ARRMA ARA4203XV3 4×4 550 MEGA Vehicle User Manual
- June 1, 2024
- ARRMA
Table of Contents
4×4 550 MEGA
GET STARTED!
ARA4203XV3 4×4 550 MEGA Vehicle
WHAT’S INCLUDED?
REQUIRED: 7 Cell NiMH Battery or 2S LiPO 7.4V Battery (IC3 Connector) Suitable Battery Charger 4x AA Batteries
WARNINGS
NOTICE
All instructions, warranties and other collateral documents are subject to
change at the sole discretion of Horizon Hobby, LLC. For up-to-date product
literature, visit www.horizonhobby.com or
www.towerhobbies.com and click on the
support or resources tab for this product.
MEANING OF SPECIAL LANGUAGE
The following terms are used throughout the product literature to indicate
various levels of potential harm when operathis product:
WARNING: Procedures, which if not properly followed, create the
probability of property damage, collateral damage, aserious injury OR create a
high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the
probability of physical property damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility
of physical property damage AND little or no possibility of injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the
features of the product before operating. Failure to operate the product
correctly can result in damage to the product, personal property and cause
serious injury.
This is a sophisticated hobby product and NOT a toy. It must be operated with
caution and common sense and requires some basic mechanical ability. Failure
to operate this product in a safe and responsible manner could result in
injury or damage to the product or other property. This product is not
intended for use by children without direct adult supervision. Do not use with
incompatible components or alter this product in any way outside of the
instructions provided by Horizon Hobby, LLC. This manual contains instructions
for safety, operation and maintenance. It is essential to read and follow all
the instructions and warnings in the manual, prior to assembly, setup or use,
in order to operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
SAFETY PRECAUTIONS AND WARNINGS
As the user of this product, you are solely responsible for operating in a
manner that does not endanger yourself and others or result in damage to the
product or property of others.
This model is controlled by a radio signal subject to interference from many
sources outside your control. This interference can cause momentary loss of
control, so it is advisable to always keep a safe distance in all directions
around your model as this margin will help avoid collisions or injury.
- Never operate your model with low transmitter batteries.
- Always operate your model in open spaces away from full-size vehicles, traffic and people.
- Never operate the model in the street or in populated areas for any reason.
- Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable battery packs, etc.) you use.
- Keep all chemicals, small parts and anything electrical out of the reach of children.Never lick or place any portion of the model in your mouth as it could cause serious injury or even death.
- Exercise caution when using tools and sharp instruments.
- Take care during maintenance as some parts may have sharp edges.
- Immediately after using your model, do NOT touch equipment such as the motor, electronic speed control and battery, because they generate high temperatures. You may burn yourself seriously touching them.
- Do not put fingers or any objects inside rotating and moving parts, as this may cause damage or serious injury.
- Always turn on your transmitter before you turn on the receiver in the car. Always turn off the receiver before turning your transmitter off.
- Keep the wheels of the model off the ground when checking the operation of the radio equipment.
WARNING AGAINST COUNTERFEIT PRODUCTS: Always purchase from a Horizon
Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum
product. Horizon Hobby, LLC disclaims all support and warranty with regards,
but not limited to, compatibility and performance of counterfeit products or
products claiming compatibility with DSM or Spektrum technology.
WATER-RESISTANT VEHICLE WITH WATERPROOF ELECTRONICS
Your new Horizon Hobby vehicle has been designed and built with a
combination of waterproof and water-resistant components to allow you to
operate the product in many “wet conditions,” including puddles, creeks, wet
grass, snow and even rain.
While the entire vehicle is highly water-resistant, it is not completely
waterproof and your vehicle should NOT be treated like a submarine. The
various electronic components used in the vehicle, such as the Electronic
Speed Control (ESC), servo(s) and receiver are waterproof, however, most of
the mechanical components are water-resistant and should not be submerged.
Metal parts, including the bearings, hinge pins, screws and nuts, as well as
the contacts in the electrical cables, will be susceptible to corrosion if
additional maintenance is not performed after running in wet conditions. To
maximize the long-term performance of your vehicle and to keep the warranty
intact, the procedures described in the “Wet Conditions Maintenance” section
below must be performed regularly if you choose to run in wet conditions. If
you are not willing to perform the additional care and maintenance required,
then you should not operate the vehicle in those conditions.
CAUTION: Failure to exercise caution while using this product and
complying with the following precautions could result in product malfunction
and/or void the warranty.
General Precautions
- Read through the wet conditions maintenance procedures and make sure that you have all the tools you will need to properly maintain your vehicle.
