MY ANIMAL COMMAND MAC600 Professional Brushless Motor Electric Livestock Shear Clippers User Manual

MY ANIMAL COMMAND MAC600 Professional Brushless Motor Electric Livestock

Shear Clippers

Product Information

• Product Name: My Animal Command Professional Brushless Motor Electric Livestock Shear Clippers
• Model Number: MAC600
• Power: 126W
• Input: AC100-240V, 50/60Hz
• Output: 36V, 3.5A
• Sound Level: 65-70db
• Advantage: Light weight, super powerful, 65MM wide blades. Blades not easy to get hot.

Product Usage Instructions

Safety Instructions

1. Check the circuit and make sure the power cord is not damaged or broken, and ensure that the voltage used is consistent with the one declared on the machine.
2. Before start-up, make sure that the switch of the machine is set to the OFF position.
3. Animal shearing should be carried out in a dry environment, and make sure that the machine is operated safely.

Structure

The clippers have a titanium steel blade and an ON/OFF switch.

Accessories

• Power plug
• Blade
• Oil
• Cleaning brush

Introduction

The My Animal Command MAC600 Professional Brushless Motor Electric Livestock Shear Clippers are powerful yet light and easy to handle clippers designed for all kinds of livestock animals. They can be used for sheep, horses, goats, pigs, cattle, alpacas, llamas, and even big and XL dogs and pets.

CAUTIONS:

1. Do not use thinner or alcohol on the clippers.
2. Avoid exposing the clippers to gas.

How to Hold and Clip with the MAC 600 Clippers

Step 1: Hold the clipper like you would hold a pen, keeping it at a 45-degree angle to the horizontal. Remember to oil the blade regularly.

Step 2: For sheep shearing, it may be useful to dip the blade into soap water and oil every 2 minutes to prevent wool from getting caught up in the blade. It is recommended to use half of the length of the blade for shearing sheep.

Step 3: Start shaving from the leg or head area of the animal. Shave in a straight line and then continue shaving along and above and below the original shave line.

Note: Step 3 is specifically for sheep, goats, alpacas, and similar animals. Different techniques may be used for horses, cows, pigs, and large dogs.

Blades Detachment

1. Push forward the blade teeth with your thumbs.
2. Hold and catch the blade with one hand to avoid falling and damage.

Blades Installation

1. Align the convex part of the blade with the clipper base groove position.
2. Line up the two sides of the blade plastic clips with the two metal brackets on the clipper base.

FAQ

Q: Will the product get hot during use?

A: Yes, the product may slightly get hot during use or charging, which is normal.

MODEL: MAC600

ATTENTION
Do not dip in water directly when the electric shear is working. Remove the blade when it needs cleaning.

www.myanimalcommand.com
Email: –[email protected]
Tel USA: – 888 686 6495
Tel Australia: – 1300 416 703
Tel UK: – 020 3936 1156

PROFESSIONAL ELECTRIC LIVESTOCK SHEAR CLIPPERS
Congratulations on Purchasing the My Animal Command MAC600 Professional Brushless Motor Electric Livestock Shear Clippers.

SAFETY INSTRUCTIONS

Before use, please read the following Safety Instructions in preparation before using these clippers:

1. Check the circuit and make sure the power cord is not damaged or broken, and ensure that the voltage used is consistent with the one declared on the machine.
2. Before start-up, make sure that the switch of the machine is set to the OFF position.
3. animal shearing should be carried out in a dry environment, and make sure that the machine is operating with the power supply away from damp and wet places in order to avoid short circuit or open circuits which put the machine in danger and can damage the machine. Animal shearing in the open air on a raining day is forbidden. Moreover, it is noted not to allow oil or water into the actual machine.
4. Animal shearing work must be completed at the designated site. Keep bystanders and kids away from the working site to prevent the occurrence of any accident.
5. Animal shearing should be done only by experienced workers or under professional instruction, as it may cause injury to Animals.
6. Don’t touch the head of the machine with any part of your body when it is running, as it may cause injury to you, and keep the head away from hard objects to avoid damage.
7. Shut down the machine when the work is stopped, unplug the cable from the power and pack them in the plastic box. It’s not recommended to leave the machine and its accessories lying about.
8. This machine is only intended to be used for Animal shearing or other similar livestock/Pet type animals. Hair-cutting on humans or fur-cutting on animals other than Livestock Animals or Pets is not allowed.
9. If the machine stops or does not work, turn off the switch first on the machine and then pull out of the power cord.
10. When inspection or maintenance is needed, turn off the machine switch and pull out the power cord before such work has commenced.
11. Keep away from Children.

