FSi XMP310 31.5 In Reference Monitor Announced User Guide
- June 1, 2024
- FSi
Table of Contents
Flanders Scientific Inc.
XMP310 Quick Start Guide – FW.2.4.41
This quick start guide is based on firmware version 2.4.41. Please visit https://flandersscientific.com/firmware/ if you would like to check for potential firmware updates.
The full user manual can be found at https://flandersscientific.com/support/manuals.php
Color System
Your monitor has arrived fully calibrated. Please leave the Color System
option found in the Color menu set to GaiaColor to access the calibrated
positions. The None option disables calibration and the 3rd Party
option is an empty and uncalibrated set of memory slots available for use with
3rd party applications.
Within the GaiaColor Color System you will find all the available Gamut, EOTF, Correlated Color Temperature, and Luminance options supported by the monitor. Any selection made within the GaiaColor mode activates a calibrated monitor state instantaneously, without having to re-profile the display, based on the last direct connect volumetric AutoCal profile data saved to the monitor’s non-volatile memory.
Connectivity
The preferred configuration is single link 12Gbps or 6Gbps SDI. Quad Link
3Gbps and 1.5Gbps Square Division signals are also supported, but must be
manually selected from the Video Menu.
FW 2.4.41 Known Issues List
We are aware of the bugs below and are working on addressing them in future
releases, but if you note any issues / bugs not listed here please report them
to Support@FlandersScientific.com
Panel Dimming -> ON is currently disabled. The monitor only works in the reference Panel Dimming -> OFF mode at present. Panel dimming will be enabled as an optional toggle in a future release.
1280x720p is not currently supported. This will be addressed in a future release.
The processed MON OUT SDI (downconvert) capability may require you to select the desired setting from the menu (e.g. 6G IN – HD OUT) and then reboot the monitor with that matching SDI IN format signal connected in order to properly activate that functionality. This bug does not impact the clean loop throughs, only the processed MON OUT SDI feature.
For further support please contact Support@FlandersScientific.com or +1.678.835.4934
© 2024 Flanders Scientific, Inc.