- Not all batteries can be used in wet conditions. Consult the battery manufacturer before use. Caution should be taken when using Li-Po batteries in wet conditions.
- Most transmitters are not water-resistant. Consult your transmitter’s manual or the manufacturer before operation.
- Never operate your transmitter or vehicle where lightning may be present.
- Do not operate your vehicle where it could come in contact with salt water (ocean water or water on saltcovered roads), contaminated or polluted water. Salt water is very conductive and highly corrosive, so use caution.
- Even minimal water contact can reduce the life of your motor if it has not been certified as water-resistant or waterproof. If the motor becomes excessively wet, apply very light throttle until the water is mostly removed from the motor. Running a wet motor at high speeds may rapidly damage the motor.
- Driving in wet conditions can reduce the life of the motor. The additional resistance of operating in water causes excess strain. Alter the gear ratio by using a smaller pinion or larger spur gear. This will increase torque (and motor life) when running in mud, deeper puddles, or any wet conditions that will increase the load on the motor for an extended period of time.
Wet Conditions Maintenance
-
Remove the battery pack(s) and dry the contacts. If you have an air compressor or a can of compressed air, blow out any water that may be inside the recessed connector housing.
-
Remove the tires/wheels from the vehicle and gently rinse the mud and dirt off with a garden hose. Avoid rinsing the bearings and transmission.
NOTICE: Never use a pressure washer to clean your vehicle. -
Use an air compressor or a can of compressed air to dry the vehicle and help remove any water that may have gotten into small crevices or corners.
-
Spray the bearings, drive train, fasteners and other metal parts with a water-displacing light oil or lubricant. Do not spray the motor.
-
Let the vehicle air dry before you store it. Water (and oil) may continue to drip for a few hours.
-
Increase the frequency of disassembly, inspection and lubrication of the following:
- Front and rear axle hub assembly bearings.
- All transmission cases, gears and differentials.
- Motor—clean with an aerosol motor cleaner and re-oil the bushings with lightweight motor oil.
-
Drain any water that has collected in the tires by spinning them at high speed. With the body removed, place the vehicle upside down and pull full throttle for a few short bursts until the water has been removed.
NOTICE: This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
BATTERY CHARGER SAFETY PRECAUTIONS AND WARNINGS
DANGER: To reduce the risk of fire or electric shock, carefully follow
these instructions.
WARNING: Before charging, read the instructions. Failure to follow all
instructions many result in excessive heat, FIRE, and ultimately injury and
property damage.
- For indoor use, do not expose to rain.
- Never leave charging batteries unattended. Disconnect charger if batteries become hot or puff.
- Never charge batteries overnight.
- Never leave batteries near fire, water, or in extreme temperatures.
- Never impact or alter the batteries.
- Never leave the charger and battery unattended during use.
- Never attempt to charge dead, damaged or wet battery packs.
- Never attempt to charge a battery pack containing different types of batteries.
- Never allow children under 14 years of age to charge battery packs.
- Never charge batteries in extremely hot or cold places or place in direct sunlight.
- Never charge a battery if the cable has been pinched or shorted.
- Never connect the charger if the power cable has been pinched or shorted.
- Never attempt to dismantle the charger or use a damaged charger.
- Never attach your charger to both an AC and a DC power source at the same time.
- Never connect the input jack (DC input) to AC power.
- Always use only rechargeable batteries designed for use with this type of charger in the correct programming mode.
- Always inspect the battery before charging.
- Always keep the battery away from any material that could be affected by heat.
- Always monitor the charging area and have a fire extinguisher available at all times.
- Always end the charging process if the battery becomes hot to the touch or starts to change form (swell) during the charge process.
- Always connect the charge cable to the charger first, then connect the battery to avoid short circuit between the charge leads. Reverse the sequence when disconnecting.
- Always connect the positive red leads (+) and negative black leads (–) correctly.
- Always disconnect the battery after charging, and let the charger cool between charges.
- Always charge in a well-ventilated area.
- Always terminate all processes and contact Horizon Hobby if the product malfunctions.
- Charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
WARNING: Never leave charger unattended, exceed maximum charge rate,
charge with nonapproved batteries or charge batteries in the wrong
mode.Failure to comply may result in excessive heat, fire and serious injury.
CAUTION: Use only with compatible batteries in the correct program mode.
Not doing so can result in excessive heat and other related product
malfunctions, which can lead to user injury or property damage. Please contact
Horizon Hobby or an authorized retailer with compatibility questions.