PRODUCT PARAMETERS

• Product Name: Professional Brushless Motor Electric Livestock Shear Clippers
• Model Number: MAC600
• Power: 126W
• Input: AC100-240V,50/60Hz
• Output: 36V,3.5A
• Sound Level: 65-70db
• Advantage: Light weight,super powerful,65MM wide blades. Blades not easy to get hot

STRUCTURE

ACCESSORIES

INTRODUCTION

These are a powerful yet light and easy to handle clippers made to be used for all kinds of Livestock Animals Shear and clipping applications which includes, Sheep, Horses, Goats, Pigs, Cattle, Alpacas, Llamas and can also be used with big and XL Dogs and Pets.

• This Clipper Has been designed to have a comfortable and easy clipping experience with a unique ergonomic light weight design and shape. Combined with a powerful 126W 36VDC Brushless Motor deliver powerful Torque to the blade which will allow to Its cut through the some of the ticker coats without the blades getting stuck.

• Our Unique Patented Blade technology provides you with a wide 65MM length Blade which leaves a 1.5mm Hair Length on your Animals. Blades are 33 Fine Tooth Made of Ceramic and Titanium materials
  and coated with titanium coating providing you with superb cutting without Blades getting Hot and operating at 7500 SPM.

• Please Make sure your clean and oil the Blade regularly for Optimum performance and longevity. Use Standard Clipper oil as provided in the Kit and additional Oil and Blade kit can be purchased from My Animal command.

• Please Note there is Only 1 Type of Blade type that can fit onto this Machine. With Purchase of your Kit, we have provided an additional spare blade for you. You Can also purchase additional spare Blades from us so check our website or Search My Animal Command MAC600 extra Blades.

CAUTIONS

1. Please don’t disassemble the product by yourself.
2. Please do not clean the product with water and don’t keep it in wet place.
3. The product can only be cleaned with cloth dipping with water or neutral soap solution.
4. Do not charge the product in the heat source above 40℃ and the environment below 0℃.

• The product will slightly get hot during use or charging, which is not abnormal.

HOW TO HOLD AND CLIP WITH THE MAC 600 CLIPPERS

Step 1. Please hold the clipper like you would be holding a pen and the clipper should be kept around 45 degrees to horizontal as shown below. Always Oil the Blade regularly.

Step 2. For Sheep Shearing it might be useful to dip the blade into soap water and oil every 2 minutes due to the greasiness of some wool and not for the wool to get caught up in the blade. For Sheep Shearing we suggest to use half of the length of blade for shearing as shown below and not the entire length of blade.

Step 3. A Good technique is to start to shave from the leg of sheep or a goat, or from the head area. Firstly, we shave out in a straight line, then you can continue to shave the sheep or Goat body along and above and below the original shave line which may help allot.
Please note Step 3 is specifically for sheep, goats, alpacas and for other livestock animals like horses, Cows, pigs etc.… For Large size dogs, you don’t have to shave it like the method as shown above.

BLADES DETACHMENT

1. Push forward the blade teeth with your thumbs ,as shown in step 1-3.
2. One hand hold and catch the blade to avoid falling and damage,as shown in step 3-4.

BLADES INSTALLATION

1. Align the convex part of the Blade fits with the clipper base Groove position, as shown in step 1.
2. Line up the two sides of blade plastic clips to the 2 Metal Brackets on the clipper base,as shown in step 2-3.
3. Push the blade firmly,as shown in step 4. Done.

BLADES MAINTAIN & CLEANING

1. Wool hair may accumulate in the blades teeth and the moving blade shell. Please clean the wool hair with the cleaning brush provided, as shown in pic. 1-2
2. After cleaning the blade, always apply 1-2 drops of oil as shown in pic. 3.
3. Blades should be oiled before,during and after each use.
   Attention: Please do not disassemble the blades structure and spring, it may cause trouble.

WARRANTY CARD

We offer 1 Year warranty on the clipper machine. Normal wear and tear for Blades are not covered under warranty. Contact My Animal command for any warranty claims.

www.myanimalcommand.com
Email: –[email protected]
Tel USA: – 888 686 6495
Tel Australia: – 1300 416 703
Tel UK: – 020 3936 1156

References

• Dog Training, Animals Grooming Products - My Pet Command

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>