FSI XMP QD OLED HDR Mastering Monitor User Guide
- June 1, 2024
- FSi
Table of Contents
USER MANUAL FPSD SERIES
XMP Quick Start Guide
– FW.2.4.41
XMP QD OLED HDR Mastering Monitor
This quick start guide is based on firmware version 2.4.41. Please visit https://flandersscientific.com/firmware/ if you would like to check for potential firmware updates.
The full user manual can be found at https://flandersscientific.com/support/manuals.php
Color System
Your monitor has arrived fully calibrated. Please leave the Color System
option found in the Color menu set to GaiaColor to access the calibrated
positions. The None option disables calibration and the 3rd Party option is an
empty and uncalibrated set of memory slots available for use with 3rd party
applications.
Within the GaiaColor Color System you will find all the available Gamut, EOTF, Correlated Color Temperature, and Luminance options supported by the monitor. Any selection made within the GaiaColor mode activates calibrated monitor state instantaneously, without having to re-profile the display, based on the last direct connect volumetric AutoCal profile data saved to the monitor’s non-volatile memory.
Connectivity
The preferred configuration is single link 12Gbps or 6Gbps SDI. Quad Link
3Gbps and 1.5Gbps Square Division signals are also supported, but must be
manually selected from the Video Menu.
FW 2.4.41 Known Issues List
We are aware of the nuisance items below and are working on addressing them in
future releases, but if you note any issues / bugs not listed here please
report them to
Support@FlandersScientific.com
Panel Dimming -> ON is currently disabled. The monitor only works in the
reference Panel Dimming -> OFF mode at present. Panel dimming will be enabled
as an optional toggle in a future release.
The processed MON OUT SDI (downconvert) capability may require you to select
the desired setting from the menu (e.g. 6G IN – HD OUT) and then reboot the
monitor with that matching SDI IN format signal connected in order to properly
activate that functionality. This bug does not impact the clean loop
throughs, only the processed MON OUT SDI feature.
For further support please contact Support@FlandersScientific.com or +1.678.835.4934
© 2024 Flanders Scientific, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>