Support
At ARRMA we want you to love running your kit and make owning a high
performance RC car as simple as possible. If you have any questions about
running, maintaining, tuning or repairing your ARRMA product there are two
options for you to use to get help and advice. Visit ARRMA-RC.com for support, parts and upgrades for your kit. If you can’t
find what you’re looking for then you can always email us at supportUSA@ARRMA-
RC (USA) or support@ARRMA-RC.com (ROW)
24hrs a day and we will do our best to help you with your query.
Quick Start Guide
Remove Body
Charge Car Batteries – Not Included
*Not supplied.
Compatible USB Power Adaptor 5V/1A, 5V/2A, USB Quick Charge (QC) 2.0/3.0
NiMH 7C Spektrum Smart Battery LED Charger Codes
Battery Capacity | LED Behaviour |
---|---|
Less Than 25% | Yellow Single Flash |
25% – 75% | Yellow Double Flash |
76% – 99% | Yellow Triple Flash |
Complete 100% | Green LED (Solid) |
We recommend that you use a 20W+ USB Power Adaptor with QC 2.0/3.0 for the
quickest charge time of under 3 hours. Using a typical mobile phone USB Power
Adaptor (5V/1A, 5V/2A) will produce longer charge times.
When the charger is powered on, without a battery connected, the LED will
either be WHITE (slow charge mode) or BLUE (fast charge mode)
CAUTION: Do not use USB ports on computers/laptops. Only use USB Power
Adaptors from mains power sockets.
Install AA Batteries In Controller
CAUTION: Only charge rechargeable batteries. Charging non-rechargeable
batteries may cause the batteries to burst, resulting in injury to persons
and/or damage to property.
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to national regulations.
Fully Charged Batteries
Install Charged Batteries In Car
Steering Neutral
How to Drive
Connect ESC and Power On
Install Car Body
NOW GET SHREDDING!
Power Off
Storage
ALL SAFE…
UNTIL NEXT TIME!
Electronic Speed Controller (ESC)
If using LiPo batteries you must set the correct battery mode on the ESC (electronic speed controller) to prevent battery damage.
Throttle Setup
Do not move the throttle when switching the model on as the ESC will
automatically set the throttle neutral. A long beep will sound to confirm
setup.
ESC Specifications
Input Voltage | 6-7 NiMh (7.2-8.4v) / 2S Lipo (7.4v) | BEC Output | 6.0v/2A Max |
---|
ESC Status LED
LED off: Neutral throttle
LED blinking slowly: Partial Forward/Reverse/Brake
LED solidly on: Full Forward/Reverse/Brake
Low Voltage Cut Off
Battery Mode | NiMh | LiPo |
---|---|---|
Cut-off Voltage | 4.5v | 6.4v |
Factory Defaults
Battery Mode: NiMh
Reverse: On
ESC Tuning Options
The MEGA brushed ESC has two tuning options – battery mode and reverse lock
out. The setting of these modes can be changed by moving the position of the
setting ‘jumpers’
Temperature Protection
If the ESC temperature exceeds 80 degrees Celsius, the ESC will enter
temperature protection mode and the green status LED will blink. Once the ESC
has cooled down it will resume normal operation.
Battery Modes
If using LiPo batteries you must set the correct battery mode on the ESC
(electronic speed controller) to prevent battery damage.
Radio Gear
SLT3 3CH
2.4 GHZ DIGITAL RADIO SYSTEM
Steering Trim
ST Rate
Throttle Trim
Throttle Trim: factory default neutral, adjustment is not necessary.
Battery Status
If battery status LED is flashing, the batteries need to be replaced.
Factory Defaults
Binding
FCC ID: BRWSPMSLT300; BRWSPMSLR300
**** This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORISED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Approved under the verification provision of FCC Part 15 as a Class B Digital
Device.
This equipment complies with FCC and IC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 5mm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter
Caution: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this device.
** Hereby, Horizon Hobby, LLC declares that the device is in compliance
with the following: European Union Restriction of Hazardous Substances Recast
(RoHS2) Directive 2011/65/EU; European Union Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH) Directive 1907/2006
European Radio Equipment Directive (RED) 2014/53/EU
This product contains batteries that are covered under the 2006/66/EC European
Directive, which cannot be disposed of with normal household waste. Please
follow local regulations
A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance**.
