Superior Life PQL-84033 LED Stealth Fixtures Instruction Manual

Superior Life PQL-84033 LED Stealth Fixtures

PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read the instructions before you install and use the luminaire.

WARNING, CAUTIONS, AND OPERATING INSTRUCTIONS

• To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
  Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.

• Commercial installation, service, and maintenance of luminaires should be performed by a qualified licensed electrician.

• For The installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.

• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

• Do not cover any part of the fixture; this can cause overheating.

WARNING: RISK OF FIRE OR ELECTRICAL SHOCK

• Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
• Turn off the power when you perform any maintenance.
• Verify that the supply voltage is correct by comparing it with the luminaire label information.
• Make all electrical and grounded connections in accordance with the National Electrical Code and any applicable local code requirements.
• All wiring connections should be capped with UL-approved wire connectors.

CAUTION: RISK OF INJURY

• Avoid direct eye exposure to the light source while it is on.
• Account for small parts and destroy packing material, as these may be hazardous to children.
• Suitable for Wet locations.

WARNING: DISCONNECT POWER BEFORE INSTALLING OR SERVICING.
The product requires a top-mounted shorting cap or an optional twist-lock photocell installed to operate.

TRUNNION MOUNTING (POLE)

TRUNNION MOUNTING (WALL)

SLIP FITTER MOUNTING

POLE MOUNTING

SENSOR INSTALLATION FOR POLE BRACKET

Support

PREMIUM QUALITY LIGHTING®•
www.PQLighting.com
© P.Q.L., Inc. • 2285 Ward Avenue • Simi Valley, CA 93065
800-323-8107
Specifications are subject to change without notice. Photos and line drawings may not be to scale and are for general reference only.

References

• Homepage | Premium Quality Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>