FSi XMP310 31.5 Inch UHD Resolution HDR Monitor User Guide
- June 1, 2024
- FSi
Table of Contents
FSi XMP310 31.5 Inch UHD Resolution HDR Monitor
Product Information
Specifications:
- Model: XMP310
- Firmware Version: 2.4.40
- Color System: GaiaColor, None, 3rd Party
- Connectivity: Single link 12Gbps or 6Gbps SDI, Quad Link 3Gbps, 1.5Gbps Square Division
Product Usage Instructions
Color System Settings:
Your monitor comes fully calibrated with the Color System set to GaiaColor by
default. This provides access to calibrated positions. Selecting None disables
calibration, while 3rd Party offers uncalibrated memory slots for use with
third-party applications.
GaiaColor Mode:
Within GaiaColor mode, you can adjust Gamut, EOTF, Correlated Color
Temperature, and Luminance options. Any changes made here activate a
calibrated state instantly based on the last AutoCal profile data saved in the
monitor’s memory.
Connectivity Options:
The recommended connection is single-link 12Gbps or 6Gbps SDI. Quad Link 3Gbps
and 1.5Gbps Square Division signals are also supported but need manual
selection from the Video Menu.
FAQ
Known Issues (FW 2.4.40):
- Panel Dimming: ON mode is disabled; only OFF mode works currently.
- Resolution Issue: 1280x720p is not supported in this version but will be in future updates.
Contact Support:
If you encounter any issues or need further assistance, please reach out to
Support@FlandersScientific.com or
call +1.678.835.4934.
INFORMATION
This quick start guide is based on firmware version 2.4.40. Please visit https://flandersscientific.com/firmware/ if you would like to check for potential firmware updates.
The full user manual can be found at https://flandersscientific.com/support/manuals.php
Color System
Your monitor has arrived fully calibrated. Please leave the Color System option found in the Color menu set to GaiaColor to access the calibrated positions. The None option disables calibration and the 3rd Party option is an empty and uncalibrated set of memory slots available for use with 3rd party applications.
Within the GaiaColor Color System you will find all the available Gamut, EOTF, Correlated Color Temperature, and Luminance options supported by the monitor. Any selection made within the GaiaColor mode activates a calibrated monitor state instantaneously, without having to re-profile the display, based on the last direct connect volumetric AutoCal profile data saved to the monitor’s non-volatile memory
Connectivity
The preferred configuration is single link 12Gbps or 6Gbps SDI. Quad Link 3Gbps and 1.5Gbps Square Division signals are also supported, but must be manually selected from the Video Menu.
Issues List
FW 2.4.40 Known Issues List
We are aware of the bugs below and are working on addressing them in future
releases, but if you note any issues/bugs not listed here please report them
to Support@FlandersScientific.com
Panel Dimming -> ON is currently disabled. The monitor only works in the
reference Panel Dimming -> OFF mode at present. Panel dimming will be enabled
as an optional toggle in a future release.
1280x720p is not currently supported. This will be addressed in a future
release.
For further support please contact
Support@FlandersScientific.com or
+1.678.835.4934
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>