Frequency Band: 2405-2474 MHz
Max EIRP: 8.30 dBm
Industry Canada Notice: IC: 6157A-SPMSLT300; 6157A-SPMSLR300
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s). 1.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. 2.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC and IC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 5mm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter
**** INSTRUCTIONS FOR DISPOSAL OF WASTE EQUIPMENT BY PRIVATE USERS IN THE EUROPEAN UNION: This symbol on the product or its packaging indicates this product must not be disposed of with other household waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a designated collection point for the recycling of waster electrical and electronic equipment. The separate collection and recycling of your waste equipment at time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or location where you purchased the product.
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
Vehicle does not move | Batteries are incorrectly installed in transmitter |
Check transmitter batteries and refit – see model/transmitter manual
Weak, damaged or no drive battery in model| Install fresh, charged batteries
Frayed or broken motor or ESC wires| Check condition, reconnect and insulate
ESC has shut down due to overheating| Stop driving and allow ESC or motor to
cool down
Electric motor is damaged| Replace with new unit – visit ARRMA-RC.com for advice and upgrades!
Waterproof ESC is damaged| Replace with new unit – visit ARRMA-RC.com for advice and upgrades!
Possible damage to transmission/drive-line| Check components and replace –
visit ARRMA-RC.com for advice
ESC low voltage cutoff has activated to protect batteries| Remove drive
battery, leave to cool down if necessary, and re-charge
Vehicle does not reverse| Waterproof ESC is damaged| Replace with new unit –
visit ARRMA-RC.com for advice and upgrades
Vehicle does not reverse| Transmitter throttle trim incorrectly set| Throttle
trim needs to be set to zero/neutral – see model/transmitter
manual
Vehicle drives without input| Neutral throttle position of ESC Unit incorrect|
Re calibrate the ESC
Battery damaged or not fully charged| Check condition, replace or recharge
Short runtime| Electric motor dirty or damaged| Clean, check condition and/or
replace – visit ARRMA-RC.com for more information
Incorrect ESC battery mode – voltage cutoff too high for the battery you are
using| Adjust the battery mode of the unit
Sluggish performance| Battery damaged or not fully charged| Check condition,
replace or recharge
Transmitter throttle trim incorrectly set| Throttle trim needs to be set to
zero/neutral – see model/transmitter
manual
Electric motor dirty or damaged| Clean, check condition and/or replace – visit
ARRMA-RC.com for more information
Drivetrain dirty or damaged| Clean, check condition and/or replace – visit
ARRMA-RC.com for more information
No control of vehicle or short range| Transmitter batteries are weak or fitted
incorrectly| Check transmitter batteries and refit – see model/transmitter
manual
Servo wires to receiver loose or connected incorrectly| Reinstall signal wires
to receiver
Transmitter and receiver unit are not ‘bound’ correctly| Transmitter and
receiver need to be bound – see model/transmitter manual
Steering/Throttle operation intermittent| ESC has shut down due to
overheating| Stop driving and allow ESC or motor to cool down
Transmitter and receiver unit are not ‘bound’ correctly| Check for sources of
interference and re-bind transmitter/receiver – see transmitter manual
Vehicle wanders left/right without steering input| Steering trim setting out|
Adjust steering trim – see model/ transmitter manual
Damaged steering components| Check components and replace – visit ARRMA-
RC.com for advice
Drivetrain dirty or damaged| Clean, check condition and/or replace – visit
ARRMA-RC.com for more information
Steering/Throttle operation reversed| Relevant channel of transmitter is
reversed| Reverse relevant channel on transmitter – see model/ transmitter
manual
Check that the wires from the ESC to the motor are connected correctly|
Reconnect in the correct orientation (red to red and black to black) ensuring
fit is tight; if not pinch female connector with pliers
Limited steering angle| Transmitter steering dual-rate set incorrectly| Adjust
transmitter dual-rate – see transmitter manual
Damaged steering components| Check components and replace – visit ARRMA-
RC.com for advice
Warranty Information
LIMITED WARRANTY
What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the
product purchased (the “Product”) will be free from defects in materials and
workmanship for a period of 2 years from the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii)
damage due to acts of God, accident, misuse, abuse, negligence, commercial
use, or due to improper use, installation, operation or maintenance, (iii)
modification of or to any part of the Product, (iv) attempted service by
anyone other than a Horizon Hobby authorized service center, (v) Product not
purchased from an authorized Horizon dealer, (vi) Product not compliant with
applicable technical regulations, or (vii) use that violates any applicable
laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR
REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER
ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY
MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be
that Horizon will, at its option, either (i) service, or (ii) replace, any
Product determined by Horizon to be defective. Horizon reserves the right to
inspect any and all Product(s) involved in a warranty claim. Service or
replacement decisions are at the sole discretion of Horizon. Proof of purchase
is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY,
REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT,
NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event
shall the liability of Horizon exceed the individual price of the Product on
which liability is asserted. As Horizon has no control over use, setup, final
assembly, modification or misuse, no liability shall be assumed nor accepted
for any resulting damage or injury. By the act of use, setup or assembly, the
user accepts all resulting liability. If you as the purchaser or user are not
prepared to accept the liability associated with the use of the Product,
purchaser is advised to return the Product immediately in new and unused
condition to the place of purchase.
