFF

1. Hold the button for 3-5 seconds to turn on/off the night vision.
   • Note: Please turn off the device before charging.

Adjustment Mode

Night vision has 3 modes and you can switch between them by pressing the button

Note: In Video Mode, short press the button, and it can turn on the PIP function. Turn off PIP when you short-press the on/off button again.

Photo Mode

1. The unit will always default to video mode when it powers on, please press the button to switch to photo mode, the icon will appear in the top left corner of the screen.
2. Press the button to take a picture.
3. The default is 8MP, if you need to choose a higher pixel photo, please press the button to enter the menu and select the MP size you require for photos (up to 60 MP)

Video Mode

1. The unit will always default to video mode when it powers on, if it’s not in video mode, please press the button and select the video mode, the icon will appear in the top left corner of the screen.
2. Press the button to start recording the video and press the button again to stop recording.
3. In Video Mode, short press the button, which opens up the PIP function, Press the same button to turn off PIP mode.

Playback Mode

1. Watching stored videos and photos: press the button and select playback mode. You may toggle through your saved photos or videos with and buttons.
2. Deleting stored videos and photos: in playback mode, please press the button, you can use the or button to select to delete/protect the image you are viewing from the micro-SD card, then press button to delete/protect the image.

Full Color Mode and IR (Infra-Red) Monochrome Mode

1. In low light conditions including moonlight/starlight, you can use the full-colour function of night vision, to see and take footage in colour. In This Mode, you do not need to turn on the IR Light and use the night vision in colour mode during the night.
2. In total darkness, you cannot use the full-color function, please short press the button to turn on the IR light, and the night vision operates in monochrome (Black and white mode) and will also take videos and photos in monochrome as well if IR is activated. Short Press the button each time to toggle through the 7 levels of IR mode and to return to colour mode.

Quick Start

1. Insert Micro SD card（Max Size SD Card it supports is 128GB）， Long press key to 3-5s， and the indicator light will show blue, and the device will power on，after powering on， adjust the object clearly through the focus wheel， and press key， manual take photo or video record， and long press key to shutdown

2. Press key， set work mode（photo， video， playback），on the playback mode， press key to playback， and press key again， to exit playback

3. Press key， enter to menu setting parameters，press or up or down key to select， and press key to confirm， after settings，press key again to back and exit the menu

4. Short press key to Enable IR LED， press it again to add one level until 7 Levels (Max)， short press key to reduce one level until 0 level (Minimum) which disables the IR LED

5. Long press key， zoom in， Max 5.9X， long press key， Zoom out， Mini 0X， for the objects of long-range or near range， zoom in or out first, and adjust with the focus wheel to get the objects clear，press key to take a photo or video record and save SD
   card

   • Note： if IR LED status i.e. enabled， you cannot zoom in or out， and you will need to close/Disable IR LED first to use digital zoom

6. Long press key 3-5s to shutdown， takeout SD card after shutdown， read the data files with a card reader or connect a USB cable to PC

7. Charging， the indicator light shows red, and connect it to a DC 5V adapter or Power Bank with a USB cable; the indicator light goes out when fully charged.

   • Note: Wall USB adapter is included, always use standard USB power (DC 5V) with a minimum of 1A (5 Watts) of power to avoid damaging the battery as much as possible.

Product Parameters

Download Files to the PC

There are two ways to download images from the night vision memory cards to on computer.

1. Use SD card reader
   • Pop up and take the SD card from the machine and insert into any standard Micro SD card reader or to SD Card slot on your computer.
   • Open my computer, double-click the removable disk
   • Copy the files from the memory card to the computer
   • Tip: The card reader is not included.
2. Connect the night vision to PC by USB cable
   • Turn on the night vision, and connect it to PC by USB cable
   • Tip: Support Windows and MAC PC’s (May not support some or older MAC PC’s)
   • “Mass Storage” will appear on the screen
   • Open my computer, double-click the removable disk
   • Copy the files from the memory card to the computer

FAQs

What should I do if I can’t boot up?

Please charge the night vision first for a Minimum of 6-8 Hours continuous Charge, connect the USB to a DC 5V or power bank by USB cable, and try to turn it on.

What should I do if the screen display is abnormal?

You can shut down first, then restart.

What should I do if I cannot connect to the computer via USB cable?

Please check whether the USB cable is good, whether the interface is inserted in place, whether the computer USB interface is good, etc.

What should I do if the device cannot read the memory card?

Please check whether the memory card is inserted into the device correctly and whether the quality of the memory card is good, the maximum is 128GB (it is recommended to format the memory card before using it), or please replace other types of memory card. Make sure the SD Card is not locked.

How to adjust the date and time?

Press the MENU button, enter the menu to select the date/time via the Up and Down button, and set the date and time to the current.

• How to disable the sound of the device?
  • Press the MENU button, and enter the menu to select the Key Tone via the Up and Down button, and select Off.
• How to turn off or on the IR light?
  • Adjust the IR level by shortly pressing or button, IR+ turns on the IR light and upshift, and IR- is down shift and turns off the IR light.
• How to zoom in or out?
  • Long press to zoom in, long press to zoom out.
• What if the screen suddenly freezes after startup or during use?
  • Press the MENU+MODE button at the same time to reset.
• How to open the PIP (picture in picture) function?
  • In video mode and power on, short press the button to turn off or on PIP.
• When to use the full-color mode?
  • In low light conditions, turn on the machine, aim the device at the target object, and adjust the lens until the target object is clear, and the object is in colour.

Tips & Warnings

1. The device cannot be activated or turned on.
   • Please charge the device first, connect the USB to DC 5V with a Minimum of 1A adapter or a power bank, and try it to turn on.
2. Focusing the image
   • Target the object you would like to view and turn the object focusing wheel until the image on the screen becomes sharp and clear.
3. Cleaning the night vision
   • Before cleaning the machine, disconnect the power and clean the outside of the machine with a dry dustless cloth. To avoid damage to the machine, do not use any cleaning fluids, to clean the eyepiece or lens, just use a cleaning cloth gently to wipe away dust. Always protect the lens from scratching. Protect the machine from dust and moisture, and store it in a bag or box.
4. About the adapter
   • The adapter is included, Specifications of the adapter DC 5V 2A.
5. Can work through Windows?
   • Whether or not the IR light is turned on, the device cannot observe objects through window glass.
6. Can it work in water?
   • Do not use the night vision in water as it will damage the device and the damage will not be covered by the warranty. The unit is not IP waterproof rated so protect the unit during rainfall or wet conditions Please make contact with us at our contact details below for any Help or advice you may need.

CONTACT

• www.myanimalcommand.com.
• Email: -sales@myanimalcommand.com.
• Tel USA: – 888 686 6495
• Tel Australia: – 1300 416 703
• Tel UK: – 020 3936 1156
• Model No: – MACNV750
• www.myanimalcommand.com.
• Email: -sales@myanimalcommand.com.
• Tel USA: – 888 686 6495
• Tel Australia: – 1300 416 703
• Tel UK: – 020 3936 1156

References

• Dog Training, Animals Grooming Products - My Pet Command

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>