APATOR TH 480 Bi Metallic Thermostat Instruction Manual
- June 1, 2024
- APATOR
Table of Contents
Bi-metallic thermostat
TH 480
Application
The TH 480 thermostat when installed with suitable equipment is intended to control water temperature, e.g. in DHW storage tanks connected to water heating boilers. It is a reliable and cost-effective mechanical system which controls temperature, reduces energy consumption and reduces operating costs. The thermostat provides protection against overheating and overloading of the application.
Product features
- The TH 480 thermostat comprises a sensor and an electrical switch system sealed in the brass body
- A thermostat is available, as version Z (normally closed) or R (normally open)
- M22x1.5 thread with size 22×27 O-ring
- The connection terminals are 6.3×0.8 mm flat tabs electrically insulated from the body
- The thermostat head and flat tab terminals are permanently integrated with the body
Specifications
| Model | TH 480 |
|---|---|
| Rated temperature range | 35 – 115°C |
| Rated contact capacity with resistive load | 230 V, max. 4 A AC (max. 10,000 |
cycles)
230 V, 1 A AC (max. 50,000 cycles)
Rated contact capacity with inductive load| (cosΦ=0.65), 230 V, 1 A AC (max.
10,000 cycles)
Contact resistance| Max. 100 mΩ
Connection terminals| 6,3×0,8 mm
Apator Metra s.r.o.
Havlíčkova 919/24
787 01 Šumperk, Czechy
phone +420 601 594 929
janickova@metra-su.cz
This publication is indicative only and should not be construed as a
commercial offer under the Polish Civil Code.
2023.138.EN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>