Law
These terms are governed by Illinois law (without regard to conflict of law
principals). This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. Horizon reserves the right
to change or modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty
support or service. Once assembly, setup or use of the Product has been
started, you must contact your local distributor or Horizon directly. This
will enable Horizon to better answer your questions and service you in the
event that you may need any assistance. For questions or assistance, please
visit our website at www.horizonhobby.com ,
submit a Product Support Inquiry, or call the toll free telephone number
referenced in the Warranty and Service Contact Information section to speak
with a Product Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the
country you live and use the Product in, please use the Horizon Online Service
Request submission process found on our website or call Horizon to obtain a
Return Merchandise Authorization (RMA) number. Pack the Product securely using
a shipping carton. Please note that original boxes may be included, but are
not designed to withstand the rigors of shipping without additional
protection. Ship via a carrier that provides tracking and insurance for lost
or damaged parcels, as Horizon is not responsible for merchandise until it
arrives and is accepted at our facility. An Online Service Request is
available at http://www.horizonhobby.com/content/_service-center_render-
service-center. If you do not have internet access, please contact Horizon
Product Support to obtain a RMA number along with instructions for submitting
your product for service. When calling Horizon, you will be asked to provide
your complete name, street address, email address and phone number where you
can be reached during business hours. When sending product into Horizon,
please include your RMA number, a list of the included items, and a brief
summary of the problem. A copy of your original sales receipt must be included
for warranty consideration. Be sure your name, address, and RMA number are
clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a
LiPo battery, please contact the appropriate Horizon Product Support office.
Warranty Requirements
For Warranty consideration, you must include your original sales receipt
verifying the proof-of-purchase date. Provided warranty conditions have been
met, your Product will be serviced or replaced free of charge. Service or
replacement decisions are at the sole discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service will be completed and
payment will be required without notification or estimate of the expense
unless the expense exceeds 50% of the retail purchase cost. By submitting the
item for service you are agreeing to payment of the service without
notification. Service estimates are available upon request. You must include
this request with your item submitted for service. Non-warranty service
estimates will be billed a minimum of ½ hour of labor. In addition you will be
billed for return freight. Horizon accepts money orders and cashier’s checks,
as well as Visa, MasterCard, American Express, and Discover cards. By
submitting any item to Horizon for service, you are agreeing to Horizon’s
Terms and Conditions found on our website
http://www.horizonhobby.com/content/_service-center_render-service-
center.
ATTENTION: Horizon service is limited to Product compliant in the country
of use and ownership. If received, a non-compliant Product will not be
serviced. Further, the sender will be responsible for arranging return
shipment of the un-serviced Product, through a carrier of the sender’s choice
and at the sender’s expense. Horizon will hold non-compliant Product for a
period of 60 days from notification, after which it will be discarded.
JOIN OUR GLOBAL ARRMA COMMUNITY
https://www.facebook.com/ARRMARChttp://www.arrma-rc.com/tvhttp://www.arrma- rc.com/hofhttps://twitter.com/ARRMARChttps://www.youtube.com/user/ARRMARChttps://www.instagram.com/arrmarc/
ARB100028421.2
ARRMA-RC.COM
©2024 Horizon Hobby, LLC. ARRMA RC is a trade name of Horizon Hobby Ltd.
Horizon Hobby Ltd is a subsidiary of Horizon Hobby, LLC. ARRMA, the ARRMA
logo, Granite and Senton are trademarks or registered trademarks of Horizon
Hobby, LLC. The Spektrum trademark is used with permission of Bachmann
Industries, Inc. All other trademarks, service marks and logos are property of
their respective owners.
References
- ARRMA RC Cars and RC Trucks - Designed Fast, Designed Tough | ARRMA
- Ferngesteuerte Flugmodelle, Autos, Trucks, Hubschrauber, Boote und Fernsteuerungen | Horizon Hobby
- Robinson+Cole
- ARRMA RC Cars and RC Trucks - Designed Fast, Designed Tough | ARRMA
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Cars, RC Trucks, RC Airplanes, Model Trains, and Slot Cars at Tower Hobbies
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>